IPEX PH485Ex2 Manuale utente
Doc No: PH485Ex2-UM-001
IPEX
(IP Electronix)
14 January 2022
USER’S MANUAL
PH485Ex2
#2 RS-485/RS-422 OVER ETHERNET TERMINAL SERVER/CLIENT
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 2 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 3 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
CONTENTS
1. INTRODUCTION ........................................................................ 4
2. SPECIFICATIONS ....................................................................... 5
3. PACKAGE CHECKLIST................................................................. 6
4. TOP VIEW................................................................................. 7
5. BOTTOM VIEW ......................................................................... 7
6. FRONT VIEW............................................................................. 7
7. BACK VIEW............................................................................... 7
8. GENERAL INDICATORS .............................................................. 8
9. PORT INDICATORS .................................................................... 8
10. DEVICE POWER SUPPLY.......................................................... 8
11. RS-485/RS-422 SERIAL PORTS, PIN CONFIGURATION .............. 9
12. RS-485 CONNECTING METHODS ........................................... 10
13. RS-422 CONNECTING METHODS ........................................... 11
14. CONNECTION DIAGRAM....................................................... 12
15. DEVICE CONFIGURATION WEBPAGE..................................... 14
16. DEFAULT SETTINGS .............................................................. 20
17. NETWORK CONNECTION TESTING ........................................ 21
18. CONNECTING TO DEVICE VIA TCP SOCKET ............................ 23
19. REDIRECTING ....................................................................... 25
20. GUARANTEE......................................................................... 28
21. TECHNICAL SUPPORT ........................................................... 28
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 4 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
1. INTRODUCTION
IPEX PH485Ex2 bidirectional communication terminal server/client is a simple solution for
connecting serial devices to a network which results in having 2 RS-485 or RS-422 serial ports over
Ethernet network. This converter uses transparent communicate protocol, so it is not required to
understand complex Ethernet TCP/IP protocol, and no modification in serial programs is needed. It
operates as a Real COM, TCP Server, TCP Client, UDP Server and UDP Client Full-Duplex converter
and supports bidirectional connection.
Protection against Surge, ESD and EMI is implemented in its design and it has 3kV isolation between
Ethernet and RS-485/RS-422 sides. Furthermore, all the RS-485/RS-422 ports are insulated from each
other too.
PH485Ex2 is designed for industrial usage and is useful for connecting any device with a serial
interface to a computer via Ethernet supported network like LAN, WAN … and can be used in
Industrial Automation, Telecommunications, SCADA Systems, DCS Systems ….
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 5 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
2. SPECIFICATIONS
Number of Ports: #2 RS-485/RS-422 Serial Port, #1 Ethernet RJ45 (10/100 Mbps) Port;
Serial Standard: Meets or Exceeds the Requirements of TIA/EIA-485/422;
Network Protocols: ICMP, IP, TCP, UDP, DHCP, Telnet, DNS, ARP, HTTP;
RS-485 Signals: Data+, Data-, GND, Asynchronous Half-Duplex, 2-Wire Differential;
RS-485 Data Direction Control: ADDC (Automatic Data Direction Control);
RS-422 Signals: Tx+, Tx-, Rx+, Rx-, GND, Asynchronous Full-Duplex, 4-Wire;
Baud-Rate Type: Both Standard and Custom Baud Rates are Supported;
Baud-Rates: 50, 75, 110, 150, 300, 450, 600, 900, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
14400, 19200, 28800, 38400, 56000, 57600, 76800, 115200, 153600, 184320, 230400, 307200,
460800, 921600 bps; Selectable;
RS-485/422 Data Bits: 5, 6, 7, 8; Selectable;
RS-485/422 Parity: Even, Odd, None, Mark and Space; Selectable;
RS-485/422 Stop Bits: 1, 1.5, 2; Selectable;
Data Buffer: 4000 Bytes (2k Bytes Transmit, 2k Bytes Receive);
Power (Green) LED Indicator;
Transmit (Blue) and Receive (Yellow) LED Indicator for All Ports;
TCP Server (Green), TCP Client (Green) and UDP (Green) LED Indicator;
ESD Protection: RS-485 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM);
Dimensions: 145mm x 118mm x 27mm (5.70in x 4.65in x 1.06in);
Operating Temperature: -10°C to +70°C (+14°F to +158°F);
1 Year Guarantee and 5 Years Support.
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 6 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
3. PACKAGE CHECKLIST
Before installing the PH485Ex2, verify that the package contains the following items:
1) #1 PH485Ex2 Multiport 2) #1 Quick Start Guide
3) #1 Document and Driver CD-ROM 4) #2 DB9 Female Connector
5) #1 220V AC to 12V DC Adaptor 6) #2 Din Rail Brackets with the corresponding screws
NOTE: Notify your sales representative if any of the above items is missing or damaged.
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 7 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
4. TOP VIEW
5. BOTTOM VIEW
6. FRONT VIEW
7. BACK VIEW
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 8 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
8. GENERAL INDICATORS
POWER LED (Green): It is turned ON, when the power supply connects to +VDC and GND correctly.
9. PORT INDICATORS
TCP Server LED (Green): Blinking this LED shows that the TCP Server mode for this port is selected and
device is trying to connect in this mode. If the device connects to a client, then this LED turns on
continuously.
TCP Client LED (Green): Blinking this LED shows that the TCP Client mode for this port is selected and
device is trying to connect in this mode. If the device connects to a server, then this LED turns on
continuously.
UDP LED (Green): Blinking this LED shows that the UDP mode for this port is selected and device is
trying to connect in this mode. If the network works properly, then this LED turns on continuously.
PE LED (Red): It is blinking if the device detecting a Parity Error in data.
RX LED (Yellow): It is blinking when the device receive data on serial port.
TX LED (Green): It is blinking when data is transmitting from the device serial port.
REDIRECT IN (YELLOW): It is turned on if data from other ports are redirected to this port.
REDIRECT OUT (GREEN): It is turned on if data from the port are redirected to any other port.
10.DEVICE POWER SUPPLY
To working properly, you should connect a DC Power Supply to PH485Ex2. The voltage of the Power
Supply should be from +8V to +48V. For example, this device is working with a single +12V, +15V or
+24V DC Adaptor as well.
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 9 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
11.RS-485/RS-422 SERIAL PORTS, PIN CONFIGURATION
www.ipelectronix.com
IPEX (IP Electronix) PH485Ex2: User’s Manual
Page 10 of 28 Doc No.: PH485Ex2-UM-001
14 January 2022
12.RS-485 CONNECTING METHODS
-RS-485: Point to Point Connection
-RS-485: Multipoint Network
Altri manuali per PH485Ex2
1
Indice
Altri manuali IPEX Convertitore multimediale
