IPX DDK-1801BC Manuale utente

INSTALLATION &

OPERATION MANUAL

DDK-1801BC

Fixed Indoor/Outdoor IP Bullet Camera

(AF Lens)

Table of Contents

SAFETY PRECAUTIONS .............................................................................4

1. DESCRIPTION..........................................................................................6

1.1 PHYSICAL DESCRIPTION...............................................................6

1.2 THE RESET BUTTON ............................................................................8

1.3 ALARM WIRING DIAGRAM ......................................................................9

1.4 THE USB FUNCTION ..........................................................................10

2. INSTALLATION ......................................................................................11

2.1 HARDWARE INSTALLATION ..................................................................11

2.2 PLACING A DESICCANT PACK INSIDE THE DDK-1801BC......................11

2.3 UPDATING SYSTEM SOFTWARE ..........................................................12

3. Network Configuration..........................................................................13

3.1 CABLE CONNECTIONS........................................................................13

3.1.1 DDK-1801BC to Computer connection..........................................................................13

3.1.2 DDK-1801BC to Network Switch (INTRANET)...........................................................13

3.2 NETWORK SETTINGS CONFIGURATION ................................................14

3.2.1 Enabling DHCP Function................................................................................................14

3.2.2 Setting an IPAddress.......................................................................................................14

3.3 TCP/IP COMMUNICATION SOFTWARE .................................................15

3.4 TCP/IP INSTALLATION .......................................................................17

3.5 TCP/IP CONFIGURATION SETTING ......................................................18

3.6 CONNECTION TESTING.......................................................................19

4. Operating Instructions for Network Connection................................21

4.1 WEB BROWSER .................................................................................22

4.1.1 Connecting the DDK-1801BC ........................................................................................22

4.1.2 Live Video........................................................................................................................23

4.1.3 Setup ................................................................................................................................26

5. ADVANCED OPERATION......................................................................76

6. SPECIFICATIONS...................................................................................79

7. Client System Requirements................................................................81

APPENDIX 1. –How to run DDK-1801BC UPnP ......................................82

APPENDIX 2. –Register as a DDNS member ..........................................92

SAFETY PRECAUTIONS

Please read the following safety and operational instructions carefully to prevent harm or injury to

the operator.

 Do not use liquid cleaners or aerosols for cleaning.

WARNING

 To prevent fire or shock, avoid exposing this unit to moisture.

 Do not block ventilation openings.

 Never spill liquid of any kind on the camera

 Do not attempt to service the DDK-1801BC yourself. Opening the DDK-1801BC’s

enclosure may expose the user to electrical shock. Please refer all servicing to

your reseller.

1. DESCRIPTION

1.1 PHYSICAL DESCRIPTION

Internal View SCREWS

SUN SHIELD

SD PCB

LENS FAN

FRONT CASE

IR PCB

SENSOR PCB

PCB PLATE

POWER PCB

MIDDLE CASE

WATERPROOF RUBBER

REAR CASE

External View

NOTE: Use the 2 provided screws to attach the sun shield (above) into the 2 extreme holes

shown in the picture below to get an unobstructed viewing angle.

Do not use the middle hole in the camera as that will block the view.

The PCB board:

123 4 5

6 7 8 9 10

1. Power Input: AC 24V input that connects to an external power supply.

2. ETHERNET 10/100 Connector: Standard RJ-45 connector for 10/100 Mbps Ethernet

networks. PoE (Power over Ethernet) function: Provides power to the device via the same

cable as used for the network connection.

3. Plug Input: DC 12V input that connects to an external power supply.

4. GPIO: 6-PIN connector including Digital output/input, DC output and GROUND for

connecting with external devices.

5. VIDEO OUT Connector: Connector providing composite video output.

6. AUDIO IN: Connector to receive audio input from external devices.

7. USB port: Connects DDK-1801BC to a USB port on a computer.

8. AUDIO OUT: Provides audio to an external device.

9. SD/ SDHC CARD slot: Used for updating system software and archiving video.

10. RESET: Reset to factory default. (Refer to section 2.4 The Reset Button.)

1.2 The Reset Button

The Reset Button will bring the DDK-1801BC back to its factory default settings. Press the Reset

Button for about 10 seconds. A Blue screen will be displayed and a text that says “RESETTING…”

will appear. The device will then auto reboot. All settings will then be back to default. The following

items will return back to default.

[SETUP]

Network Setup

a. LAN Settings (You can manually reset this function.)

b. PPPOE Settings (You can manually reset this function.)

Dynamic DNS

a. DYNAMIC DNS SETTING (You can manually reset this function.)

IMAGE SETUP

a. Privacy Mask Setting

b. IMAGE SETTINGS

AUDIO AND VIDEO

a. VIDEO PROFILE 1

b. VIDEO PROFILE 2

c. AUDIO SETTINGS

MOTION DECTION

a. Video Motion setting

TIME AND DATE

a. TIME CONFIGURATION

b. AUTOMATIC TIME CONFIGURATION

c. SET DATE AND TIME MANUALLY

Event Setup

a. Server

b. Media

c. Event

d. Recording

[ADVANCED]

DI and DO

a. DI and DO

b. LED

c. VIDEO OUTPUT

ICR

a. ICR

HTTPS

a. HTTPS

Access List

a. Allow List

b. Deny List

1.3 Alarm wiring diagram

DDK-1801BC

GND

Di -

Di +

Do -

Do +

+12V

1.4 The USB function

The DDK-1801BC can provide two separate functions by connecting the DDK-1801BC with a PC

via the USB connector

1. Using an SD card as a card reader.

Insert an SD card into the DDK-1801BC and then connect to the PC. You may then transfer files

between the SD card and the PC. Once you've connected your DDK-1801BC to your computer

Windows will detect the connection and ask you what you want to do with the SD card.

2. Using an SD card as a configuration tool.

Before using the USB configuration setting page remember to remove the SD card or the PC

won’t show this window.

DHCP ON

DHCP OFF

(default)

Network

Setting

NOTE: After changing the settings, click the “Apply” button. All changes will be effective

after removing the USB connector.

NOTE: After the IP address has been changed or reset, unplug the network cable and

then plug it in again to make sure the network connection is in normal mode.

Indice

Altri manuali IPX Telecamera di sicurezza

IPX

IPX DDK-1000 Manuale utente

Manuali Telecamera di sicurezza popolari di altre marche

Okina USA

Okina USA SIR36-870VF650LP Manuale utente

Divio

Divio NDR155PA Manuale utente

Canon

Canon VB-C500D Manuale utente

Easy Access

Easy Access EasyGuard Manuale utente

Vivotek

Vivotek FD9389-EHV-v2 Manuale utente

TUYA

TUYA COSMO W2 Manuale utente

Eusso

Eusso UNC7500-IR Guida all'installazione

urmet domus

urmet domus 1096/204 Manuale utente

VC VC20 series Manuale utente

Axis

Axis Q1614 Manuale utente

ieGeek

ieGeek DD201 Manuale utente

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuale utente

Vicon

Vicon V662-D-1 Istruzioni operative

Grundig

Grundig GCH-K0274P Manuale utente

Lorex

Lorex VANTAGE LBC7032 Manuale utente

4xem

4xem WPT Manuale utente

Samsung

Samsung SCV-3082 Manuale utente

Vitek

Vitek VTC-C544 Manuale utente