IPUX ICS2030 Guida all'installazione
ICS2030
Cube Type H.264 Mega Pixel
Wireless Network Camera
Advanced Installation Guide
Version 1.0
- 1 -
PREFACE
Thank you for purchasing ICS2030, a standalone system that can
be connected directly to an Ethernet or Fast Ethernet network.
Equipped with a megapixel CMOS sensor, the camera allows you
to capture a wider field of view with a resolution of up to 1280 x
1024. With support for latest H.264 technology, you can record
streaming video that utilizes high quality H.264 images to your hard
drive, enable motion detection and setup automated e-mail alerts
for security. The built-in microphone and audio ports provide you
with the extensive audio function, allowing you to “watch” and
“listen” from the camera.
Compared to the conventional PC Camera, this camera features a
built-in CPU and web-based solutions that can provide a cost-
effective solution to transmit the real-time high-quality video
images and sounds synchronously for monitoring. The camera can
be managed remotely, so that you can use a web browser to
access and control it from any desktop/notebook computer over
the Intranet or Internet.
The simple installation procedures and web-based interface allow
you to integrate it into your network easily. With comprehensive
applications supported, the Internet camera is your best solution
for remote monitor, high quality, and high performance video
images.
- 2 -
This Advanced Installation Guide provides you with the instructions
and illustrations on how to use your camera, which includes:
Chapter 1 Introduction to Your Camera describes the features
of the camera. You will also know the components and
functions of the camera.
Chapter 2 Hardware Installation helps you install the camera
according to your application environment. You can
use this camera at home, at work, at any where you
want.
Chapter 3 Accessing the Camera lets you start using your
camera without problem. The camera can be set up
easily and work within your network environment
instantly.
Chapter 4 Configuring the Camera guides you through the
configuration of the camera using the Web browser on
your PC.
Chapter 5 Appendix provides the specification of the camera
and some useful information for using your camera.
NOTE The illustrations and configuration values in this guide are for
reference only. The actual settings depend on your practical
application of the camera.
- 3 -
Contents
Preface ....................................................................................................1
Chapter 1 Introduction To Your Camera..................................................4
1.1 Checking the Package Contents ...............................................4
1.2 Getting to Know Your Camera...................................................5
1.3 Features and Benefits................................................................7
1.4 System Requirement.................................................................9
Chapter 2 Hardware Installation.............................................................10
2.1 Installing the Camera Stand ....................................................10
2.2 Connecting the Camera to LAN/WLAN....................................11
2.3 Applications of the Camera......................................................13
Chapter 3 Accessing The Camera.........................................................14
3.1 Using IPFinder.........................................................................14
3.2 Accessing to the Camera.........................................................15
3.3 Configuring the IP Address of the PC......................................18
Chapter 4 Configuring The Camera.......................................................19
4.1 Using the Web Configuration...................................................19
4.2 Quick Setup.............................................................................20
4.3 Basic Setup .............................................................................24
4.4 Network Settings .....................................................................27
4.5 Setting up Video & Audio.........................................................36
4.6 Event Server Configuration......................................................41
4.7 Motion Detect ..........................................................................46
4.8 Event Configuration.................................................................47
4.9 Tools........................................................................................50
4.10 USB.........................................................................................52
4.11 Information...............................................................................53
Appendix................................................................................................54
A.1 Specification............................................................................54
A.2 Glossary of Terms ...................................................................56
- 4 -
CHAPTER 1
INTRODUCTION TO YOUR CAMERA
1.1 Checking the Package Contents
Check the items contained in the package carefully. You should
have the following:
One ICS2030
One AC Power Adapter
One External Antenna
One Camera Stand
One Ethernet Cable (RJ-45 type)
One Installation CD-ROM
One Quick Installation Guide
NOTE Once any item contained is damaged or missing, contact the
authorized dealer of your locale.
- 5 -
1.2 Getting to Know Your Camera
Front and Right-side Panel
NOTE After long pressing the Unmount button for four seconds, the
Power LED starts flashing. When the Power LED resumes the
steady amber light, you can remove the USB device safely.
Internal Microphone
allows the camera to
receive sound and voice.
Infrared LEDs (x 6)
allow your camera to
capture clear image in
a dark environment.
Lens Assembly
Light Sensor is used
to trigger on and off the
Infrared LEDs according
the environmental light
level.
USB Port allows you
to connect an external
USB device. It
provides the power
distribution up to
500mA.
USB Unmount
Button is used to
remove the connected
USB device safely.
Power LED indicates the
camera is powered on with
the steady amber light.
Link LED indicates
the camera’s network
connectivity with the
flashing green light.
