IPC CT51-71 XP Manuale utente

This guide is intended for quick consultation only and does not replace the user and maintenance manual.

Before using the machine, read the user and maintenance manual contained in the machine’s packaging thoroughly and strictly follow all the

instructions.

PREPARATION & OPERATION

CT51-71 XP Quick guide

2 3

5 6

7 8

PLDC03881

PUSH

SET

ECO

AUTO

CHEM

PUSH

REPLACING THE SQUEEGEE BLADES

ATTACHING/REMOVING THE BRUSHES

Open the clip (Ref. 1).

Remove the two blade retainers (Ref. 2) by pushing them outwards then extracting them.

Remove the blade.

Reuse the same blade by reversing the edge in contact with the oor until all four edges are worn out, or replace with a new blade, tting it onto the

screws on the body of the squeegee.

Reposition the two blade pressing devices by centering the wider part of the slots on the squeegee body fastening pins, then push the blade pressing

devices inwards.

Close the hook again.

Replace the squeegee on its support, following the instructions described previously.

Automatic brush attachment, version with head lift actuator:

position the brush underneath the head, turn the selector to the “OFF” position, press the “SET” button once then press the “+” button, the machine will

complete the brush attachment sequence.

Automatic brush release, version with head lift actuator: