Intermec MicroBar 9710 Manuale utente

P/N 055875-004

9710 and 9720

Wedge Readers

User’s

Manual

Intermec Technologies Corporation

6001 36th Avenue West

P.O. Box 4280

Everett, WA 98203-9280

U.S. service and technical support: 1-800-755-5505

U.S. media supplies ordering information: 1-800-227-9947

Canadian service and technical support: 1-800-688-7043

Canadian media supplies ordering information: 1-800-268-6936

Outside U.S. and Canada: Contact your local Intermec service

supplier.

The information contained herein is proprietary and is provided

solely for the purpose of allowing customers to operate and/or

service Intermec manufactured equipment and is not to be released,

reproduced, or used for any other purpose without written

permission of Intermec.

Information and specifications in this manual are subject to change

without notice.

1997 by Intermec Technologies Corporation

The word Intermec, the Intermec logo, JANUS, IRL, TRAKKER,

Antares, Duratherm, Precision Print, PrintSet, Virtual Wedge, and

CrossBar are either trademarks or registered trademarks of Intermec

Corporation.

Throughout this manual, trademarked names may be used. Rather

than put a trademark (or ) symbol in every occurrence of a

trademarked name, we state that we are using the names only in an

editorial fashion, and to the benefit of the trademark owner, with no

intention of infringement.

Manual Change Record

This page records the changes to this manual. The manual was

released at Revision A. Please note that since the release of this

manual, we have switched to a numbered revision system.

Revision Date Description of Change

B 8/91 Glossary, Index and information on multiple key

remapping were added.

-001 12/93 A new parameter was added to UPC/EAN

code. You can decode UCC/EAN 128 from

Code 128 symbology. Some other minor

changes were made to Chapter 3.

-002 7/95 Added one bar code (supplemental required) to

the fourth parameter of the UPC/EAN

symbology on page 3-34 and one correction to

page 3-24.

-003 7/97 Added information about ISBT 128 bar code

symbology. Also combined the 9710 and 9720

manuals into one manual.

-004 11/97 Corrected keyboard mapping tables in

Appendix.

Code 39

Contents

Manual Change Record iii

Before You Begin ix

Warranty Information ix

Safety Summary ix

About This Manual x

Other Intermec Manuals xii

Getting Started

Preparing for Installation 1-3

Connecting the Reader to the Workstation 1-4

Installing the Reader 1-5

Connecting an Input Device 1-6

Using a Power Supply 1-7

Is Additional Power Required? 1-7

Checking Connections 1-8

Applying Power 1-9

Identifying the Workstation Type 1-9

Checking Communications 1-10

Troubleshooting 1-11

Mounting the Reader 1-11

Operating the Reader

How to Use the Reader 2-3

Reading Bar Codes 2-4

Using Reader Commands 2-5

9710 and 9720 Wedge Readers Users Manual

CODE39

Backspace (Destructive) 2-5

Change Configuration 2-5

Clear 2-5

Default Configuration 2-6

Enter 2-6

Enter Accumulate 2-6

Exit Accumulate 2-7

Reset 2-7

Transmit Message 2-7

External Headphone/Speaker Jack 2-8

9720 Serial Port 2-8

Status Beeps 2-8

Configuring the Reader

Default Reader Configuration 3-3

Configuration Parameters 3-6

Beeper Volume 3-6

Caps Lock 3-6

Command Processing 3-7

Data Redirection 3-10

Wait Character 3-11

Wait Time 3-12

Intercharacter Delay 3-15

Preamble 3-15

Postamble 3-19

Scanner Trigger 3-21

Scanner Mode 3-21

Scanner Timeout 3-22

Voting 3-23

Bar Code Symbologies 3-24

Code 11 3-24

Code 39

Contents

vii

Code 39 3-24

Code 49 3-29

Code 93 3-30

Code 128 and ISBT 128 3-31

Code 16K 3-33

Codabar 3-34

Interleaved 2 of 5 Code 3-36

2 of 5 Code 3-37

Plessey Code 3-39

MSI Code 3-39

Universal Product (UPC)/European Article

Numbering (EAN) Codes 3-41

Customizing ASCII to Keyboard Equivalents 3-45

Configuring the 9720 Serial Port

Connecting to the Serial Port 4-3

Connecting a Portable Reader 4-4

Connecting a Scale 4-5

Uploading Data 4-6

Uploading Data From a Portable Reader 4-6

Uploading Data From a Scale 4-7

Serial Port Configuration Parameters 4-8

Baud Rate 4-8

Parity 4-8

Data Bits 4-9

Stop Bits 4-9

Timeout Delay 4-10

Echo 4-11

Flow Control 4-11

RXEOM 4-12

TXEOM 4-13

Solicitation Message 4-14

9710 and 9720 Wedge Readers Users Manual

CODE39

viii

Data Edit Application

Running Data Edit 5-3

Using Data Edit Configuration Parameters 5-3

Application Program 5-3

Window 5-4

Data Begin and Data End 5-5

Data Source 5-7

Data Identifier 5-7

User-Defined Pattern 5-9

Specifications

Mechanical Specifications A-3

Environmental Specifications A-3

Keyboard Equivalent Tables A-3

PC/Workstation Keyboard Mapping A-4

Twinax/Coax Terminal Keyboard Mapping A-5

ASCII Terminal Keyboard Mapping A-6

ASCII Characters Table A-7

Glossary

Index

CODE39

Before You Begin

This section introduces you to standard warranty provisions, safety

precautions, document formatting conventions, and sources of

additional product information. A documentation roadmap is also

provided to guide you in finding the appropriate information.

