IOGear M1070 Manuale utente
1
GUWA200
PART NO. M1070
Installation
Installation Guide
Wireless USB Host Adapter
2
3
2
3
Table of Contents
System Requirements 4
Important Information 5
Package Contents 6
Device Overview 7
Installation 8
Software Installation 9
Connecting Wireless USB Host Adapter 12
Wireless USB Manager 14
Wireless USB Host Adapter Settings 16
Frequently Asked Questions 18
Technical Specications 20
Limited Warranty 21
Federal Communications Commission
(FCC) Statement
22
Contact 23
Appendix 24
Compatibility with GUWH104KIT 24
Cable association with Wireless USB
devices
25
4
5
System Requirements
- Microsoft Windows® XP 32-bit (Service Pack 2)
- Microsoft Windows® Vista® 32/64-bit
- USB 2.0 Compliant hardware and system
4
5
Important Information
Before you get started, please NOTE:
Do not place Wireless USB adapter under direct sunlight or near high heat emitting devices;
Do not place Wireless USB adapter near water or wet surfaces to avoid electric hazards;
Do not place Wireless USB adapter on any moving or unstable surfaces.
6
7
Package Contents
1 x Wireless USB Host Adapter (for PC)
1 x USB 2.0 Extension Cable (5 ft.)
1 x Quick Start Guide
1 x Registration / Warranty Card
1 x Installation CD (with User Manual)
6
7
LINK PWR
Device Overview
1. LINK: Data Transfer Activity Indicator
LED blinks when data is being transferreda.
2. PWR: Power
LED is solid when powered by the PCa.
12
Wireless USB Host Adapter
8
9
Installation
Please always check www.iogear.com for the latest drivers.
IMPORTANT NOTE:
If you purchase the hub kit GUWH104KIT, please refer to Appendix “Compatibility with GUWH104KIT” of
this User’s Manual in the CD-ROM for important information regarding steps to perform before the instal-
lation of the Wireless USB Host Adapter.
Before installing the Wireless USB Host Adapter GUWA200 software, please make sure that the Wireless
USB Host Adapter and other Wireless USB device are not connected to the computer and the Wireless
USB device is not powered.
8
9
Software Installation
Notes:
If installing on Windows XP, Service Pack 2 (SP2) is required. Please Verify that SP2 has been1.
installed on your PC before proceeding with the UWB installation software.
Microsoft .NET Framework 2.0 is required by the driver software. Once you begin the2.
software installation, if .NET Framework 2.0 is not installed on your PC, the software will
automatically prompt you to install it before proceeding to the UWB software installation.
Step 1 – Insert installation CD into the CD drive
on your computer.
Step 2 – Select “Software Installation” from
the menu.
10
11
Step 3 – The next screen will let you choose
whether to install the latest software from the
IOGEAR website or to install the software directly
from the installation CD.
By choosing Option 2: Download latest
software installer from the Web, a web browser
window will launch directing you to the IOGEAR
website where you’ll nd the most up-to-date
software. Once you download the software,
double-click on the .exe le to begin the installation
process.
If selecting Option 1: Install directly from CD, the
installation will start automatically.
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali IOGear Adattatore host
Manuali Adattatore host popolari di altre marche
Digital Equipment
Digital Equipment StorageWorks EK-KZPCM-UG Manuale utente
ATTO Technology
ATTO Technology ExpressPCI UL4S Manuale utente
Sun Microsystems
Sun Microsystems Sun StorEdge Manuale utente
LSI
LSI LSI21320-R Manuale utente
LSI
LSI Ultra160 Manuale utente
ATTO Technology
ATTO Technology ATTO ExpressPCI FC 3321 Manuale utente
Tekram Technology
Tekram Technology DC-820B Manuale utente
HighPoint
HighPoint RocketRAID 174x Manuale utente
Adaptec
Adaptec AHA-2944UW Manuale utente
ATTO Technology
ATTO Technology ATTO Celerity FC-81EN Manuale utente
ATTO Technology
ATTO Technology UL4D PCI Manuale utente
IBM
IBM System Storage DS4000 Manuale utente