inVue Smart Lock PL501 Manuale utente
1
Smart Lock
Drawer Lock
PL501
2 3
Overview
Review entire instruction guide before starting installation.
Instructions are intended for drawer applications.
Lock Specification
Drawer Lock is designed for wood and metal drawers.
Drawer door thickness can range from 19 mm – 30 mm
(0.75” – 1.18”).
System Components
1. Drawer Lock (PL501)
2. Template (included)
3. Drawer Arm (sold separately)
4. IR2 Key (PK4400)
Tool Requirements
1. Pencil
2. Power Drill and Bit
3. Drill Bit (2.5 mm) and Hole Saw Bit (22 mm)
4. Phillips #1 Screwdriver
Back Housing
PL501
Front Housing
PL501
Drawer Arm
(sold separately)
IR2 Key
PK4400
Template
(included)
4 5
Determine location of lock. Open drawer. Align tem-
plate (inside of drawer) with top edge of drawer.
Note: Illustrations below shows inside view of cabinet.
Using power tools, drill a 22 mm (0.87”) center hole
through drawer. Drill two 2.5 mm (0.1”) holes for anti-
rotation prongs on lock. Caution: Do not drill prong
holes through drawer, only 4 mm depth needed.
1 2
Center Hole
22 mm (0.87”)
Anti-Rotation
Prongs
Anti-Rotation
Prong Holes
2.5 mm (0.1”)
6 7
Attach drawer arm onto back housing and tighten all 3
screws.
3Slide front housing through drawer.
4
8 9
Extend flex cable through pre-drilled hole. Connect
cable to back housing. Store excess cable in drilled
hole or front housing.
5Align front housing and back housing with hole. Tighten
both long screws to connect front and back housing.
6
10 11
Close drawer. Test lock to confirm proper function. Use
IR2 Key to lock/unlock installation (see page 11).
7LOCK OPERATION USING IR2 KEY
Position IR2 Key against lock, push button and wait for “beep”
before removing key. Lock and unlock cabinets several times to
ensure proper operation.
IR2 Key must be
charged and activated.
See IR2 Key instruction
guide.
Hold until you get a
confirmation “beep.”
Note: If double “buzz,”
an error has occurred.
Unlock, ensure drawer
can fully close and
drawer arm has
clearance.
Locked
“BEEP”
12
LOCK STATUS INDICATORS
Locked
Unlocked
Error (not fully locked)
Note: Unlock lock. Confirm
no obstructions. Fully close
cabinet and try again.
16
© 2013 InVue Security Products Inc. All rights reserved.
InVue is a registered trademark of InVue Security Products.
SD0172 Rev0 05/21/13
www.invuesecurity.com
Corporate Office (North America) // 704.752.6513 •888.55.INVUE
Europe, Middle East & Africa // +31.23.8900150
Asia Pacific // +852.3127.6811
Latin America // +52.55.9000.3957
Altri manuali inVue Serratura
