Intermec CN2B Manuale utente
Intermec Gateway
User’s Guide
ii Intermec Gateway User’s Guide
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave. W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing
customers to operate and service Intermec-manufactured equipment and is not to be
released, reproduced, or used for any other purpose without written permission of
Intermec.
Information and specifications contained in this document are subject to change
without prior notice and do not represent a commitment on the part of Intermec
Technologies Corporation.
©2003-2007 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook,
CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, INCA
(under license), i-gistics, Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN,
Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile
Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either
trademarks or registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patent applications
pending.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
Intermec Gateway User’s Guide iii
Document Change Record
This page records changes to this document. The document was originally released as
version 001.
Version Date Description of Change
002 06/2003 Updated to support Intermec Gateway v1.1 release: changed
default user name and password for accessing the
Configuration and Management pages.
003 03/2004 Updated to support Intermec Gateway v1.3 release: adding
TCPComm, which enables UDP Plus and WTP devices to
communicate with a TCP/IP host application through the
Intermec Gateway.
004 08/2004 Updated to change references from the G4X00 to the
Intermec Application Server. The Intermec Gateway comes
loaded on the Intermec Application Server. Your Intermec
Application Server may be a DCS 300D, DCS 301D, DCS
302D, G4000A, or G4000B.
005 08/2005 Updated to support Intermec Gateway v1.5. Increased the
maximum number of simultaneous sessions to 300. Added
that if you upgrade software with the Server Applications
CD, your configuration is saved during the upgrade.
Recommended that Trakker Antares UDP Plus terminals
run firmware version 8.01.13 or later. Added a chapter on
using the Intermec Gateway in a dcBrowser environment.
Clarified the differences between WTP and UDP Plus start-
up packets. Removed references to G4100 and Wavelink
Avalanche. Added the CK31 handheld computer to
Chapters 1 and 2.
006 05/2007
Updated to support dual-session TE 2000 on Trakker
Antares terminals over the UDP Plus network. Added the
restriction that UDP Plus device logical names may be a
maximum of 14 characters. Added information for newer
computer products such as the CN2B, CN3, and CV30.
iv Intermec Gateway User’s Guide
Contents
Intermec Gateway User’s Guide v
Contents
Before You Begin ........................................................................................ix
Safety Icons.................................................................................................ix
Global Services and Support........................................................................ix
Warranty Information...................................................................ix
Web Support ................................................................................ ix
Telephone Support ........................................................................x
Who Should Read This Document? ............................................................ xi
Getting Help...............................................................................................xi
User’s Guide .................................................................................xi
Procedural Help............................................................................ xi
Context-Sensitive Help ...............................................................xiii
Related Documents...................................................................................xiii
Using the Intermec Gateway in a Telnet Environment...............1
The Intermec Gateway in a Telnet Environment ........................................................2
Determining the Maximum Number of Sessions Supported.........................3
Defining the Telnet Host ...........................................................................................3
Installing the Intermec Gateway Licenses .....................................................4
Opening the Intermec Gateway Home Page.................................................4
Defining an IP Host and Telnet Port ...........................................................6
Defining the Downline Network................................................................................8
Configuring UDP Plus.................................................................................9
Configuring WTP......................................................................................12
Configuring the Intermec Gateway to Automatically Start........................................14
Saving and Activating Changes .................................................................................15
Configuring the Data Collection Devices for Telnet TE ...........................................16
Setting Up the UDP Plus Devices ..............................................................17
Setting Up the WTP Devices .....................................................................18
Starting the Telnet TE Applications ...........................................................20
Trakker Antares UDP Plus Terminals ..........................................21
5020s, CK30s, CK31s, CN3s, CV30s, CV60s, and 730s .............22
WTP Devices...............................................................................22
Saving Your Configuration During a Software Upgrade............................................22
1
Contents
vi Intermec Gateway User’s Guide
Using the Intermec Gateway in a Native Environment ............23
The Intermec Gateway in a Native Environment......................................................24
Determining the Maximum Number of Sessions Supported.......................25
About the Native Async Serial Host ...........................................................25
About the Native Sockets Interface.............................................................26
Converting Native Serial Applications to Native Sockets..............26
Sending Device IDs to the Host...................................................26
Unsupported Native Sockets Command ......................................27
Defining the Native Host .........................................................................................27
Installing the Intermec Gateway Licenses ...................................................28
Opening the Intermec Gateway Home Page...............................................28
Defining the Native Async Serial Host .......................................................30
Defining the Native Socket Host................................................................31
Defining the Downline Network..............................................................................33
Configuring UDP Plus...............................................................................34
Configuring WTP......................................................................................37
Configuring the Intermec Gateway to Automatically Start........................................39
Saving and Activating Changes.................................................................................40
Configuring the Data Collection Devices for Native TE...........................................41
Setting Up the Trakker Antares, 5020, CK30, and CK31 UDP Plus
Devices..................................................................................................42
Setting Up the WTP Devices .....................................................................42
Starting the Native Applications.................................................................44
Trakker Antares UDP Plus Terminals..........................................44
5020, CK30, and CK31 UDP Plus Devices.................................45
WTP Devices...............................................................................45
Writing Native Host Applications ............................................................................46
