ISA METRO N VA 93 Manuale utente

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

ISA S.r.l.

Via del Lavoro, 5

06083 Bastia Umbra - Perugia - Italy

Tel. +39 075 80171 - Fax +39 075 8000900

www.isaitaly.com

METRO’

93 N VA RV VA RV LS

129 N VA RV VA RV LS

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

1. NOTES / IMPORTANT NOTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

1.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

1.2 Manufacturer's contact details. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

2. SAFETY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.1 Personnel training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.2 Safety devices applied . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.2.1 Safety devices present . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.2.2 Fixed protective devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2.2.3 Sectioning the electrical power supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.3 Residual risks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.3.1 Risk of contact with parts under stress . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.3.2 Fire. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

2.3.3 Explosive atmosphere . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.3.4 Slipping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.3.5 Tripping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.3.6 Circuit faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

2.4 Warning signs (if any) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

3. WASTE DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

4. INSTALLATION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.1 Storage and unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

4.2 Installation, positioning and ambient conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

4.3 Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5. TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5. TECHNICAL SPECIFICATIONS N VA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

5. TECHNICAL SPECIFICATIONS RV VA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

5. TECHNICAL SPECIFICATIONS RV LS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5.1 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

5.2 Positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

5.3 Levelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

5.4 Load limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

5.5 Shelves load limits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.5 Adjusting shelves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

6. EQUIPMENT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

6.1 Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

6.2 Identiﬁcation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

7. CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

7.1 Start-up. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

7.2 User Interface XR44CX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

7.2.1 Functions XR44CX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

7.3 User Interface EW978 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

8. CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8.1 Chiller compartment inside cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8.2 Accessing and cleaning the condensing unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

8.3 External cleaning operations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

9. MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

10. TECHNICAL ASSISTANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

10.1 Faults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

10.2 List of alarms on the electronic controller (if any) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

11. WARRANTY TERMS AND CONDITIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

N° ATTACHMENTS

1Wiring diagram 412100394000 29

2Wiring diagram 412100395000 30

3Wiring diagram 412100396000 31

4Wiring diagram 412100401000 32

5Wiring diagram 412100402000 33

6Wiring diagram 412100404000 34

7Wiring diagram 412100405000 35

8Declaration of conformity 36

The manual contains symbols to attract the reader’s attention and highlight particularly

important aspects. The table below illustrates the meaning of the various symbols used.

Read the instructions manual

Danger: Live electrical parts

Use of protective clothing

Requests for maintenance or operations must

be carried out by qualiﬁed staff or technical

after-sales centres.

Attention / Danger

Information

Important information

Operations that must be performed by two

persons.

Visual observation

Condensing unit on board

Notes / Important notes

Remote condensing unit

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

1. NOTES / IMPORTANT NOTES

The content of this manual is of technical nature and is owned by ISA. It is forbidden to

reproduce, circulate or modify all or part of its content without written consent. Any

infringement will be legally pursued.

The manual and the conformity certiﬁcate are an integral part of the equipment and should

always accompany the product in the event of transferral to a new location or to a new owner.

The user is responsible for the integrity of these documents, for their consultation during the

whole life cycle of the equipment itself. Keep this manual in a safe place. It should be made

available near the equipment for consultation at any time. If lost or destroyed, you can request

a copy of the manual to ISA by specifying the exact model, identiﬁcation number and year of

manufacturing. The manual reﬂects the manufacturing technology at the time of supply. The

manufacturer reserves the right to modify its products in any way it deems necessary, with

no obligation to update manuals and machines relating to previous manufacturing batches.

This equipment is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities or by persons lacking the necessary experience and knowledge,

unless they are supervised by a person responsible for their safety who has instructed them

on how to use the cabinet. Children should be supervised to ensure that they do not play

with the equipment. Always refer to this manual before going ahead with any operation.

Before doing any type of work, disconnect the equipment from the power supply. Any work

on electric and electronic parts or cooling system components should only be carried out by

trained personnel in compliance with current laws.

The Manufacturer cannot be held liable for any injury to persons or animals, or damage to the

product itself in the event of:

• Improper use of the equipment or use of the appliance by unqualiﬁed or unauthorised

personnel.

• Failure to comply with current legislation.

• Incorrect installation and/or power supply faults.

• Failure to observe the instructions contained in this Manual.

• Failure to follow the maintenance programme.

• Unauthorised modiﬁcations.

• Installation of non-original spare parts in the equipment.

