IOT RF HC8301 Manuale utente

IoT RF
HC8301/HC8301A
User’s Manual
[V1.02]

1
Directory
1. Product Introduction............................................................................... 3
2. Network Connection................................................................................ 4
2.1 Downloading APP- “Cam Can”.............................................................................4
2.2 Power Supply........................................................................................................4
2.3 First Time Setup....................................................................................................5
2.3.2 Live View........................................................................................................................6
2.4 Add Camera..........................................................................................................7
2.5 Resetting the Camera...........................................................................................8
3. Operation.................................................................................................. 9
3.1 Live View...............................................................................................................9
3.2 Camera Settings.................................................................................................10
3.3 RF Device Paring and Configuration..................................................................13
3.3.1 IoT Devices......................................................................................................13
3.3.2 RF Devices ......................................................................................................14
3.3.3 Pairing RF Device............................................................................................14
3.4 RF Device Configuration ....................................................................................15
3.4.1 PIR Configuration ............................................................................................15
3.4.2 Door Sensor Configuration..............................................................................15
3.4.3 Thermal/Humidity Sensor Configuration.........................................................16
3.4.4 Smart Plug Configuration ................................................................................16
4. FAQ..........................................................................................................16
5. Maintenance and Service...................................................................... 17

2
Wherever you go, everything is under control.
The IoT camera connects with your smart phone or tablet anytime,
anywhere via wireless technology. It’s great for store surveillance, office and
home safety. Keep a watchful eye on your children, elders, and pets.
Before you start, please prepare:
Smart Phone / Tablet IoT Camera Wireless Router

3
1.Product Introduction:
1
Light Sensor
2
Microphone
3
Lens
4
IR LED
5
Speaker
6
LED
7
Reset Button
Notice: HC8301A’s light sensor is inside the head of IoT camera.
1
Wi-Fi Antenna
2
Power Connector
3
SD Card Socket

4
2. Network Connection:
2.1 Downloading APP- “Cam Can”:
Search the keyword "Cam Can” in Google Play/Apple Store or scan the QR Code below.
Please download it and install it on your smart phone/tablet.
Android:iOS:
2.2 Power Supply:
1. Connect the power supply to IoT camera
and plug it into the power outlet. Then the
LED on IoT camera will turn red. Please
wait 15 seconds for the startup test.
When the LED flashes green and orange,
and camera’s head moves for positioning,
the camera will be in AP mode.

5
2.3 First Time Setup:
1 Connecting to the Camera with Wi-FiAccess Point mode:
On your smart phone/ tablet, access your “Settings”and under “Wireless & Networks”click “Wi-Fi
“(Pic.1). Find “Cam Can-XX:XX:XX:XX:XX:XX” and connect to it. (For iOS, click on the Settings
shortcut and click on Wi-Fi) The default password is “12345678”.
2 Adding camera to Application(APP):
Open “Cam Can”and it will show the message “Do you want to connect to Wi-Fi Router” (Pic.2);
if you have a Wi-Fi router connected to the internet, please select “Yes”.
If not, please select “Cancel”; the camera will connect to your smart phone/tablet directly; but you
cannot use our system out of the camera’s wireless area.
Turning IoT camera into client mode:
When it displays a “Configuration–Wireless” screen (Pic.3), select the Wi-Fi router you want to use
and enter your Wi-Fi router’s password. Wait 30~40 seconds, when the LED turns to green, the
setup was successful. Now, the camera will appear on “Camera List” page.
Pic.1 Pic.2 Pic.3
iOS
Android

6
Notice:
1. Wi-Fi SSID is the name of your Wi-Fi router.
2. Make sure your smart phone or tablet and IoT camera are connected to the same Wi-Fi Router
3. If you entered the wrong SSID password the IoT camera will “Beep” twice. Please close the application
software and reconnect it again.
4. If the APP does not show “Do you want to connect to Wi-Fi Router?”please follow process 2.4 (P. 7).
2.3.2 Live View
1. Under “Camera List”, please click on the IoT camera you want to watch.
2. Sliding your finger to touch the area of the live video. You can tilt the IoT camera up and down, or
pan the camera left and right.
3. Please touch the live view and move your two fingers, you can zoom in or zoom out the video.
When you turn to landscape; the live view will be full screen.
iOS
Android

7
2.4 Add Camera
2.4.1 Adding a New IoT Camera under the Same Wi-Fi Router.
1. Use your Smart phone/Tablet and connect to your Wi-Fi router.
2. Run “Cam Can”.
Please choose “Add Camera” under “Camera List”page.
APP will scan the network to find all available IoT cameras. You may choose cameras listed in
black to connect, and grayed-out ones are already connected to the router.
Key-in password and press “√”. APP will add this IoT camera.
The default password is “admin”. Please change your password after setup.
Notice: If you input the wrong password, please delete this IoT camera. Then APP will ask you to
key-in the password again.
2.4.2 Adding a Remote Camera
1. Open "Cam Can", click “Add Camera", then click "Add Remote Camera”, please fill 20
characters found beneath the camera, under the barcode into “UID”. And type the default
password “admin” into “Password”.
iOS
Android
iOS
Android

8
2.4.3 QR Code to add Remote IoT Camera
1. Please get in to “Add Remote Camera”then click “QR Code”.
2. Use your Smart phone/Tablet to scan the QR Code.
3. Please input the password.
This remote IoT camera will be added.
Notice:
1. For security issue, we don’t have QR code label printed. You need to make it by yourself.
Please use this website:
https://www.the-qrcode-generator.com/
Input the 20 character UID into this website. Then, you can get the QR code picture.
2. The default password is “admin”. Please change the password after setup.
2.5 Resetting the Camera
If you forget the password, it will take you about 1 minute to reset to the original settings.
Please follow the process below:
1. Please press the “reset button” for 5 seconds, and it will “beep” three times.
2. System will reset immediately.
iOS
Android

9
3. Operation:
3.1 Live View:
1. Snapshot.
2. Snapshot Folder. (Picture below)
3. Video Record (*Must to have SD card inserted.)
4. Two-way Audio: Mute, Listen, and Speak.
5. IoT Devices
6. Resolution of Live View.
7. Cruise Mode (7.a pan left-right, 7.b tilt up-down.)
8. Mirror for Live View (8.a up-down inverse, 8.b left-right inverse.)
9. Return to Previous Screen
A. All system alarms On/Off (Green = ON, Red = OFF)
Android
iOS
Android
iOS
1. 2. 3. 4. 5.
--------------------6--------------------
--
7.a 7.b 8.a 8.b 9.
1. 2. 3. 4. 5.
--------------------6-------------------
-
7.a 7.b 8.a 8.b 9.
A.
A.
Questo manuale è adatto per i seguenti modelli
1
Indice
















