InWin IW-PLM Manuale utente

Home

User Manual

IW-PLM

Liquid Cooling Pedestal Server Chassis

IW-PLM

PREFACE

SAFETY INFORMATION

To ensure a safe and smooth operation of your InWin IW-PLM Tower, it is essential that you choose

an appropriate location for the system, provide an appropriate operating environment, and supply

an adequate amount of power for all components in the system. As you plan for installation, follow

the guidelines below to ensure that the system and its environment are safely and appropriately

positioned for efficient operation and service. Your system should be installed and serviced only by

a qualified technician.

Thank you for choosing the InWin IW-PLM Tower. This manual is written for system technicians who

are responsible for installation, managing, and repairing this server chassis. This document provides

an overview of all the features of the chassis, a list of accessories or other components you may

need to finish installation. It also provides instructions on adding and removing components

within the InWin IW-PLM Tower. For the latest version of this manual, you may visit InWin’s server

website.

User Manual

Proper Environment Selection: The system is designed to operate in a typical office environment:

• The location should be clean, dry, and free of airborne particles.

• It should be placed in a well-ventilated room, and away from sources of heat including direct sunlight

and radiators.

• It should be kept away from sources of vibration or physical shock.

• The space should be accommodated with a properly grounded wall outlet, and with sufficient space to

access the power supply cords.

• The operating environment temperature should be around 0°C to 40°C (32°F to 104°F).

Heed Safety Instructions: Before working with InWin IPC/storage/SMB storage server products, we strongly

recommend you use this guide as a reference and follow the safety instructions. The instructions in this

manual will help you ensure and maintain compliance with existing product certifications and approvals.

Follow the described, regulated components mentioned in this manual. Use of non-UL listing products or

other regulators may not comply with product regulations in the region(s) in which the product is sold.

Hazardous Conditions, Devices and Cables: Hazardous electrical conditions can be present on/in

power supply units and their cables. Disconnect the power cord and any other devices attached to the

server before opening the case. Failing to follow safety procedures will increase the risk of personal

injury or equipment damage.

System Power On/Off: The power button DOES NOT totally turn off the system AC power.

To remove the power of the system, you must unplug the AC power cord from the outlet or the system’s

power supply unit(s). Make sure the power cord is unplugged before you open the chassis or add/

remove any component.

To avoid damage and maintain your safety, please read the following terms listed below:

Installing or Removing Jumpers: A jumper is a short length conductor used to close, open, or bypass part of

an electronic circuit. Jumpers on InWin backplanes have a small tab on top that you can pick up with your

fingertips. Grip the jumper carefully and plug the jumper to cover the jumper pins on the backplane. Once

you need to remove the jumper, grip the jumper and carefully pull without squeezing.

Electrostatic Discharge (ESD) and ESD Protection: In most cases, ESD may damage disk drives,

electronic boards, and other parts. We recommend that you conduct installation only at an ESD free

space. If not possible, perform ESD protection protocol by wearing anti-static wrist straps attached to

the ground on any unpainted metal surface on your server during operation.

CAUTION

Do not populate hard drives and turn on the power until the system has stabilized. Make

sure hard drives and other components are properly connected before turning on the

system.

Tighten or loosen all screws with a screwdriver.

Apply the correct screws packed in the accessories box.

For your safety, please have at least two people lift and install the unit in its

designated area.

IW-PLM

User Manual

When you open the IW-PLM box, the contents should include the following:

Product Introduction

Box Contents

Accessories Box

IW-PLM

62 4

1 3

No Item No. Item

1Motherboard Stand-Offs x 16 5O.D.D screws x 4

2Motherboard Screws x 16 6Cable Ties x 10

32.5" SSD screws x 36 7Keys x 2

43.5" SSD screws x 12

Accessories Box

User Manual

General Information

Front View Side ViewInner Front View

No Item No Item

1Front panel lock 9PSU mounting area (CRPS or PS2 ATX)

2Indicator & front control panel 10 Full-height PCIe slots x 8

3Side panel lock 11 120 x 25mm PWM rear fan x 1 (pre-installed)

4O.D.D mounting area 12 Top 240/360mm water cooling radiator x 1

mounting area with built-in radiator bracket

580 x 25mm PWM hot-swap front fan x 1

(optional) 13 M/B mounting area

6IW-SK34-07 mounting area or

dummy cover x1 (optional) 14 Screwless adjustable GPU holder

7IW-SK23-07 mounting area or

dummy cover x1 (optional) 15 Bottom 240/360mm water cooling radiator x 1

mounting area with built-in radiator bracket

8Feet stands 16 Top 240mm water cooling radiator x 1

mounting area with built-in radiator bracket

1 2 8

13 144

IW-SK34-07

dummy cover

(optional)

IW-SK23-07

dummy cover

(optional)

Built-in radiator

bracket 360mm X2

Built-in radiator

bracket 240mm X1

IW-PLM

After unlocking and opening the front bezel, you can see the disk bays, and the control panel,

USB I/O ports and indicators are located on the left side.

