Intex 98CT Manuale utente

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 1

INTEX® OWNER’S MANUAL

INFLATABLE BOAT

IMPORTANT

THIS BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

READ IT THOROUGHLY BEFORE USING THIS PRODUCT AND

KEEP IT FOR FUTURE REFERENCE.

098-*CT-R0-1612

Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous

licence de/Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen

Ländern der Welt in Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O

Box 28829, Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European

Union by/Distribué dans l’Union Européenne par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union

durch/Intex Trading B.V., Venneveld 9, 4705 RR Roosendaal – The Netherlands

www.intexcorp.com

IMPORTANT!

DO NOT RETURN PRODUCT TO STORE

To purchase parts and accessories or to obtain non-technical assistance, Visit

www.intexcorp.com

For technical assistance and missing parts call us toll-free (for U.S. and Canadian Residents):

1-800-234-6839

Monday through Friday, 8:30am to 5:00pm Pacific Time

Your satisfaction with your Intex boat is very important to us and we would greatly appreciate your feedback.

Please visit www.intexcorp.com and click on “Boat Satisfaction Survey” to leave a quick feedback - thank you.

Due to a policy of continuous product improvement, Intex reserves the right to change specifications and appearance,

which may result in updates to the instruction manual without notice.

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 2

TABLE OF CONTENTS

INTRODUCTION.............................................................................................................................3

MANUFACTURE’S CERTIFICATION..............................................................................................3

WARNING.......................................................................................................................................3

DESCRIPTION.............................................................................................................................4-6

INFLATING INSTRUCTIONS..........................................................................................................7

HOW TO USE BOSTON VALVE.....................................................................................................7

FISHING ROD HOLDER USE........................................................................................................8

SEAT INSTALLATION.....................................................................................................................8

OAR ASSEMBLY........................................................................................................................8-9

GRAB LINE INSTALLATION.........................................................................................................10

ACCESSORY LINE INSTALLATION.............................................................................................10

SAFETY AND OPERATION INSTRUCTIONS.........................................................................10-11

CARE AND MAINTENANCE.........................................................................................................11

DISASSEMBLY AND STORAGE...................................................................................................12

TROUBLESHOOTING..................................................................................................................12

REPAIRS.......................................................................................................................................12

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 3

Introduction

This manual has been compiled to help you to operate your craft with safety and pleasure.

It contains details of the craft, the equipment supplied or fitted, its systems, and information on its

operation and maintenance. Please read it carefully, and familiarize yourself with the craft before

using it.

If this is your first craft, or you are changing to a type of craft you are not familiar with, for your own

comfort and safety, please ensure that you obtain handling and operating experience before

assuming command of the craft. Your dealer or national sailing federation or yacht club will be

pleased to advise you of local sea school, or competent instructors.

PLEASE KEEP THIS MANUAL IN A SECURE PLACE, AND HAND IT OVER TO THE NEW OWNER

WHEN YOU SELL THE CRAFT. RECORD THE "HULL IDENTIFICATION NUMBER" (HIN) WHICH

IS PRINTED ON THE BOAT'S HULL IN THE FOLLOWING BOX:

HIN: ________________________

Manufacture’s Certification

For boats between and including 2.5 and 24 meters hull length, a CE (FOR EUROPE ONLY) mark

means that the boat complies with European Directives for Recreational Craft 94/25/EC and

2003/44/EC as published by the International Organization for Standardization, ISO 6185.

NMMA (FOR USA ONLY) certification means that the boat, sold in the United States, has been

judged by the National Marine Manufacture’s Association to be in compliance with the U.S. Coast

Guard Regulations and American Boat and Yacht Council (ABYC) standards and recommended

practices.

• This is not a life saving device. Use only under competent supervision. Never allow diving into

this product. Never leave in or near the water when not in use. Never tow from any vehicle.

• Read the complete Owner’s Manual before use and store this Manual in a safe place for future

reference.

• Follow all the Safety and Operating Instructions on this Manual.

• Never navigate alone. Beware of offshore winds and currents.

• Do not exceed the maximum recommended capacities. Overloading violates regulations.

• Everyone on board must wear a Personal Floatation Device (PFD).

• Use caution when stepping or climbing aboard the boat. Step into the center of the boat for

maximum stability.

• Distribute the weight of passengers, gear, tackle box, and accessories so that the boat sits level

fore (front) to aft (back) and side-to-side.

• Do not use your boat if you suspect a puncture or leak.

• Adults should inflate the chambers in numbered sequence.

•Not for white water rafting or any other extreme sports activities.

• Follow these rules to avoid drowning, paralysis or other serious injuries.

WARNING

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 4

" " - Recommended seating arrangement of the occupants.

Description

Challenger Series

" " - Recommended seating arrangement of the occupants.

Seahawk 2 Seahawk 3

Seahawk Series

Seahawk

Challenger 3a

1810246 11

Challenger 4a

110

4511

2456911 35

72946 11

Seahawk 4

1972845 1110

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 5

Excursion Series

" " - Recommended seating arrangement of the occupants.

Mariner 3

" " - Recommended seating arrangement of the occupants.

5710

Excursion 4 Excursion 5

Excursion 2 Excursion 3

1426791053 111426791053 11

1426791053 111427691053 11

12 13

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 6

" " - Recommended seating arrangement of the occupants.

Mariner 4

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

Grab handle

All around grab line

Seat or seat cushion

Inflatable floor or removable slats floor

Oar lock

Oar holder

Gear pouch or accessory bag

Inflation valve / Keel valve

Fishing rod holder

Motor mount

Boston valve

Rock guard

Inflatable keel

Descriptions

3457

12 13

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 7

Inflating Instructions

Before starting, locate a clean area free of stones or other sharp objects. Unroll the boat so it is laid

out flat, and locate your pump.

Use a hand or foot operated air pump to inflate the boat. Do not use high-pressure air compressors.

Adults should inflate the chambers following the numerical sequence marked on the valves. It is very

important to follow the numerical sequence; failure to do so will result in an improperly inflated boat.

Fill each chamber until it is stiff to the touch but NOT hard. Use the enclosed ruler to check the main

chamber for proper inflation. DO NOT OVER INFLATE. Fill with cold air only.

IMPORTANT: Air temperature and weather condition do affect the internal air pressure of inflatable

products. In cold weather the product will lose some pressure due to the fact that the air will contract.

If this occurs, you may want to add a little air to the product. However, in hot weather, the air will

expand. You must let some air out to prevent the product from failing due to overpressure.

How to Use Boston Valve:

1. Double valve cap (valve lets air in, not out).

2. Quick deflation cap.

3. Unscrew Double valve cap.

4. Insert output end of air pump into valve and fill. Do not over inflate or use high pressure

compressor.

5. To deflate: unscrew quick-deflation cap. CAUTION: Double valve does not operate when this cap

is off. Do not unscrew this cap while boat or inflatable is in water.

Challenger series / Seahawk series / Excursion series:

Mariner 3 / Mariner 4:

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 8

Fishing Rod Holder Use (Certain Models):

1. Slide the end cap over the end of the fishing rod.

2. Insert the fishing pole into the holder.

Seat Installation:

Certain Models:

1. Inflate each seat cushion slowly to about 75% of its capacity.

2. Attach the seat cushion hinge to the hinge on the boat. Repeat the

connection on the other side and for all seats. See Fig A.

3. Finish inflating the seat cushions slowly until it is firm to the touch

but NOT hard. DO NOT OVER INFLATE!

4. To disassemble the seats, deflate the seats first and reverse the

installation procedures.

NOTE: Some seat cushions after inflation are tuck in directly into

the fore, mid or aft locations of the boat cockpit. No hinges.

Mariner 3 / Mariner 4:

Inflate each seat cushion slowly to about 75% of its capacity.

Put the seat cushions into the fore, mid or aft locations of the boat cockpit.

Finish inflating the seat cushions slowly until it is firm to the touch but NOT hard. DO NOT OVER INFLATE!

Seat cushions after inflation are tuck in directly into the fore, mid or aft locations of the boat cockpit.

To disassemble the seats, deflate the seats first and reverse the installation procedures.

Fig A

Oar Assembly:

Insert “Shaft A” with the pin end first into the blade. Make sure the pin is securely fastened to the blade.

Insert the assembled “Shaft A” through the oar-lock with the blade towards outboard (water).

