IP Camera 3-AXIS Manuale utente
1/42
User Manual
CMOS 2.0 Mega Pixel
3-AXIS IP Dome Camera
2/42
WARINGS
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MISTURE.
DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS.
CAUTION
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
COPYRIGHT
THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED
TO THEIR RESPECTIVE COMPANIES.
3/42
Content
I. PREFACE....................................................................................................................................... 4
II. PRODUCT SPECIFICATIONS....................................................................................................... 4
III. PRODUCT INSTALLATION ........................................................................................................... 6
A. MONITOR SETTING..................................................................................................................................... 6
B. HARDWARE INSTALLATION AND I/O PIN ASSIGNMENT............................................................................... 7
C. IPASSIGNMENT ....................................................................................................................................... 11
D. INSTALL ACTIVEXCONTROL:................................................................................................................... 13
IV. LIVE VIDEO.................................................................................................................................. 15
V. CONFIGURATION........................................................................................................................ 17
A. SYSTEM ................................................................................................................................................... 18
B. NETWORK ................................................................................................................................................ 22
C. A/V SETTING ........................................................................................................................................... 26
D. EVENT LIST.............................................................................................................................................. 32
VI. NETWORK CONFIGURATION .................................................................................................... 39
VII. FACTORY DEFAULT ................................................................................................................... 41
VIII. PACKAGE CONTENTS ............................................................................................................... 41
APPENDIX I .......................................................................................................................................... 42
V1.1_111229
4/42
I. Preface
3-Axis IP Dome is a professional CMOS Mega Pixel IP Dome. It has built-in web
server which enables user to view real-time video via IE browser. It also supports
simultaneously H.264/JPEG/ MPEG4 (3GPP Only) video compression with CMOS
M-Pixel Sensor which provides smooth and high video quality. The video can be
stored in the SD card, and can be playback remotely.
3-Axis IP Dome is an easy-to-use IP Camera which is designed for security
application.
II.Product Specifications
zSupport Video out
z2M CMOS Sensor
zPower over Ethernet available
z3-Axis Gimbal Adjustments
zH.264/ JPEG/ MPEG4 (3GPP only) compression
zSD card backup
z2-way audio
zSupport Cell Phone/PDA/3GPP
zSDK for Software Integration
zFree Bundle 36 ch Recording Software
Specifications
Hardware
CPU ARM 9 ,32 bit RISC
RAM 256MB
Flash 16MB
Image sensor 1/3” 2M CMOs sensor
Lens Type 1.47mm Fish Eye Lens
FOV 195°
I/O 1 in/ 1 Relay Out
Video Out x1
5/42
Audio In x1
Audio Out x1
Power over Ethernet Yes (Optional)
Power Consumption DC 12V 470mA
Dimensions ∮132 * H 108.4
Network
Ethernet 10/ 100 Base-T
Network Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP,
UPnP, 3GPP
System
Video Resolution
1600x1200, 1280x1024, 1280x960,1280x720,
800x600,640x480, 320x240, 176x144
Video Adjust Brightness, Contrast, Sharpness, BLC, Night Mode
Triple Streaming Yes
Image Snapshot Yes
Full Screen Monitoring Yes
Privacy Mask Yes, 3 different areas
Compression Format H.264/ JPEG/ MPEG4 (3GPP only)
Video Bitrates Adjust CBR, VBR
Motion Detection Yes, 3 different areas
Triggered Action Mail, FTP, Save to SD card, Relay
Pre/ Post Alarm Yes, configurable
Security Password protection
Firmware Upgrade HTTP mode, can be upgraded remotely
Simultaneous Connection Up to 10
Audio Yes, 2-way
SD card management
Recording Trigger Motion Detection, IP check, Network break down (wire
only),schedule, alarm
Video Format AVI, JPEG
Video Playback Yes
Delete Files Yes
Web browsing requirement
OS Windows 7, 2000, XP, 2003, Microsoft IE 6.0 or above
Hardware
6/42
Suggested Intel Dual Core 1.66G,RAM: 1024MB, Graphic card: 128MB
Minimum Intel-C 2.8G, RAM: 512MB, Graphic card: 64MB
*SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE.
III. Product Installation
A. Monitor Setting
i. Right-Click on the desktop. Select “ Properties”
ii. Change color quality to highest (32bit).
7/42
B. Hardware Installation and I/O Pin
Assignment
i. Connect a power adapter and IP Camera to PC or local network
ii. I/O Control Instruction
I/O terminal connector – used in application, for e.g., motion detection, event
triggering, alarm notifications. It provides the interface to:
1 Digital Input (GND+Alarm) – An alarm input for connecting devices that can
toggle between an open and closed circuit, for example: PIRs, door/window
contacts, glass break detectors, etc. When a signal is received the state changes
and the input becomes active.
Relay output (COM +N.O.) / (COM+N.C.) – An output to Relay switch, for
example: LEDs, Sirens, etc
iii. Digital Input
Alarm Input
1. GND (Ground) : Initial state is LOW
2. Alarm : Max. 50mA, DC 3.3V
3.5mm Phone Jack
(
Audio In
p
ut
,
Red
)
3.5mm Phone Jack
(
Audio Ou
t
p
ut
,
Green
)
8/42
Relay Output
1. N.C. (Normally Close): Max. 1A, 24VDC or 0.5A, 125VAC
2. COM: (Common)
3. N.O. (Normally Open): Max. 1A, 24VDC or 0.5A, 125VAC
iv. Relay
1. Digital Input connection
GND
ALARM
N.C.
COM
N.O.
Door/Window
Contacts
ALARM IN
RELAY OUT
9/42
2. Relay Output Connection
Or
GND
ALARM
N.C.
COM
N.O.
GND
ALARM
N.C.
COM
N.O.
10/42
v. PoE ( Power Over Ethernet)(Optional) 802.3af, 15.4W PoE Switch is
recommended
Power over Ethernet (PoE) is a technology that integrates power into a
standard LAN infrastructure. It enables power to be provided to the
network device, such as an IP phone or a network camera, using the
same cable as that used for network connection. It eliminates the need
for power outlets at the camera locations and enables easier application
of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days
a week operation.
Ethernet
PoE Switch
PoE IP Camera
PoE IP Camera
Ethernet Cable
Ethernet Cable
Altri manuali per 3-AXIS
1
Indice
Altri manuali IP Camera Telecamera di sicurezza
