Interpack TWA 1000-M Manuale utente
TWA 1000-M
Manual Water Activated Taper
For Machines Starting With Serial Number U9800T XX X XXX
For All Other Serial Numbers, Please Contact Customer Service
@ 800-474-8273 (Menu 3)
OPERATION MANUAL & PARTS LISTS
This Manual Also Available at www.intertapepolymer.com
U9800TW UDM 9800
1
TABLE OF CONTENTS
Section 1 Table Of Contents--------------------------------------------2
Section 2 Technical Assistance--------------------------------------- 3
Section 3 Warranty---------------------------------------------------------4
Section 4 Description Of Tape Dispenser--------------------------5
Section 5 Safety Issues---------------------------------------------------6
Section 6 Specifications------------------------------------------------- 8
Water Activated Taper Dimensions--------------------------8
Water Activated Taper Components------------------------ 9
Water Activated Taper Specifications---------------------- 12
Section 7 Set Up Procedures-------------------------------------------13
Selecting The Handle Position-------------------------------- 13
Tape Loading------------------------------------------------------- 14
Tape Threading-----------------------------------------------------15
Filling The Water Bottle------------------------------------------16
Removing The Brush Pot--------------------------------------- 16
Removing The Moistening Brush---------------------------- 17
Adjusting The Brush Pot Water Level---------------------- 18
Adjusting The Brush Weight-----------------------------------18
Section 8 Operating Instructions--------------------------------------19
Adjusting The Tape Length-------------------------------------19
Dispensing Tape--------------------------------------------------- 19
Section 8 Troubleshooting----------------------------------------------20
Section 9 Recommended Spare Parts List-------------------------22
Section 10 Preventive Maintenance------------------------------------23
Cleaning The Tape Path----------------------------------------- 23
Cleaning The Brush Pot Assembly-------------------------- 24
Cleaning The Cutter Blade--------------------------------------25
Cutter Blade Maintenance-------------------------------------- 26
Cutter Blade Replacement--------------------------------------27
Section 11 Appendix A-Illustrations And Parts Lists------------ 28
U9800TW UDM 9800
2
REVISION CONTROL
REV00 InitialRelease
REV01 Review Release
REV02 Final Release
U9800TW UDM 9800
3
TECHNICAL ASSISTANCE
Technical Support
This is the Interpack Model TWA 1000-M Manual Water Activated Taper you ordered. It has
been set up and tested in our factory with Intertape manufactured Water Activated tapes. If
any problems occur when setting up or operating this equipment, please contact the
authorized distributor from where you purchased this item.
Should you need to contact Interpack Technical Support, please have the Water Activated
Taper model number and serial number available. This information can be found on the
nameplate of the side panel of the machine. Interpack Technical Support is available during
normal business hours (Eastern Time).
PHONE 813-621-8410 x101
If you have a technical question that does not require an immediate response, you may
contact Interpack by fax.
FAX 813-621-8449
Replacement Parts
Order parts by item number, part name and quantity required. Replacement parts are
available from your Authorized Interpack Distributor exclusively.
Should you require assistance selecting the correct part, you may call:
Intertape Polymer Group
Interpack Machinery
9940 Currie Davis Drive, Suite 23B
Tampa, FL, 33619
Tel: 1-800-474-8273 Option 3
Fax: 1-800-462-1293
MODEL:
SERIAL NUMBER:
DISTRIBUTOR PURCHASED FROM:
DATE OF PURCHASE:
U9800TW UDM 9800
4
U9800TW UDM 9800
5
WARRANTY
EQUIPMENT WARRANTY AND LIMITED REMEDY: The following warranty is made in lieu of all other
warranties, express or implied, including, but not limited to, the implied warranty of merchantability, the
implied warranty of fitness for a particular purpose, and any implied warranty arising out of a course of
dealing, a custom or usage of trade:
Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following warranties:
1. The HSD2000 Tape Heads' knife blades, springs and wipe down rollers will be free from all
defects for a period of ninety (90) days.