Place the retainer ring onto the other end of the assembled “Shaft A”, from inside of the boat.

Join “Shaft A” with “Shaft B” together by inserting them together into the coupler and tighten the

coupler covers securely.

When the oars are not in use secure the oars onto the oar holders located on each side of the boat.

Fishing

Rod

Holder

End Cap

Fishing

Rod

Coupler Cover

Shaft B

Coupler

Shaft A

Blade

Retainer Ring

Coupler Cover

Shaft

Coupler

Blade

Retainer Ring

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 9

For boats with rotation oar-lock:

10733

10734 Shaft B

Shaft A

Coupler Cover

Coupler

Retainer Ring

Blade

FRENCH OARS:

98CT

(98CT) "NMMA" BOAT W / MOTOR MOUNTING (TYPE II) ENGLISH 7.5”X10.3” 12/10/2015

SAVE THESE INSTRUCTIONS

Page 10

Figure eight knot

Accessory Line Installation (Certain

Models):

Your boat may have accessory lines to install. Tie a

figure eight knot into one end of the accessory line

and slide it through the rope holders. Tie a figure

eight knot in the remaining end of the rope.

The accessory bags may or may not be attached

to the accessory lines. Slide the rope through the

accessory bags while installing the accessory lines, if

desired.

Safety and Operating Instructions

Before Departing from the Shore or Dock

Know all required information and inform your passengers:

•Take a boating safety course and get hands-on training from your boat dealer or local boating

authorities.

•Know all local regulations and hazards related to water activities and boat operation.

•Check weather forecast, local currents, tides and wind conditions.

•Advise someone on land of the time you plan to be back at your starting point.

•Explain basic boat operation to all passengers.

•Children and non-swimmers need special instructions in the use of life jacket or personal floatation

devices (PFD).

•Be sure that one of your passengers can operate the boat in case of emergency.

•Learn how to determine the distance you can cover, and remember that bad weather conditions

can alter this.

•Review all safety requirements regularly.

Check the working condition of the boat and equipments:

•Check inflation pressure.

•Inspect the valves caps.

•Check the load is evenly distributed, fore (front) to aft (back) and side-to-side.

Make sure that all required safety equipment is on board (check the laws and regulations of the

country or locality in which you are boating to see if additional equipment may be needed):

•One personal flotation device (PFD) per person.

•Air pump, oars, repair kit and tool kit.

•Any other mandatory equipment.

•The boat papers and your boating license (if applicable).

•Lights are required if operating after dark.

Square knot

Grab Line Installation (Certain Models):

IMPORTANT: To properly install the inflatable boat’s grab line

and/or accessory lines, first inflate the boat.

If is necessary, begin the grab line installation at the rear of the

boat by threading it through the rope holders completely around

the outside of the boat. Tie the two loose ends in a square knot

at the rear end of the boat.

Indice

Manuali Barca popolari di altre marche

Raymarine

Raymarine ST70 Instrument Manuale utente

Pro-Line Boats

Pro-Line Boats Pro Line 19 Sport Manuale utente

Jeanneau

Jeanneau CAP CAMARAT 8.5 CC Manuale utente

Tiara Yachts

Tiara Yachts C49 2024 Manuale utente

Monterey Boats

Monterey Boats Sport Yacht 330 Manuale utente

J 105 Manuale utente

PURSUIT

PURSUIT OS 335 Manuale utente

Boston Whaler

Boston Whaler CONQUEST 345 Manuale utente

Jeanneau

Jeanneau SUN ODYSSEY 41 DS Manuale utente

Meridian

Meridian 490 Pilothouse Manuale utente

Advanced Elements

Advanced Elements AdvancedFrame Expedition AE1009 Manuale utente

Robo Marine Indonesia

Robo Marine Indonesia GEOMAR Manuale utente

Swallow Boats

Swallow Boats BayRaider Manuale utente

X SHORE

X SHORE EELEX 8000 Manuale utente

ISLAND PACKET

ISLAND PACKET 370 Manuale utente

Sea Ray

Sea Ray 175 Sport Manuale utente

Regal

Regal 2300 Manuale utente

Grand

Grand Silver Line S250 Manuale utente