Intermec EasyLAN 100E Manuale utente

EasyLAN 100e

Ethernet Adapter

快速入门指南

Adaptateur Ethernet

Ethernet-Adapter

이더넷 어댑터

Adaptador Ethernet

Ethernet-адаптер

Adaptador Ethernet

Quick Start Guide

快速入门指南

Guide de démarrage rapide

Kurzanleitung

빠른 시작 안내서

Manual de Consulta Rápida

Краткое руководство

Guía de comienzo rápido

Contents

EasyLAN 100e Ethernet Adapter Quick Start Guide . . . . . .3

EasyLAN 100e 以太网适配器快速入门指南 . . . . . . . . . .8

Adaptateur Ethernet EasyLAN 100e -

Guide de mise en route rapide . . . . . . . . . . . . . . . . . . . .13

Kurzanleitung für EasyLAN 100e Ethernet-Adapter . . . . . .18

EasyLAN 100e 이더넷 어댑터 주요 정보 . . . . . . . . .24

Manual de Consulta Rápida do Adaptador Ethernet

EasyLAN 100e. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Краткое руководство по эксплуатации

Ethernet-адаптера EasyLAN 100e . . . . . . . . . . . .34

Información importante del adaptador Ethernet

EasyLAN 100e. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

EasyLAN 100e Ethernet Adapter Quick

Start Guide

Introducing the EasyLAN 100e Adapter

The external EasyLAN 100e Ethernet Adapter (P/N 225-746-

001) lets you share your available printer resources with everyone

connected to your Ethernet network.

EasyLAN 100e Ethernet Adapter

You can connect this external adapter to these printers:

• EasyCoder PC4

• EasyCoder PC41

•PF8t

•PF8d

The Adapter supports several key network and Ethernet

standards, including the following:

• The Adapter has one (1) 10BaseT/100BaseTx auto-sensing

Ethernet port that supports standard Ethernet/Fast Ethernet

connections—twisted pair 10BaseT and 100BaseTx (RJ45

connector).The Adapter is compliant with IEEE802.3 and

IEEE802.3u standards.

• The wired network interface supports full and half duplex

operation for both 10 Mbps, 10BaseT and 100 Mbps,

100BaseTx.

Out of the Box

The Adapter draws its power from the connected printer (+5V on

pin 18). Your printer comes with the following:

• EasyLAN 100e Ethernet Adapter

• This guide (P/N 930-193-002) and Important EasyLAN 100e

Information

EasyLAN 100e Ethernet Adapter Connectors

Installing the Adapter

Before you install the Adapter, make sure that you have the

appropriate length Ethernet cable, and make sure that you have

loaded media and ribbon into the printer. For help, see the quick

start guide for your printer.

Connecting to Your Network

This section explains how to physically connect the adapter to

the printer and your network.

Connectors, LED, and Button Descriptions

Part Description

10BaseT/100BaseTx Provides a standard Ethernet/Fast Ethernet

interface for network connection.

Parallel port connector This single high-speed parallel port connects

directly to an Intermec printer a parallel port.

LED The LED provides information on power-up

diagnostics and network activity.

Test button Use the test button to:

• Print a test label that shows some of the

Adapter settings. The Adapter supports IPL,

FP/DP, and ESim languages.

• Reset the Adapter settings to the factory

default settings.

For more help, see “Printing a Test Label” later

in this guide.

LED

10BaseT/100BaseTx

Ethernet port

Test

button

Parallel port

connector

To connect the Adapter

1Turn off the printer.

Connecting the Adapter to Your Printer

2Plug the parallel port connector on the Adapter into the

parallel port on the printer.

3Connect one end of an Ethernet cable to the 10BaseT/

100BaseTx Ethernet port on the adapter.

4Connect the other end of the cable to an Ethernet port for

your network.

To connect to your network

• Turn on the printer. The LED on the Adapter flashes and

then turns off.

Note: Although you can connect this Adapter to

many different Intermec printers, the illustration in

the next procedure shows the PF8t.

Parallel

port

connector

Parallel

port

10BaseT/100BaseTx

port

Ethernet

cable

Printing a Test Label

After the LED turns off, print a test label to make sure that the

Adapter is working. The test label information includes the

Adapter’s current IP address and some network statistics.

To print a test label

1Insert a small, straightened paper clip into the Test button.

2Press and release the button. The printer prints one label with

the current Ethernet and network settings of the adapter.

Getting the IP Address

If your network supports DHCP, the Adapter automatically

connects to the server and obtains its TCP/IP settings, including

an IP address.

You can use ARP (Address Resolution Protocol) to assign an IP

address to the adapter if your network does not use DHCP or if

you want to configure a static IP address.

To download the IP address using a Windows-based PC

1Open a command prompt (MS-DOS®) window.

2Type the following:

arp -s nnn.nnn.nnn.nnn nn-nn-nn-nn-nn-nn

ping nnn.nnn.nnn.nnn

arp -d nnn.nnn.nnn.nnn

where:

nnn.nnn.nnn.nnn is the IP address for the Adapter

nn-nn-nn-nn-nn-nn is the MAC address for the Adapter.

Note: The MAC address is printed on the underside

of the Adapter. You need this address when you

configure the printer settings.

When you execute the PING command for the first

time, you may experience a longer than usual response

time.

To download the IP address using a UNIX host

• Type the following:

arp -s host_name nn:nn:nn:nn:nn:nn temp

ping host_name

where:

host_name is the name mapped to the Adapter’s IP address.