No Item Color Status Description

System Fail LED

Green Solid on System ok

Amber Solid on System faulty

Hard Disk LED Green Blink System HDD accessing

LAN1-LAN4 LED Amber

Blinking Link between system and network

Off No data transmission or receiving is occurring

USB 3.0 Connector N/A USB ports

System Reset Button N/A Press the button to activate system reset

NMI Button N/A Press the button to activate user-defined function

7Power On/Off Button with LED

Blue

Solid on System is powered on

Off System is off

Chassis ID Button with LED Blue Solid on Press the button to activate system identification

Front Panel I/O and Indicators

User Manual

The rear panel of IW-PLM Tower contains the power supply mounting area, rear

I/O, 8 PCIe slots, and rear fan location.

No Item Description

1Rear I/O

(depends on M/B specifications) The I/O shield should come with the motherboard.

2Full height PCIe slots x 8 The slots support high profile cards.

The bracket should be removed before using.

3Power supply area This area is for installing CRPS & PS2 PSUs.

4Rear fan One 120 x 25mm PWM fan (pre-installed) for better system cooling.

5Security Supports padlock loop or Kensington lock with & intrusion switch

(optional).

6COM port support RS-232 Com port for DB-9.

Rear Panel Configuration

IW-PLM User Manual

Hardware Installation

Please follow the installation steps below to set up your IW-PLM. For a quick

installation video, please visit InWin’s Server YouTube channel.

The IW-PLM supports 80 x 25mm PWM fan x 1 in the front (optional). For the rear section, there is a

pre-installed 120 x 25mm PWM fan x 1.

Fan Installation

The InWIn IW-PLM is capable of housing CRPS redundant power supplies. With this function, the

system may continue to operate if one of the modules fail. To replace it, simply remove the failed

module, and then insert a replacement module.

Power Supply Installation

The top comes with 2 built-in 240mm & 240/360mm radiator brackets, which are compatible with

the InWin BR24/BR36 AIO liquid coolers (optional), or other 240/360mm liquid cooling radiators.

Liquid CPU Cooler Installation

It also supports 80 PLUS PS2 power supply units. The choice belongs to the user to install their own

preferred PSU. When changing to a PS2 power supply, it will require the use of the PS2 bracket (Part

No. 2RALXX651500). Please refer to the installation video for the installation steps.

For the bottom section comes with 1 built-in 240/360mm radiator bracket, which is also compatible

with the InWin BR24/BR36 AIO liquid coolers(optional), or other 240/360mm liquid cooling radiator.

For a quick installation video, please visit InWin IW-PLM Fan Installation

For a quick installation video, please visit InWin IW-PLM Liquid CPU Cooler Installation

For a quick installation video, please visit InWin IW-PLM Power Supply Installation

Indice

Manuali Telaio popolari di altre marche

Advantech

Advantech IPC-623 Series Manuale utente

IMC Networks

IMC Networks iMcV/18 Manuale utente

Chenbro

Chenbro RB13804N4WFT Manuale utente

Lenovo

Lenovo ThinkSystem SR665 V3 Manuale utente

Wuntronic

Wuntronic PCI4DRQ Manuale utente

EtherWAN

EtherWAN EMC400 Manuale utente

Overland Storage

Overland Storage SnapSAN S1000 Guida

Philips

Philips LC4.1E A Manuale utente

Supermicro

Supermicro SCF418 Series Manuale utente

Chenbro

Chenbro RM437 Series Manuale utente

Pickering

Pickering 40-914 Manuale utente

HP A7503-S Istruzioni per il montaggio

Supermicro

Supermicro SC823MTQ-R700LPB Manuale utente

SilverStone

SilverStone RMS08 Series Manuale utente

NI cRIO-FRC II Manuale utente

Pickering

Pickering 65-200 Manuale utente

Allied Telesis

Allied Telesis AT-MMCR18 Manuale utente

Hisense

Hisense MSD6586 Manuale utente