• Installation and use of the equipment for purposes other than those for which the

appliance was designed and sold.

• Tampering with or damage to the power supply cable.

Liability for applying the safety instructions contained in this manual is held by the technical

personnel responsible for the intended use of the equipment, who should ensure that

authorised personnel:

• Are qualiﬁed to carry out the requested activity.

• Are aware of, and carefully comply with, the instructions contained in this document.

• Are aware of, and apply, the general safety standards applicable to the equipment.

Failure to comply with safety standards may result in injury to personnel and damage to the

equipment components and control unit. The user can contact the dealer to request additional

information not contained in this document, or suggest improvements, at any time.

Before the product is delivered to the customer, it is essential that a trained technical

member of staff checks that the equipment is operating correctly in order to achieve

maximum performance.

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

1.1 Introduction

ISA employs materials of the best quality and as they enter the company, we constantly

monitor their storage and the use as part of the manufacturing process to prevent damage,

deterioration and failure. All manufacturing elements are designed and manufactured in order

to guarantee reliability and high safety standards. All equipment is subjected to a strict testing

procedure before delivery. However, please bear in mind that product performance over time

depends on correct use and adequate maintenance. This manual contains the necessary

instructions to maintain the equipment's initial appearance and functions over time.

Note

So as not to compromise equipment operation and safety, particularly complex installation and

maintenance operations are not described in this manual and are carried out by the manufacturer's

specialised technical personnel.

The Use and Maintenance Manual contains the necessary information for understanding

how the equipment works and how to use it properly, namely: the technical description

of the various operational units, equipment and safety systems, operations, how to use

the instruments and the interpretation of any diagnostics reports, main procedures and

information relating to routine maintenance. For correct use of the equipment, the working

environment should comply with current health and safety standards.

The safety requirements, indications, standards and notes illustrated in the various chapters

of this manual are aimed at establishing a code of conduct and a series of obligations to

be observed when performing the various activities, in order to create safe conditions for

personnel, the equipment and the surrounding environment. The safety standards reported

in this document are intended for trained, authorised personnel responsible for:

• Transport

• Installation

• Operation

• Management

• Maintenance

• Cleaning, decommissioning and disposal which are the only intended uses of this

equipment

Attention

Reading this manual, albeit in full, is no substitute for adequate user experience. therefore it should

only be considered a useful reminder of the technical features and the main operations to perform.

Warning

Installers and users are obliged to read and understand all the instructions contained in this document

before using the equipment.

1.2 Manufacturer's contact details

ISA S.r.l.

Via del Lavoro, 5

06083 - Bastia Umbra - Perugia - Italy

Tel. +39 075 80171

Fax +39 075 8000900

www.isaitaly.com

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

2. SAFETY

The buyer is responsible for training personnel using the appliance on the risks, safety devices

and general health and safety rules required by the laws of the country where the equipment is

installed.

Users/operators should be aware of the position of all the controls and how they work, as well as

of the features of the equipment.

They should also read this manual in its entirely.

Maintenance work should be conducted by qualiﬁed personnel after the equipment has been

prepared adequately.

Danger

Tampering with or unauthorised replacement of one or more parts of the equipment, applying ac-

cessories that modify its use and ﬁtting spare parts other than recommended ones may result in

accident risks.

Danger

Before doing any type of work, the equipment must always be disconnected from the power supply.

Any work on electric parts or cooling system components should only be carried out by

trained personnel in compliance with current laws.

2.1 Personnel training

The buyer is responsible for ensuring personnel who will use the equipment and

maintenance technical staff are instructed and trained adequately.

The manufacturer is available for advice, clariﬁcations, etc. so that the operator and

technical staff can use the equipment correctly.

Attention

The equipment is intended for professional use.

2.2 Safety devices applied

The Equipment is equipped with the following safety devices:

2.2.1 SAFETY DEVICES PRESENT

2.2.2 FIXED PROTECTIVE DEVICES

2.2.3 SECTIONING THE ELECTRICITY SUPPLY

2.2.1 Safety devices present

Devices which operation prevents risk situations in operation conditions verifying (e.g.

fuses, pressure switches, protective devices, circuit breakers, etc.).

2.2.2 Fixed protective devices

Fixed protective devices consist of ﬁxed perimeter shields, which are used to prevent

external parts from entering the equipment.

Danger

It is strictly forbidden to start up the equipment after maintenance work without reﬁtting the panelling

properly.

Attention

You should check the integrity of ﬁxed panels and corresponding ﬁxings to the frame, focusing in

particular on the protective panels.