The default name is INTERMEC_nnnnnn, and

nnnnnn is the last six digits of the MAC address.

The full MAC address for the Adapter is

nn:nn:nn:nn:nn:nn.

The host will return INTERMEC_0B766F is alive or a similar

message. This message indicates that the address has been set and

communication established.

The ARP command can vary between different UNIX systems.

Berkeley System Distribution (BSD) type systems expect the host

name and node address in reverse order. Furthermore, IBM

AIX®systems require the additional argument ether.

Managing and Configuring Advanced Features

Use your web browser to manage or configure more advanced

parameters on the Adapter.

•Openyourwebbrowser.

• Type in the Adapter’s IP address (printed on the test label; see

“To print a test label” on page 6).

For more help, refer to the EasyLAN 100e Ethernet Adapter User’s

Guide.

EasyLAN 100e 以太网适配器快速

入门指南

EasyLAN 100e 适配器简介

外置 EasyLAN 100e 以太网适配器 (P/N 225-746-001) 让

您能够与连接到以太网络的所有用户共享可用的打印资

源。

EasyLAN 100e 以太网适配器

您可以将此外置适配器连接到下列打印机上：

• EasyCoder PC4

• EasyCoder PC41

• PF8t

• PF8d

此适配器支持几种主要的网络和以太网标准，包括以下

内容：

•此适配器具有一个 (1) 支持标准以太网 / 快速以太网

连接的 10BaseT/100BaseTx 自动感应以太网端口 _双绞

线 10BaseT 和 100BaseTx （RJ45 接头），并且符合

IEEE802.3 和 IEEE802.3u 标准。

•有线网络接口支持 10 Mbps 、10BaseT 和 100 Mbps、

100BaseTx 全双工和半双工操作。

打开包装箱

此适配器由其所连接的打印机供电（pin 18，+5V）。打印机

随附以下内容：

• EasyLAN 100e 以太网适配器

• 本指南 (P/N 930-193-002)

• Important EasyLAN 100e Information

EasyLAN 100e 以太网适配器接口

安装适配器

在安装适配器之前，请确认您拥有长度合适的以太网电

缆，并已将介质和色带装入打印机中。如需帮助，请参阅

打印机的快速入门指南。

连接到网络

此部分内容说明如何将适配器连接到打印机和网络上。

接口、

LED

和按钮说明

部件说明

10BaseT/100BaseTx 为网络连接提供标准的以太网 /快速以太

网接口。

并行端口接口此单一的高速并行端口可直接连接到

Intermec 打印机的并行端口上。

LED 此 LED 可提供通电诊断和网络活动的相关

信息。

测试按钮此测试按钮用于下列目的：

• 打印可展示某些适配器设置的测试标

签。此适配器支持 IPL、FP/DP 和 ESim

语言。

• 将适配器设置重置到出厂默认设置。

如需更多帮助，请参阅本指南后面的 “打

印测试标签”。

注：您可以将适配器连接到许多不同的

Intermec 打印机上，下面步骤中仅以 PF8t 为例

进行说明。

LED

10BaseT/100BaseTx

ҹ໾㔥ッষ

⌟䆩ᣝ䪂

ᑊ㸠ッষ

᥹ষ

连接适配器

1关闭打印机。

将适配器连接到打印机上

2将适配器的并行端口接口插入打印机的并行端口。

3将以太网电缆的一端连接到适配器的 10BaseT/100BaseTx

以太网端口。

4将电缆的另一端连接到网络的以太网端口。

连接到网络

• 开启打印机。适配器上的 LED 会闪烁，然后熄灭。

打印测试标签

LED 熄灭后，打印一张测试标签，以确认适配器处于工作

状态。测试标签信息包括适配器当前的 IP 地址和一些网络

统计信息。

注：MAC 地址打印在适配器的下侧。您需要使

用此地址配置打印机设置。

ᑊ㸠ッষ

᥹ষ

ᑊ㸠

ッষ

10BaseT/100BaseTx

ッষ

ҹ໾㔥⬉㓚

Altri manuali per EasyLAN 100E

Indice

Lingue:

Altri manuali Intermec Adattatore

Intermec

Intermec BU-2073-J Manuale utente

Intermec

Intermec CK60 Ethernet Multidock Manuale utente

Intermec

Intermec EasyLAN 100E Manuale utente

Intermec

Intermec EasyLAN 10I2 Manuale utente

Intermec

Intermec AN3 Manuale utente

Intermec

Intermec Trakker Antares 2400 Manuale utente

Intermec

Intermec L5020 Manuale utente

Intermec

Intermec CK60 Ethernet Multidock Manuale utente

Intermec

Intermec CN51 Manuale utente

Intermec

Intermec CN3 Series Manuale utente

Intermec

Intermec AE37 Manuale utente

Intermec

Intermec 1004UA02 Manuale utente

Intermec

Intermec Sabre 1552 Scanner Manuale utente

Intermec

Intermec EasyLAN 10I2 Manuale utente

Intermec

Intermec CN70 RFID Manuale utente

Intermec

Intermec EasyLAN 10I2 Manuale utente

Intermec

Intermec CN50 Manuale utente

Intermec

Intermec CN70 RFID Manuale utente

Intermec

Intermec CN3 Series Manuale utente

Intermec

Intermec AA23 Manuale utente

Intermec

Intermec ColorCoder 901 Manuale utente

Intermec

Intermec CK60 Ethernet Multidock Manuale utente

Intermec

Intermec 1700 Series Manuale utente

Intermec

Intermec USB Bluetooth Adapter Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente