Invicta Onsen Manuale utente

PAGE2

INVICTA ONSENINSTALLATIONANDUSERMANUAL

1. TECHNICAL DATA

WEIGHT AND DIMENSIONS:

Dimensions Firebox W500 x H1048 x D518mm

Firebox weight 126kg

Flue kit Standard 6”/8”/10”

DETERMINED UNDER TEST CONDITIONS:

Nominal thermal output 6kW

Efficiency (Australian Test) 61%

Emissions (Australian Test) 0.6g/kg

6 / 8” FLUE

500

1048

385

309

PAGE3

INVICTA ONSENINSTALLATIONANDUSERMANUAL

2. PRE-INSTALLATION

Congratulations on your purchase of the Onsen. This appliance should be installed and checked by a qualified

professional. Ensure you have read the operation guidelines thoroughly prior to first use. For any questions or

concerns please contact Oblica on 03 9416 0400.

The installation process is outlined below:

– Determine position of firebox and flue carefully observing the clearances described within this section

– Install the external flue

– Install the internal flue and engage the firebox

– Ensure the floor has adequate protection

CAUTION:

Using components or parts other than those provided by the manufacturer or modifying the specification of

components may result in inferior or unsafe operation. If such action is necessary, consult the manufacturer in the

first instance.

WARNING:

• The appliance and flue-system must be installed in accordance with AS/NZS 2918 and the

relevant building code or codes.

• Any modification of the appliance that has not been approved in writing by the testing authority

will be in breach of the approval granted for compliance with AS/NZS 4013.

• Once the flue has been installed and approved by a professional installer, the flue must not be

modified in any way.

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE4

INVICTA ONSENINSTALLATIONANDUSERMANUAL

MINIMUM CLEARANCE – INTERNAL

2.1 Clearance from non-combustible surfaces

(eg masonry)

100mm minimum clearance is required from fully

non-combustible surfaces.

100

Non Combustible

Glass (frameless or aluminium frame)

350mm

Combustible

550mm

1150mm

Combustible

850mm

2.2 Clearance from glass

350mm minimum clearance is required from normal

non-combustible glass.

2.3 Clearance from combustible surfaces

(eg timber joist & concrete)

Clearances may be reduced with the application of

heat shielding to walls in accordance to the

Australian Building Code.

For information on heat shielding please contact our

office on 03 9416 0400 or email [email protected].

IMPORTANT:

Frames must also be considered. Timber window

frames must be treated as combustible surfaces

(see 2.3). Aluminium frames can be treated as

non-combustible surfaces (see 2.2).

2. PRE-INSTALLATION (CONTINUED)

100

Non Combustible

Glass (frameless or aluminium frame)

350mm

Combustible

550mm

1150mm

Combustible

850mm

100

Non Combustible

Glass (frameless or aluminium frame)

350mm

Combustible

550mm

1150mm

Combustible

850mm

100

Non Combustible

Glass (frameless or aluminium frame)

350mm

Combustible

550mm

1150mm

Combustible

850mm

Configuration 1 – Parallel installation

Configuration 2 – Corner installation

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE5

INVICTA ONSENINSTALLATIONANDUSERMANUAL

MINIMUM CLEARANCE – INTERNAL

2.4 Timber stud wall lined with 30mm

silicate board

Silicate board 30mm thick and installed directly on

combustible wall. The sheet must be fixed with the

2000mm length fixed centrally behind the appliance

and must extend to a height of 1200mm above

the hearth.

2. PRE-INSTALLATION (CONTINUED)

Combustible

2000mm

200mm

Configuration 3 – With Silicate board 30mm thick

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE6

INVICTA ONSENINSTALLATIONANDUSERMANUAL

3. INSTALLATION

3.1 Typical flue kit installation

Cowl (Chinaman Hat)

8” Outer Case

10” Outer Case

8” Outer Case

10” Outer Case

6” Active Flue

CEILING RING

RUBBER

DEKTITE FLASHING

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE7

INVICTA ONSENINSTALLATIONANDUSERMANUAL

3. INSTALLATION (CONTINUED)

3.2 Installing the external flue

1. Place the connection piece inside the suspension bracket. This will join the single skin flue below the

bracket and the triple skin flue above the bracket which have different diameters.

2. Ensure the triple skin flue is installed as per Australian standards (see diagrams below).

The top of the flue must be 400mm higher than the highest point of the roof. Alternatively, there must be a

minimum distance of 3 meters from any higher section of roof.

> 40 cm

–>40 cm

–> 40 cm

–

> 8 m

–

> 120 cm

–

> 8 m

–

> 120 cm

–

> 120 cm

–

> 40 cm

–> 40 cm

–

> 8 m

–

> 120 cm

–

> 8 m

–

> 120 cm

–

> 120 cm

–

The top of the flue must be 1200mm above the roofline. Alternatively, there must be a minimum distance of

3 meters from any higher section of roof.

PITCHED ROOF INSTALLATION

FLAT ROOF INSTALLATION (LESS THAN 5˚ PITCH)

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE8

INVICTA ONSENINSTALLATIONANDUSERMANUAL

3.3 Protecting the floor

• Any combustible floor beneath a fireplace must have a floor protector that extends minimum 300mm at the front.

• If installed directly on combustible material, the floor protector must be made of a minimum 6mm thick cement sheet.

Non-combustible finishes can be applied to the floor protector (tiles, steel sheet, light concrete, etc).

• If the combustible floor is installed on concrete, you can replace the combustible material with non-combustible

material laid directly onto the concrete.

