2
This guide is for the use with the Auto focus IP Block Camera using firmware version 1.1.7
or above
The User’s Manual provides functionality and instructions for the ,3FDPHUDs which include the
10[/[/33[based designed product series.
Before Using the IP Block Camera
Check the PC requirements & review the O.S. platform requirement for remote access
IP block camera products
Having basic knowledge of network setup and configuration will be helpful
Read following important precautionary information
1. &ompatible with software or any 3rd party management software
which fully integrate with API, check the software compatibility in advance if
you desire to use RWKHU software for work.
2. Do not shoot images that are extremely bright (e.g. strong light sources, the sun, etc.) for
long periods of time. Do not use or store the camera in temperature/humidity out of
storage specification. Do not close to generators of powerful electromagnetic radiation
such as radio or TV transmitters. Do not expose where it is subject to fluorescent light
reflections and where it is subject to unstable (flickering, etc.) lighting conditions. Do not
locate where it is subject to strong vibration and where it is subject to radiation from laser
beams.
3. Keep dust & dirt free on surface of lens to guarantee optimized image quality output.
4. Do not apply excessive voltage. (Use only the specified voltage.) Otherwise,
hardware may get any unrecoverable damage.
5. As CMOS image sensors use shutters that capture images line-by-line, there is a slight
time difference between the top and bottom of an image. As a result, images may appear
skewed if the camera is moved. (Commonly called Rolling Shutter)
