Interpack ET xtreme Series Manuale utente
1 R01
ET xtreme ®
Standard LD Tape Head
Serial Numbers UH232T, UH432T
2 R01
3 R01
TABLE OF CONTENTS
Section 1 HHHTUTUTUTable Of ContentsUUUTTTHHH--------------------------------------------- 3
Section 2 HHHTUTUTUTechnical AssistanceUUUTTTHHH----------------------------------------- 4
Section 3 HHHTUTUTUWarrantyUUUTTTHHH--------------------------------------------------------- 5
Section 4 HHHTUTUTUDescription Of Tape HeadUUUTTTHHH---------------------------------- 6
Section 5 HHHTUTUTUSafety IssuesUUUTTTHHH--------------------------------------------------- 7
Section 6 HHHTUTUTUSpecificationsUUUTTTHHH--------------------------------------------------- 10
HHHTUTUTUTape Head DimensionsUUUTTTHHH-------------------------------------- 10
HHHTUTUTUTape Head ComponentsUUUTTTHHH-------------------------------------11
Operating Conditions -----------------------------------------12
HTUTape Head SpecificationsUUUTTTHHH------------------------------------12
HHHTUTUTUInstallation In Other MachineryUUUTTTHHH-----------------------------13
Section 7 HHHTUTUTUSet Up ProceduresUUUTTTHHH-------------------------------------------- 14
Receiving and Handling--------------------------------------14
HHHTUTUTU Mounting AdaptersUUUTTTHHH-------------------------------------------- 15
HHHTUTUTUTape LoadingUUUTTTHHH--------------------------------------------------- 16
HHHTUTUT UTape ThreadingUUUTTTHHH------------------------------------------------ 17
Tape Centering-------------------------------------------------19
HHHTUTUT UTape Leg Length AdjustmentUUUTTTHHH------------------------------ 21
HHHTUTUTU One Way Clutched Roller AdjustmentUUUTTTHHH------------------- 22
HHHTUTUTU Main Spring AdjustmentUUUTTTHHH------------------------------------- 22
HHHSection 8 HHHTUTUTUTroubleshootingUUUTTTHHH------------------------------------------------ 25
Section 9 HHHTUTUTURecommended Spare Parts ListUUUTTTHHH--------------------------- 28
Section 10 HHHTUTUTUPreventive MaintenanceUUUTTTHHH------------------------------------- 30
HHHTUTUTUKnife Blade ReplacementUUUTTTHHH----------------------------------- 30
HHHTUTUTUOiler Pad LubricationUUUTTTHHH----------------------------------------- 31
HHHTUTUTUUrethane Tacking Roller ReplacementUUUTTTHHH------------------ 32 HHHTUTUTU
Spring ReplacementsUUUTTTHHH---------------------------------------- 33
HHHTUTUTUWipe Down Brush ReplacementUUUTTTHHH-------------------------- 40
HHHTUTUTU Schedule Of Preventive MaintenanceUUUTTTHHH------------------- 41
Section 11 HHHTUTUTUAppendix A-Illustrations And Parts ListsUUUTTTHHH---------------- 42
HHH
4 R01
TECHNICAL ASSISTANCE
Technical Support
This is the Interpack Model ET xtreme®Series Tape Head you ordered. It has been set up and
tested in our factory with Intertape brand tapes. If any problems occur when setting up or
operating this equipment, please contact the authorized distributor from where you purchased
this item.
If contact with the authorized distributor is not possible, Interpack Technical Support is
available. Should you need to contact Interpack Technical Support, please have the Tape
Head’s model number and serial number on hand. This information can be found on the
label affixed to the Cover Frame of the Tape Head. Interpack Technical Support is available
during normal business hours 8:30 a.m. to 5:00 p.m. (Eastern Time).
Tel: 1-800-474-8273 Option 3
If you have a technical question that does not require an immediate response, you may
contact Interpack by fax.
Fax: 1-800-462-1293
Technical support may also be contacted via email at the address below:
Email: machsupp@itape.com
Replacement Parts
Order parts by part number, item description and quantity required. Replacement parts are
available from your Authorized Interpack Distributor exclusively.
Should you require assistance selecting the correct part, you may call:
Intertape Polymer Group
Interpack Machinery
Tel: 1-800-474-8273 Option 3
Fax: 1-800-462-1293
MODEL:
SERIAL NUMBER:
DISTRIBUTOR PURCHASED FROM:
DATE OF PURCHASE:
5 R01
WARRANTY
EQUIPMENT WARRANTY AND LIMITED REMEDY: The following warranty is made in lieu of all other
warranties, express or implied, including, but not limited to, the implied warranty of
merchantability, the implied warranty of fitness for a particular purpose, and any implied
warranty arising out of a course of dealing, a custom or usage of trade:
Intertape sells its Interpack Tape Heads, Case Tapers and Case Erectors with the following
warranties:
1. The ET xtreme® Tape Heads' blades, springs and tacking rollers will be free from all defects for a
period of ninety (90) days.
