IRIS ST5e Manuale utente

ST5e –Version 3.0

Table of Contents

KNOWING YOUR DEVICE 3

DEVICE SPECIFICATION 5

BASIC INSTALLATIONS 6

THE BATTERY 6

GUIDELINE FOR INSTALLING SIM/SAM CARD 6

GUIDELINE FOR INSTALLING MICRO SD CARD 7

FIRST TIME USE 8

SCREEN CALIBRATION 8

TIME,DATE AND TIME ZONE CONFIGURATION 8

TOUCH SCREEN OPERATIONS 9

USING THE STYLUS 9

START MENU 10

SHELL TASKBAR 11

SOFTWARE INPUT PANEL (SIP) 12

KEYPAD 13

CUSTOMIZING ST5E 14

LCD BRIGHTNESS CONTROL 15

KEYPAD LIGHT CONTROL 17

POWER 18

DISPLAY 19

MOUSE 20

KEYBOARD 20

AUDIO VOLUME 21

STYLUS PROPERTIES 21

NETWORK &DIAL –UP CONNECTION 22

REGIONAL AND LANGUAGE SETTING 22

OWNER PROPERTIES 23

PC CONNECTION 23

STORAGE PROPERTIES 24

SYSTEM PROPERTIES 25

PASSWORD PROPERTIES 25

SCREEN ROTATION 26

TASKBAR &SECURE SHELL 26

INPUT SELECTION PANEL 27

DATE &TIME PROPERTIES 27

INTERNET OPTIONS 28

REMOVE PROGRAMS 28

INTERNET EXPLORER 29

FEATURES 30

WIRELESS LAN (WI-FI)USAGE 30

BLUETOOTH USAGE 32

GSM USAGE 37

USING THE CONTACT CARD READER 39

USING THE FINGERPRINT SENSOR

USING THE BARCODE SCANNER

APPENDIX: TROUBLESHOOTING GUIDE 41

RESET THE ST5E AND CLEAR MEMORY

IF ST5E RUNS OUT OF POWER

IF ST5E RUNS OUT OF MEMORY

INACCURATE RESPONSE TO STYLUS TAPS

ROUTINE MAINTENANCE

BATTERY GUIDELINES 45

TRAVEL GUIDELINES 45

SHIPPING GUIDELINES 46

FRONT

Knowing Your Device

Power Button

TOP

BOTTOM

REAR

SIDE

Device Specification

Systems

Memory 256MB DDR-2 RAM, 4GB Flash

Memory Expansion 1 x micro-SD Memory Slot (Support up to 32GB)

Device Operating System WinCE 6.0

Host PC Operating System Windows® 7/ Vista/ XP

Programming Language C++ Programming, NET Programming in Microsoft® Visual Studio 2005

Communication Interfaces

Bluetooth Bluetooth Version 2.0

Wireless LAN IEEE 802.11 b/g Wi-Fi

Network 3.5G - W-CDMA, 850, 1900, 2100 MHz ,GSM/ GPRS/ EDGE (1 x SIM Slot)

USB USB Client 1.1 (ActiveSync)

Human Interfaces

Displays 3.5” (480x640) Transflective TFT Colour Touch Screen

Keypad 12 Alphanumeric Buttons, 3 Function Buttons and 1 Power On/Off Button

LED 1 x Power Status, 1 x Network Status, 1 x Charge Status

Speaker Built-in Mono Speaker

Power

Battery 7.4V 1800mAH Li-ion Battery

Operating Time 4 - 6 Hours

Mechanical

Dimension (LxWxH)(mm) 197 x 92 x 44

Weight Approximately 600g

Environment

Operating Temperature -10°C to +50°C

Storage Temperature -20°C to +60°C

IP Rating (Water & Dust Protection) IP65

Drop Test 1.5m

Contact Card Reader

Standard ISO/IEC 7816 Part 1, 2, 3, (T=0, T=1)

Card Slot 1 x ID-1 Card Slot

3 x ID-0 SAM Slots

Communication Speed 9.6 kbps up to 115.2kbps

Card Type Class A & B

Contactless Reader

Standard ISO/IEC 14443 A/B Part 1, 2, 3, 4

Card Type MiFARE Classic / Ultralight / Ultralight C /Desfire / MiFARE Plus / Sony

FeliCa / HID iclass

Card Transmission Rate Up to 848 kbps (Card Type Dependant)

Camera

Resolution 5 Megapixels (LED Flash)

Fingerprint Sensor

Sensor Optical sensor

Resolution 500dpi

Active Area 14mm x 22mm

Supported Template Sagem Algorithm

Template Formats Morpho Proprietary, ISO 19794-2, ANSI/ INCITS 378, RAW/Bitmap,

WSQ (Optional)

1D/2D Barcode Scanner (Optional)

Supported Standards EAN8, EAN13, CODE39, CODE128, Interleaved 2 out of 5, PDF417, DATA

MATRIX, QR-Code, Aztec

GPS (Optional) A-GPS

The Battery

The battery has been partially charged at the factory, however please charge it for 4 hours

before switching on the device for the first time.