200mm

300mm

Combustible floor

(eg: Timber)

Floor protector

200mm

825mm

705mm

Joist

Insulative board (8mm)

+ non combustible finish

Non combustible finish

(eg.tiles)

Concrete

Combustible

floor (eg. timber)

Joist

Insulative board (8mm)

+ non combustible finish

Combustible

floor (eg. timber)

Combustible

floor (eg. timber)

FLOOR PROTECTOR LAID ON TIMBER FLOOR

3. INSTALLATION (CONTINUED)

200mm

300mm

Combustible floor

(eg: Timber)

Floor protector

200mm

825mm

705mm

Joist

Insulative board (8mm)

+ non combustible finish Non combustible finish

(eg.tiles)

Concrete

Combustible

floor (eg. timber)

Joist

Insulative board (8mm)

+ non combustible finish

Combustible

floor (eg. timber)

Combustible

floor (eg. timber)

FLOOR PROTECTOR LAID ON JOIST

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE9

INVICTA ONSENINSTALLATIONANDUSERMANUAL

200mm

300mm

Combustible floor

(eg: Timber)

Floor protector

200mm

825mm

705mm

Joist

Insulative board (8mm)

+ non combustible finish

Non combustible finish

(eg.tiles)

Concrete

Combustible

floor (eg. timber)

Joist

Insulative board (8mm)

+ non combustible finish

Combustible

floor (eg. timber)

Combustible

floor (eg. timber)

200mm

300mm

Combustible floor

(eg: Timber)

Floor protector

200mm

825mm

705mm

Joist

Insulative board (8mm)

+ non combustible finish Non combustible finish

(eg.tiles)

Concrete

Combustible

floor (eg. timber)

Joist

Insulative board (8mm)

+ non combustible finish

Combustible

floor (eg. timber)

Combustible

floor (eg. timber)

FLOOR PROTECTOR LAID ON CONCRETE

3. INSTALLATION (CONTINUED)

TOP VIEW

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE10

INVICTA ONSENINSTALLATIONANDUSERMANUAL

4. OPERATION

4.1 What you should burn

• Untreated, air dried hardwood

• Split logs with a humidity content of less than 20%

4.2 Do not burn

• Trash

• Painted plastic

• Coated or preservative treated wood

• Waste or black coal

• Inflammable liquids

• Fire gels

• Moist wood with a residual humidity content of more than 20% (this may cause soothing of the chimney).

WARNING:

• Do not use flammable liquids or aerosols to start or rekindle the fire.

• Do not use flammable liquids or aerosols in the vicinity of the fireplace when operating.

• Do not store fuel within prescribed installation clearance distances.

• The use of some types of preservative-treated woods as a fuel can be hazardous.

IMPORTANT:

• Misuse may lead to unhealthy and environmentally harmful emissions and will void any warranty or guarantee.

• The maximum load capacity for the Onsen is 10kg of wood.

• Burning only seasoned hardwood helps to protect the environment and lower emissions.

For details of a wood supplier in your area please call our office on 03 9416 0400 or email [email protected].

INVICTA ELTONINSTALLATIONANDUSERMANUAL

PAGE11

INVICTA ONSENINSTALLATIONANDUSERMANUAL

5. TESTING

TEST REPORT NO ASFT18079

TESTING LABORATORY: Australian Solid Fuel Testing

MANUFACTURER: Invicta

MODEL: Onsen fireplace

WORK REQUESTED: Assessment of appliance to AS/NZS 4012:2014

for determination of Power Output and Efficiency

and AS/NZS 4013:2014 for Flue Gas Emission

using hardwood fuel.

ISSUE DATE: 14/09/2018

INVESTIGATING OFFICER: Steve Marland

RESULTS: The appliance particulate emission factor established

in testing is 0.6g/kg of dry wood, within the maximum

specification of 2.5g/kg of dry wood and an average

efficiency of 61%.

CONCLUSION: This appliance does comply with the requirements

of AS/NZS 4013:2014 for the configuration tested.

INVICTA ELTONINSTALLATIONANDUSERMANUAL

Indice

Altri manuali Invicta Camino da interno

Invicta

Invicta 800 Manuale di servizio

Invicta

Invicta pharos Manuale utente

Invicta

Invicta Foyer 700 OPT Istruzioni operative

Invicta

Invicta tipi Manuale utente

Invicta

Invicta 700 ECO Manuale di servizio

Invicta

Invicta ECO 700 Manuale utente

Manuali Camino da interno popolari di altre marche

Brigantia

Brigantia 35-DVRS31N-2 Manuale del proprietario

Nordpeis

Nordpeis Bergen Manuale utente

Superior

Superior BCT2536TMN Manuale utente

Quadra-Fire

Quadra-Fire 5100I-GD-B Manuale utente

Renaissance

Renaissance RUMFORD 1000 Manuale utente

Lacunza

Lacunza IV-800 Manuale utente

Baxi

Baxi 940 Istruzioni per l’uso

Dru

Dru Maestro 60/2 Tall RCH Manuale utente

Diamond Fireglass

Diamond Fireglass SS-O22 Manuale utente

HearthStone

HearthStone Windsor Bay 8830 Manuale di programmazione

Napoleon

Napoleon ASCENT B42 Manuale utente

Enviro

Enviro E33GI Manuale utente

Smeg

Smeg L30 FABE Istruzioni di montaggio

KEDDY

KEDDY K700 Manuale utente

Godin

Godin 3451 Manuale utente

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Manuale utente

Austro Flamm

Austro Flamm Heidi Back 2.0 945048 Manuale utente

Desa

Desa CCFPDFT Manuale operativo