2. All other HSD2000 Tape Head parts will be free from all defects for one (1) year after delivery.
3. Water Activated Tapers’ blades and brushes will be free from defects for ninety (90) days after
delivery
4. Drive Belts will be free from defects for ninety (90) days after delivery
5. The Gear Motors will be free from defects for one (1) year after delivery.
6. All other components will be free from defects for one (1) year after delivery.
If any part is proven defective within its warranty period, then the exclusive remedy and Intertape's and
the seller's sole obligation shall be, at Intertype’s option, to repair or replace the part, provided the
defective part is returned immediately to Intertape's factory or an authorized service station designated
by Intertape.
A part will be presumed to have become defective after its warranty period unless the part is received or
Intertape is notified of the problem no later than five (5) calendar days after the warranty period.
If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its option,
will replace the equipment or refund the purchase price. Intertape shall have no obligation to install the
repaired or replacement part.
Intertape shall have no obligation to provide or pay for the labor required to install the repaired or
replacement part. Intertape shall have no obligation to repair or replace (1) those parts failing due to:
operator misuse, carelessness, or due to any accidental cause other than equipment failure, or (2) parts
1. Failure or damage is due to misapplication, lack of proper maintenance, abuse,
improper installation or abnormal conditions such as temperature, moisture, dirt or
corrosive matter, etc.
2. Failure due to inadequate cleaning, improper operating environment, improper utilities
or operator error.
3. Failure due to operations above the rated capacities, or in any other improper manner,
either intentional or otherwise.
4. Failure is due to equipment, which has been altered by anyone other than an
authorized representative of Intertape Polymer Group.
5. Failure is due to an attempt by the purchaser to correct alleged defective equipment.
In this event the purchaser is responsible for all expenses incurred.
LIMITATION OF LIABILITY: Intertape and seller shall not be liable for direct, indirect, special, incidental or
consequential damages based upon breach of warranty, breach of contract, negligence, strict liability or
any other legal theory.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be changed only
by written agreement signed by authorized officers of Intertape and seller..
DESCRIPTION OF TWA 1000-M WATER ACTIVATED TAPER
Figure 4-1
The Interpack Family of Water Activated Tapers are designed to dispense pre-determined lengths
of pre-moistened Intertape or Central Brand water activated carton sealing tape. This tape is then
manually applied to the top and bottom center seam of regular slotted corrugated cartons.
This TWA 1000M Manual dispenses tape by engaging a pull handle.
U9800TW UDM 9800
6
SAFETY ISSUES
There is a safety label used on all Interpack Water Activated Tapers. This label is to warn
operators and service personnel of the sharp cutting edge of the blade. Please read the label
and the following safety precautions before using the Water Activated Taper.
Read this manual for other important safety operating and service information.
Only trained personnel are to operate and service Water Activated Taper.
Wear safety glasses.
Unplug electrical power before servicing (Heater Models)
All covers and guards must be in place before operating.
Stay clear of moving parts which can shear and cut.
Note: Should any of the safety labels placed on the Water Activated
Taper be damaged or destroyed, replacements are available.
U9800TW UDM 9800
7
SAFETY ISSUES
The illustrated label shown in
Figure 5-1 is attached next to the
Cutter Blade area. The label warns
operators and service personnel of
the very sharp knife used to cut the
tape at the end of the tape
application.
Figure 5-1
The illustrated label shown in Figure
5-2 is attached to the inside cover of
the water activated taper. The label
provides operators and service
personnel of the proper method of
threading a new roll of tape through
the machine.
More detailed information is provided
in the “Set Up Procedures” portion of
this manual.
Figure 5-2
U9800TW UDM 9800
8
SPECIFICATIONS
Water Activated Taper Dimensions
Figure 6-1
U9800TW UDM 9800
9
SPECIFICATIONS
Water Activated Taper Components
.
Feed Rolle
r
(Shown In Short Length
Roll Position) Tape Roll Carriage
Water Bottle
Hinged Cove
r
Tape
Dispensing
Handle
Tape Length
Scale
Tape Length
Adjustment Knob
Brush Pot
Assembly
Figure 6-2
U9800TW UDM 9800
10
Altri manuali per TWA 1000-M
1
Indice