Guideline for Installing SIM/SAM card

WARNING

Keep all SIM cards out of the reach of children.

The SIM card and its contacts can be easily damaged by scratches or bending.

Be careful when handling, inserting or removing the card.

Before installing the SIM card, always make sure that the device is fully charged as the

application will not work properly with insufficient amount of power.

To insert SIM card

1) Close all programs and switch off the device.

2) Remove the hand strap.

3) Unlock both wing locks.

4) Remove the Battery cover.

5) Remove the Battery pack.

6) Unlock the SIM Slot and pull back the cover for insertion.

7) Ensure that the cut corner faces top right and the gold contacts of the card is facing

downwards into the device.

8) Push down the SIM slot cover and slide outward to lock it.

SAM A

SAM B

SAM C

SIM

(Slot 0)

(Slot 2)

(Slot 3)

Basic Installations

9) Place the battery back followed by battery cover.

10) Push the wing lock to secure the battery cover and finally install the hand strap back

into the hand strap tab.

To insert SAM card

1) Insert the SAM cards into slot 0, 2, 3.

2) Insertion steps are the same as SIM card insertion steps.

3) SAM card is for internal security.

Guideline For Installing Micro SD Card

1) Close all the programs and switch off the device.

2) Remove the hand strap.

3) Unlock both wing locks.

4) Remove the battery cover.

5) Remove the battery pack.

6) Unlock the Micro SD slot and pull back the cover until easy for insertion.

7) When inserting the Micro SD card, ensure that the gold contacts of the card is

facing downwards into the device.

8) Push the Micro SD slot cover down and slide inward to lock it.

9) Place the battery back followed by battery cover.

10) Push the wing lock to secure the battery cover and finally install the hand strap back

into the hand strap tab.

Micro SD

Screen Calibration

Once the charging has completed, turn on the device by pressing the power button.

On the first time basis, it is advisable to calibrate the screen by going to:

-> Settings -> Control Panel -> Stylus.

Follow the cursor and tap on it. Kindly set the Time, Date and Time Zone as the default time,

date and time zone differ from place to place.

Time, Date and Time Zone configuration

Go to -> Settings -> Control Panel -> Date/Time to set the Time, Date and Time Zone.

First Time Use

Carefully press and briefly hold the

stylus on the center of the target.

Repeat as the target moves around

the screen. Press the ESC key to

cancel

The following defines the various operations that the user can perform with the stylus.

Tap

Tap once to select a program

Double Tap

Tap the item twice to open or execute a program

Drag

Hold the stylus on the screen to drag objects

The stylus is housed inside the stylus holder at the right corner of the device.

IMPORTANT

Avoid misplacing the stylus by always storing it in the stylus holder when not in use.

Avoid breaking the tip of the stylus.

Use only the stylus that comes with the ST5e or some other stylus type instrument with

a soft, blunt point to perform touch screen operations. Never use a pen, pencil, or other

sharp writing element.

Touch Screen Operations

Using the Stylus

Indice

Altri manuali IRIS PDA

IRIS

IRIS ST4ex Manuale utente

Manuali PDA popolari di altre marche

SPOT

SPOT SPOT Manuale utente

Palm

Palm handheld Manuale utente

Winmate

Winmate E500QK Manuale utente

Getac

Getac PS236 Manuale utente

Sharp

Sharp CE-1600P Manuale utente

HTC

HTC PHAR100 Manuale utente

Mindeo

Mindeo M40 Manuale utente

Acer

Acer n30 Manuale utente

ASCOM

ASCOM 9D24 EX Manuale utente

Unitech

Unitech PA520BTNF Manuale utente

HandHeld

HandHeld Nautiz X3 Manuale utente

Casio

Casio PALM Manuale utente

Sharp

Sharp TM-20 Guida rapida

Atid

Atid AT870 Manuale utente

AML

AML M7225 Manuale utente

Audiovox

Audiovox Maestro Manuale tecnico

Casio

Casio PV-750 Plus Manuale di istruzioni e di sicurezza

Unitech

Unitech PT630 Manuale utente