Warranty Information

To receive a copy of the standard warranty provision for this

product, contact your local Intermec support services organization.

In the U.S. call 1-800-755-5505, and in Canada call 1-800-688-7043.

Otherwise, refer to the Worldwide Sales & Service list that ships with

this manual for the address and telephone number of your Intermec

sales organization.

Safety Summary

Your safety is extremely important. Read and follow all warnings

and cautions in this book before handling and operating Intermec

equipment. You can be seriously injured, and equipment and data

can be damaged if you do not follow the safety warnings and

cautions.

Do not repair or adjust alone

Do not repair or adjust energized

equipment alone under any circumstances. Someone capable of

providing first aid must always be present for your safety.

First aid

Always obtain first aid or medical attention immediately

after an injury. Never neglect an injury, no matter how slight it

seems.

Resuscitation

Begin resuscitation immediately if someone is injured

and stops breathing. Any delay could result in death. To work on or

near high voltage, you should be familiar with approved industrial

first aid methods.

9710 and 9720 Wedge Readers Users Manual

CODE39

Energized equipment

Never work on energized equipment unless

authorized by a responsible authority. Energized electrical equipment

is dangerous. Electrical shock from energized equipment can cause

death. If you must perform authorized emergency work on energized

equipment, be sure that you comply strictly with approved safety

regulations.

About This Manual

This manual contains information necessary to install, operate,

configure, troubleshoot, and maintain the 9710 and 9720 Wedge

Readers.

What You Will Find in This Manual

This table summarizes the information in each chapter of this

manual:

For Information On Refer To

Installing the reader Chapter 1, “Getting Started.” This chapter tells you

how to install the reader in your data collection

system, configure the reader for your specific

workstation, and check for communications.

Operating the

reader

Chapter 2, “Operating the Reader.” This chapter

explains the commands you need to use to operate

the reader.

Configuring the

reader

Chapter 3, “Configuring the Reader.” This chapter

contains all of the configuration parameters that

you can use to customize reader operation to meet

your specific system needs.

Using the 9720 serial

port

Chapter 4, “Configuring the 9720 Serial Port.” This

chapter describes how to use the serial port on the

9720 reader to communicate with a portable reader

or a scale.

Using the Data Edit

application

Chapter 5, “Data Edit Application.” This chapter

tells you how to use Data Edit to strip specific

characters from a data record before transmitting

that record to a workstation, portable reader, or

scale.

Terms and Conventions

The following special terms and conventions occur throughout this

manual.

Altri manuali per MicroBar 9710

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Intermec Scanner

Intermec

Intermec SG10T Manuale utente

Intermec

Intermec ScanPlus 1800ST Manuale utente

Intermec

Intermec SE1022 Manuale utente

Intermec

Intermec IF61 Manuale

Intermec

Intermec MaxiScan 2400 Manuale utente

Intermec

Intermec MaxiScan 2100 Manuale utente

Intermec

Intermec MicroBar NX Manuale utente

Intermec

Intermec SR30 Manuale utente

Intermec

Intermec IV7 Manuale utente

Intermec

Intermec Trakker Antares 2420 Manuale utente

Intermec

Intermec SG20T Manuale utente

Intermec

Intermec Sabre 1551E Manuale utente

Intermec

Intermec Trakker Antares 2480 Manuale utente

Intermec

Intermec Sabre 1545 Manuale

Intermec

Intermec SR31T Manuale utente

Intermec

Intermec MaxiScan 2500 Manuale utente

Intermec

Intermec MaxiScan 3100 Manuale utente

Intermec

Intermec MaxiScan 2220 Manuale utente

Intermec

Intermec 1550 Series Manuale utente

Intermec

Intermec MaxiScan 3300 Manuale utente

Intermec

Intermec Sabre 1551B Manuale utente

Intermec

Intermec SR61 Manuale utente

Intermec

Intermec Sabre 1514 Manuale

Intermec

Intermec ScanPlus 1800ST Manuale utente

Manuali Scanner popolari di altre marche

Plustek

Plustek Scanner Manuale utente

Z/I Imaging

Z/I Imaging PhotoScan 2001 Manuale utente

Renkforce

Renkforce DS100-5M Manuale utente

Image Access

Image Access WideTEK A2 Manuale utente

Canon

Canon imageFORMULA CR-120N Manuale utente

Fujitsu

Fujitsu FI-4860C2 Manuale utente

GeoSlam

GeoSlam ZEB Horizon Istruzioni per l'installazione

Kodak

Kodak i5800 Scanner Manuale utente

Kodak

Kodak i7300 Manuale utente

Revopoint

Revopoint POP Manuale utente

Fujitsu

Fujitsu fi-4860C Manuale utente

Eddyfi Technologies

Eddyfi Technologies Floormap X Manuale utente

Faselase

Faselase F6 Manuale utente

Fujitsu

Fujitsu CardMinder Manuale utente

Uniden

Uniden BC340CRS Manuale utente

Infinite Peripherals

Infinite Peripherals INFINEA TAB M Manuale utente

Mustek

Mustek PageExpress 4800 Pro Manuale utente

Optex

Optex 750830 Manuale utente