INTU Evolution X3 Manuale utente
1
User Manual
PERFORMANCE ON DEMAND
X3
2
Dear Customer,
Thank you for purchasing our air purier. In order to facilitate the installation and use of
this machine, we recommend that you carefully read this manual, and keep it stored safely.
To ensure that you always enjoy fresh air, use this manual for qualied and standardized
installation, proper use, and maintenance. This will ensure you always enjoy fresh air.
If any questions arise from use, please consult this manual. If it is in accordance with the
warranty, we kindly welcome you to contact us with the address and phone number on the
card. We welcome any comments or suggestions you have about our product and service.
3
Contents
Performance Index ......................................................................................................................... 04
Product Features .............................................................................................................................05
Product Appearance and Structure .............................................................................................. 06
Installing the Filter ............................................................................................................................07
Filter / Dust Sensor Maintenance ................................................................................................... 08
Function Description ....................................................................................................................... 09
Precautions .......................................................................................................................................10
Prohibited ...........................................................................................................................................11
Mandatory ......................................................................................................................................... 12
Packaged Items ................................................................................................................................ 13
WIFI .................................................................................................................................................... 14
Troubleshooting ...............................................................................................................................16
4
Product Name Air Purier
Rated Voltage 220V-240V~
Rated Frequency 50Hz/60Hz
Rated Power 43W
Particulates (CADR) 200m3/h
Particulates CCM P1
Energy Eciency Index Qualied (Particulates)
Noise 57dB(A)
Applicable area 14-24 m2
Product size 325x172x510mm
Weight 5kg
Product Usage Removes pollutants such as particulate
matter, gas pollutants and microorganisms in
the air.
Method of Cleaning 1.Washable pre-lter
2.Composite activated carbon lter
+ HEPA lter
Performance Index
5
Pre-lter
The primary lter is the primary lter of the air purier. It is mainly used to lter dust particles
above 5 microns, including large particles of dust, dander, pollen, oating matter and other
pollutants. Can be cleaned and reused multiple times.
HEPA+ activated carbon composite lter
The activated carbon lter is based on the standard of lter material for household purier
ltration. The loose polymer material is used as the carrier, and the high-eciency catalyst is
attached to the surface of the activated carbon to make the adsorption capacity strong, the
wind resistance is small, and the lter function is good. With high-quality powdered activated
carbon as adsorbent material, it has good adsorption and dust collecting eect, good
formability, high strength and low airow resistance. Activated carbon can absorb harmful
gases such as benzene, toluene, xylene, formaldehyde and ammonia, harmful gas with good
adsorption function .
The HEPA lter lters 0.3 micron particles of bacteria, smoke and dust in the air, and the
ltration eciency is over 99%. Combined with a multi-purpose lter, the HEPA lter lters out
tiny particles larger than 20 nanometers in diameter.
Product Features
6
Product Appearance
and Structure
Sensor
Air Inlet
Air outlet
Operation Panel
Handles
(on both sides)
Surface cover
7
Installing the Filter
Note: Make sure to remove the plastic bag from the
lter before use.
1. Press the “PUSH” on both sides of the air inlet
and open.
2. Remove the lter.
3. Remove the lter from the plastic bag.
Note: There are internal and external points, the one with the pull tab facing out; be sure to
install the front panel before use.
8
Filter / Dust Sensor Maintenance
Pre-lter (about half a month)
Use a vacuum cleaner to remove dust from the surface of the lter,
or wash it with water and dry it thoroughly.
HEPA+ activated carbon composite lter
(about once every two months)
When the 1500 hour lter replacement prompt ashes, press and
hold the reset button to clear the lter indicator light and reset the
timing function.
Place the lter in a ventilated place so that the harmful gases
and bacteria on the surface of the lter can be volatilized. Do not
expose it to excessive sunlight.
Do not wash the lter with water.
Tips
• Unplug the power plug before cleaning and maintenance;
• Do not operate with the lter removed (no dust removal eect, and the dust that is
inhaled may cause equipment failure);
• Unplug the power cord when it is idle for a long time (it will also consume power in the
standby state);
• Depending on the place of use and the method of use (for example, households with a
large number of smokers or areas with severe air pollution), the lter replacement cycle
may be shortened. If the ltration eect is not obvious, replace the lter in time.
When replacing the lter, please turn o the power rst.
9
Function Description
After the power is turned on, the air quality indicator light is completely
red, the machine enters the automatic mode.
After plugging in the power, you will hear a sound “Di”, the machine
enters standby mode, and the air quality indicator will shows red color.
Power
Timer
Speed
Child Lock
Reset
Power O
Powering On
The machine’s working time can be set by the timer button while the
machine is running. Set the time to 1 hour, 2 hours, 4 hours, 8 hours,
press again to turn o, the corresponding indicator lights after the
selected time.
Press the wind speed button to change the speed of the motor. It is
divided into rst gear, second gear, third gear, sleep, AUTO. When
pressed, the machine increases one gear from the current gear position,
and then returns to the automatic mode.
In AUTO mode, PM2.5 corresponds to the corresponding table of air
quality and gear position in the intelligent mode of speed:
1~100 = green light = excellent air quality = rst gear
101~200 = yellow light = good air quality = second gear
201~500 = red light = poor air quality = third gear
When the child lock button is pressed, the button function of the
machine enters the locked state, and all the buttons cannot be operated.
Long Press this button for 3 seconds to unlock.
This unit is equipped with a timing change lter function, which will ash
until the 1500 hour lter replacement prompt. Press and hold the reset
button for 5 seconds to clear the lter indicator and reset the timing
function.
When the power is on, touch the “Power” button on the operation, and
the machine enters the standby state. (The icon light is on when the
machine enters the standby state.)
10
During Installation
1. Do not place in the following places:
• Direct sunlight or facing the air outlet and heated places (may
cause deformation,Deterioration, discoloration, and failure).
• Equipment accessories such as TVs and radios (which may
cause image distortion and noise). Please place it at a
distance of 1m or more. At the same time, if the same socket
is used with these devices, image plugging and noise may
occur when the power plug is inserted. When this happens,
plug the power cord into a dierent outlet.
2. For indoor dust such as pollen, the product should be placed on
the ground.Since pollen, dust, etc. are likely to fall near the oor,
it is recommended to place the product on a at oor in the
room.
3. In order to eectively circulate the air in the room. In order not
to block the air inlet and outlet, place the product about 30cm or
more from the left and right sides of the wall, furniture, curtains,
etc. In order to use this product more eectively, please keep the
back of the product at least 20cm away from the wall.
4. Do not place objects on the main unit (otherwise it may cause the
machine to malfunction). Special Note: Do not place magnets and
metal objects.
5. Do not block the air inlet and outlet, for example, do not place
objects on the air outlet.Or in front of the air inlet.
Precautions
Sun
1m
goods
outlet
inlet
Indice
Altri manuali INTU Evolution Purificatore d'aria