- 6 -
Back Panel
* For more information of the WPS button, refer to the instruction of the Web
Configuration, Network >> Wireless >> WPS Setting.
Screw Hole
is used to connect
the camera stand.
Audio-out Connector
(for 2-way audio
model) is used to
connect an external
active speaker.
Reset Button will restart
the camera when it is
pressed quickly; when it is
long pressed for five
seconds, the camera will
resume the factory default
settings.
DC Power Connector
is used to connect the
AC power adapter, in
order to supply power
to the camera.
Ethernet Cable
Connector is used to
connect the network
cable, which supports
the NWay protocol so
that the camera can
detect the network
speed automatically.
Wireless Antenna
WPS Button*
is used to protect
your WLAN.
- 7 -
1.3 Features and Benefits
H.264/MPEG4/MJPEG Multi-codec Supported
The camera provides you with excellent images by the
H.264/MPEG4/ MJPEG multi-codec selectable technology,
allowing you to adjust image size and quality, and bit rate
according to the networking environment.
High Resolution Surveillance
Equipped with a megapixel CMOS sensor, the high
performance camera is designed for your professional
surveillance and security applications. The image resolution
is up to 1280 x 1024. In addition, the minimum illumination of
the sensor is 1 lux, providing a truly day & night function that
allows you to capture image even in low-light conditions.
Multiple Profiles Supported
The camera supports multiple profiles simultaneously, so
that you can separately set up different image settings (such
as image quality and frame rate) for the three video types of
the camera: H.264, MPEG4, MJPEG, and 3GPP.
Flexible Audio Capability
The camera allows you to connect the external microphone
to receive on-the-spot audio via the Internet, allowing you to
monitor the on-site voice. In addition, you can connect an
external active speaker to the camera to speak through the
camera (supporting mono audio only).
Supports RTSP
The camera supports RTSP (Real Time Streaming Protocol),
which is a technology that allows you to view streaming
media via the network. You can view the real-time video with
the Quick Time player or RealPlayer. To view the real-time
streaming image on your computer, open the Web browser
and enter the RTSP link:
MPEG4 stream: rtsp://(IP address of the camera)/mpeg4
H.264 stream: rtsp://(IP address of the camera)/h264
- 8 -
Remote Control Supported
By using a standard Web browser or the bundled UltraView
Pro software application, the administrator can easily change
the configuration of the camera via Intranet or Internet. In
addition, the camera can be upgraded remotely when a new
firmware is available. The users are also allowed to monitor
the image and take snapshots via the network.
Mobile Device Viewing Supported
The camera supports real time video viewing on your mobile
device. After installing the required software applications,
you can easily motor the camera’s real-time video from your
iPhone, iPod Touch, or iPad (requires iPhone OS 3.1 or
later). The latest Android phone can be supported too.
For iPhone application software, please search "iPuxCam" in
the app store on iPhone to download and install.
For Android application software, please visit the website:
http://www.ipux.net to download and install.
Multiple Platforms Supported
The camera supports multiple network protocols, including
TCP/IP, SMTP e-mail, HTTP, and other Internet related
protocols. Therefore, you can use the camera in a mixed
operating system environment, such as Windows Vista and
Windows 7.
Multiple Applications Supported
Through the remote access technology, you can use the
cameras to monitor various objects and places for your own
purposes. For example, babies at home, patients in the
hospital, offices and banks, and more. The camera can
capture both still images and video clips, so that you can
keep the archives and restore them at any time.
WPS Supported
WPS (Wi-Fi Protected Setup) standard is a new solution that
simplifies the process of configuring Wi-Fi security settings,
allowing you to establish a secure wireless network by
simply pressing a button.
- 9 -
1.4 System Requirement
Networking
LAN: 10Base-T Ethernet or 100Base-TX Fast
Ethernet; Auto-MDIX.
WLAN: IEEE 802.11b/g/n
Accessing the Camera using Web Browser
Platform: Microsoft® Windows® 2000/XP/Vista/Win7
CPU: Intel Pentium III 800MHz or above
RAM: 512MB
Resolution: 800x600 or above
User Interface:Microsoft® Internet Explorer 6.0 or above;
Apple Safari 2 or above; Mozilla Firefox
2.00 or above; Google Chrome
Accessing the Camera using UltraView Pro
Platform: Microsoft® Windows® XP/Vista/Win7
Resolution: 1024x768 or above
Hardware Requirement:
1~8 cameras: Intel Core 2 Duo 2GB RAM
9~32 cameras: Intel Core 2 Quad 4GB RAM
NOTE If you connect multiple cameras to monitor various places
simultaneously, you are recommended to use a computer with
higher performance.
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali IPUX Telecamera di sicurezza
