IV. Functions and programming
Automatic mode
With turning on the power starts the backwash time T1.
Periodically turns the backwash magnets on and off for different, recurring periods
of time (Repeatedly repeated delay cycle). The time delay cycle starts when the supply
voltage Uis applied to the controller. Washing is performed for the programmed time T1
and terminated for the programmed time T2.
Automatic mode programming:
Press and hold for more than 5 seconds. "Prog / Enter" button - "Prog"
indicator flashes and two continuous beeps are heard;
Press the "Set" button to select letter A;
Press the "Prog "button to confirm the mode. On the "Prog" indicator the
symbol for T1 flushing time;
Press the "Prog "button to confirm. On the "Prog" indicator the time range
symbol flashes;
Press the "Set" button until you select the desired range:
І І –sec.; І - minutes; h –hours
Press the "Prog "button to enter the selected range. On the "Time"
indicator the first digit flashes;
Press the "Set" button until the desired value is 0 - 9;
Press the "Prog "button to enter the selected value. The second digit
flashes on the "Time" indicator;
Press the "Set" button until the desired value is 0 - 9;
• Press the "Prog "button to enter the selected value. On the "Prog"
indicator the symbol for time off T2 starts flashing;
• Press the "Prog "button to confirm. On the "Prog" indicator the time
range symbol flashes;
Press the "Set" button until you select the desired range:
І І –sec.; І - minutes; h –hours
Press the "Prog "button to enter the selected range. On the "Time"
indicator the first digit flashes;
Press the "Set" button until the desired value is 0 - 9;
Press the "Prog "button to enter the selected value. The second digit
flashes on the "Time" indicator
Press the "Set" button until the desired value is 0 - 9;