Different Start-Up Packets .........................................................................46
Displays Work Differently .........................................................................48
Saving Your Configuration During a Software Upgrade ...........................................49
2
Contents
Intermec Gateway User’s Guide vii
Using the Intermec Gateway in a dcBrowser
Environment..........................................................................................................49
The Intermec Gateway in a dcBrowser Environment ................................................50
Determining the Maximum Number of Sessions Supported.......................52
Defining the dcBrowser Gateway..............................................................................52
Installing the Intermec Gateway Licenses ...................................................53
Installing the dcBrowser Gateway Licenses .................................................53
Opening the Intermec Gateway Home Page...............................................53
Defining the dcBrowser Gateway as a Host ................................................56
Defining the Downline Network..............................................................................58
Configuring UDP Plus...............................................................................59
Configuring WTP......................................................................................62
Configuring the dcBrowser Gateway.........................................................................64
Configuring Both Gateways to Automatically Start...................................................66
Saving and Activating Changes .................................................................................67
Configuring the Data Collection Devices for dcBrowser ...........................................68
Writing dcBrowser Applications ...............................................................................68
Saving Your Configuration During a Software Upgrade............................................68
Using the Intermec Gateway in a TCP/IP Client/Server
Environment..........................................................................................................69
The Intermec Gateway in a TCP/IP Client/Server Environment ..............................70
Determining the Maximum Number of Sessions Supported.......................71
Defining the TCPComm Host Application..............................................................71
Installing the Intermec Gateway Licenses ...................................................71
Opening the Intermec Gateway Home Page...............................................72
Configuring the Listen Port........................................................................74
Defining an IP Host...................................................................................75
Adding a New TCPComm Host Application .............................................76
3
4
Contents
viii Intermec Gateway User’s Guide
Defining the Downline Network..............................................................................77
Configuring UDP Plus...............................................................................78
Configuring WTP......................................................................................81
Configuring the Intermec Gateway to Automatically Start........................................82
Saving and Activating Changes.................................................................................83
Configuring the Data Collection Devices for TCP/IP Client/Server .........................84
Writing TCP/IP Client/Server Applications ...............................................84
Sending Data From the Host Application ..................................................84
Sending Data From the Device ..................................................................86
Saving Your Configuration During a Software Upgrade ...........................................86
Using Multiple Gateways for Maximum Up-Time.........................87
Understanding Auto Fallback and the Intermec Gateway .........................................88
Using Auto Fallback in TE 2000 Terminal Emulation .............................................89
Configuring the Intermec Gateways ...........................................................89
Configuring the TE Client.........................................................................89
Using Auto Fallback in UDP Plus Terminals............................................................90
Configuring the Intermec Gateways ...........................................................90
Configuring the Trakker Antares UDP Plus Terminals ..............................90
Protecting Your Data Collection Infrastructure.........................................................91
Troubleshooting the Intermec Gateway..............................................93
Troubleshooting.......................................................................................................94
5
6
123Before You Begin
Intermec Gateway User’s Guide ix
Before You Begin
This section introduces you to cautions and notes and sources of
additional product information. A documentation roadmap is
also provided to guide you in finding the appropriate
information.
Safety Icons
The cautions and notes in this manual use the following format.
A caution alerts you to an operating procedure, practice,
condition, or statement that must be strictly observed to
prevent equipment damage or destruction, or corruption or
loss of data.
Note: Notes are statements that either provide extra
information about a topic or contain special instructions for
handling a particular condition or set of circumstances.
Global Services and Support
Warranty Information
To understand the warranty for your Intermec product, visit the
Intermec web site at www.intermec.com and click Service &
Support. The Intermec Global Sales & Service page appears.
From the Service & Support menu, move your pointer over
Support, and then click Warranty.
Disclaimer of warranties: The sample code included in this
document is presented for reference only. The code does not
necessarily represent complete, tested programs. The code is
provided “as is with all faults.” All warranties are expressly
disclaimed, including the implied warranties of merchantability
and fitness for a particular purpose.
Web Support
Visit the Intermec web site at www.intermec.com to download
our current manuals in PDF format. To order printed versions
of the Intermec manuals, contact your local Intermec
representative or distributor.
Before You Begin123
x Intermec Gateway User’s Guide
Visit the Intermec technical knowledge base (Knowledge
Central) at intermec.custhelp.com to review technical
information or to request technical support for your Intermec
product.
Telephone Support
These services are available from Intermec Technologies
Corporation.
Available Services
Service
Description
In the U.S.A. and Canada
call 1-800-755-5505 and
choose this option
Order
Intermec
products
•Place an order.
•Ask about an existing
order.
1 and then choose 2
Order
Intermec
media
Order printer labels and
ribbons.
1 and then choose 1
Order spare
parts
Order spare parts. 1 or 2 and then choose 4
Technical
Support
Talk to technical support
about your Intermec
product.
2 and then choose 2
Service •Get a return
authorization number
for authorized service
center repair.
•Request an on-site
repair technician.
2 and then choose 1
Service
contracts
•Ask about an existing
contract.
•Renew a contract.
•Inquire about repair
billing or other service
invoicing questions.
1 or 2 and then choose 3
Outside the U.S.A. and Canada, contact your local Intermec
representative. To search for your local representative, from the
Intermec web site, click Contact.
Altri manuali per CN2B
4
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali Intermec Portale
Manuali Portale popolari di altre marche
LST
LST M500RFE-AS Manuale utente
Kinnex
Kinnex Media Gateway Manuale utente
2N Telekomunikace
2N Telekomunikace 2N StarGate Manuale utente
Mitsubishi Heavy Industries
Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuale utente
ZyXEL Communications
ZyXEL Communications ZYWALL2 ET 2WE Manuale utente
Telsey
Telsey CPVA 500 - SIP Manuale utente