2. All other ET xtreme® Tape Head parts will be free from all defects for one (1) year after delivery.
3. Water Activated Tapers’ blades and brushes will be free from defects for ninety (90) days after
delivery.
4. Drive Belts will be free from defects for ninety (90) days after delivery.
5. The Gear Motors will be free from defects for one (1) year after delivery.
6. All other components will be free from defects for one (1) year after delivery.
If any part is proven defective within its warranty period, then the exclusive remedy and
Intertape's and the seller's sole obligation shall be, at Intertype’s option, to repair or replace
the part, provided the defective part is returned immediately to Intertape's factory or an
authorized service station designated by Intertape.
A part will be presumed to have become defective after its warranty period unless the part is
received or Intertape is notified of the problem no later than five (5) calendar days after the
warranty period.
If Intertape is unable to repair or replace the part within a reasonable time, then Intertape, at its
option, will replace the equipment or refund the purchase price. Intertape shall have no
obligation to install the repaired or replacement part.
Intertape shall have no obligation to provide or pay for the labor required to install the repaired
or replacement part. Intertape shall have no obligation to repair or replace (1) those parts
failing due to: operator misuse, carelessness, or due to any accidental cause other than
equipment failure, or (2) parts.
1. Failure or damage is due to misapplication, lack of proper maintenance, abuse, improper
installation or abnormal conditions such as temperature, moisture, dirt or corrosive matter,
etc.
2. Failure due to inadequate cleaning, improper operating environment, improper utilities or
operator error.
3. Failure due to operations above the rated capacities, or in any other improper manner,
either intentional or otherwise.
4. Failure is due to equipment, which has been altered by anyone other than an authorized
representative of Intertape Polymer Group.
5. Failure is due to an attempt by the purchaser to correct alleged defective equipment. In
this event the purchaser is responsible for all expenses incurred.
LIMITATION OF LIABILITY: Intertape and seller shall not be liable for direct, indirect, special,
incidental or consequential damages based upon breach of warranty, breach of contract,
negligence, strict liability or any other legal theory.
The foregoing Equipment Warranty and Limited Remedy and Limitation of Liability may be
changed only by written agreement signed by authorized officers of Intertape and seller.
6 R01
DESCRIPTION OF TAPE HEAD
Figure 4-1
The Intertape ET xtreme® Family of Tape Heads are designed to apply Intertape brand pressure
sensitive carton sealing tape to the top and bottom center seam of regular slotted corrugated
cartons.
The ET xtreme® LD tape heads were conceived to adapt to Loveshaw Little David case sealers.
There is no warranty however, expressed or implied that they will fit all LD machines out in
circulation.
7 R01
SAFETY ISSUES
There is a safety label used on all Interpack Tape Heads. This label is placed on the Tape Head
knife guard to warn operators and service personnel of the sharp cutting edge of the blade.
Please read the label and the following safety precautions before using the Tape Head.
✓Read this manual for other important safety operating and service information.
✓Only trained personnel are to operate and service Tape Head.
✓Wear safety glasses.
✓Shut off power to machine before adjusting.
✓Unplug electrical power before servicing.
✓All covers and guards must be in place before operating.
✓Stay clear of moving parts which can shear and cut.
✓Never operate the Tape Heads with the Knife Guard removed.
✓Turn electrical supply off before servicing the Tape Heads, including tape loading
and threading.
Note: Should any of the safety labels placed on the Tape Head be damaged
or destroyed, replacements are available.
8 R01
SAFETY ISSUES
The illustrated label shown in Figure 5-1 is
attached to the Knife Guard. The label
warns operators and service personnel of
the very sharp blade. The guard shall only
be removed when the torsion spring or the
guard itself are being replaced.
Should the tape head be operated without
blade guard, user voids all warranty
implied, the manufacturer bears no
responsibility for the consequences.
Tape head shall never be serviced while
mounted in a machine.
Figure 5-1
Label on Figure 5-2 is visible on carton
sealing machine.
Figure 5-2
While the tape head is processing cartons,
or it is in motion, keep your hands away
(Figure 5-3).
Figure 5-3
9 R01
SAFETY ISSUES
The illustrated label shown in Figure 5-4 is attached to the operator side plate of each tape
head. The label provides operators and service personnel the proper method of threading a
new roll of tape through the tape head.
More detailed information is provided in the “Set Up Procedures” portion of this manual.
Turn air and electrical supplies off before servicing the tape heads.
Figure 5-4
10 R01
SPECIFICATIONS
UUUTape Head Dimensions
Figure 6-1
Altri manuali per ET xtreme Series
1
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Interpack Registratore a cassette