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

2.2.3 Sectioning the electricity supply

Before conducting any maintenance work on the equipment or part of it, it is necessary to

section the power supply that powers it.

Danger

Please remember to fully disconnect the equipment from the power supply in the event of maintenance

work during which the operator cannot prevent any accidental closure of the circuit by other people.

2.3 Residual risks

During design the manufacturer examined all the areas or parts at risk. Therefore, all

necessary precautions have been taken to prevent risks to persons and damage

to the equipment as mentioned earlier.

Attention

Periodically check that all safety devices are operating correctly.

Do not remove the ﬁxed protective devices.

Do not introduce foreign objects or tools into the operational and working area.

Although the equipment is ﬁtted with the aforementioned safety devices, there are still

some risks that cannot be eliminated, but reduced via corrective actions by the ﬁnal

integrator and correct operational procedures.

Below is a summary of the remaining risks associated with the equipment during:

• Normal operation

• Adjustments and tweaking

• Maintenance

• Cleaning

2.3.1 Risk of contact with live parts

Risk of breaking or damaging the electrical components of the equipment, with a possible

reduction in safety levels, following a short circuit.

Before connecting the electricity supply, make sure there is no ongoing maintenance work.

Attention

Before making the connection, check that the d/c electricity at the point of installation is no higher than

the value indicated on the protective switches on the fuse box. if it is, the user is responsible for ﬁtting

the relevant limiting devices.

It is strictly forbidden to conduct any electrical modiﬁcation, in order to prevent additional unforeseen

hazards and risks.

2.3.2 Fire

Danger

In the event of a ﬁre, immediately disconnect the master switch from the main power supply line.

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

2.3.3 Explosive atmosphere

The equipment must not be located in an area classiﬁed as an explosion risk according to

1999/92/EC such as:

Zone 0

An area in which there is a permanent, long-lasting or frequently explosive atmosphere

made up of a mixture of air and ﬂammable substances in the form of gases, fumes or

steam.

Zone 1

An area in which the formation of an explosive atmosphere, made up of a mixture of air and

ﬂammable substances in the form of gases, fumes or steam is occasionally probable during

normal activities.

Zone 20

An area in which there is a permanent, long-lasting or frequently explosive atmosphere in

the form of clouds of combustible dust in the air.

Zone 21

An area in which the formation of an explosive atmosphere in the form of clouds of

combustible dust is occasionally probable during normal activities.

2.3.4 Slipping

Any leaks in the areas surrounding the equipment may cause personnel to slip.

Check that there are no leaks and keep these areas clean at all times.

2.3.5 Tripping

Generally untidy deposits of material may constitute a tripping hazard and a total or partial

obstruction of emergency exit routes.

You should ensure that operating and transit areas and emergency exit routes are free from

obstacles in compliance with current legislation.

2.3.6 Circuit faults

Owing to potential faults, safety circuits may become less effective, which results in lower

safety levels.

You should check the operational condition of the present safety devices regularly.

2.4 Warning signs (if any)

Owing to the presence of various residual risks identiﬁed, the equipment is ﬁtted with

hazard, warning and obligation signs devised in compliance with regulations relating to

graphical symbols for use on systems.

The signs are located in clearly visible positions.

Attention

It is strictly forbidden to remove the warning signs on the equipment.

The user is responsible for replacing warning signs that, owing to wear, become unreadable.

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

3. WASTE DISPOSAL

During normal operation, the equipment does not generate any environmental

contamination. At the end of its life cycle, or if it is necessary to proceed to permanent

decommissioning, we recommend following the procedures below:

DISPOSAL (User)

The symbol, applied to either the product or its packaging, indicates that the product should

not be considered as normal domestic waste, but should be taken to a waste collection point

for the recycling of electrical and electronic appliances. The correct disposal of this product

helps to prevent potential negative consequences that might derive from inadequate product

disposal. For detailed information about recycling this product, contact your council, your local

waste collection service or the store where you purchased the product.

END-OF-LIFE DISPOSAL AND RECYCLING PROCEDURES

FOR THE EQUIPMENT (Authorised Bodies)

1. Switch off the equipment and unplug the power supply cable.

2. Remove the lamps (if installed). These should be disposed of separately.

3. Remove the control boards and the electronic cards. These should be disposed of

separately.

4. Remove all the independent parts (grids, casings, proﬁles, etc.) and group them

according to shared features in order to access the heat exchangers, pipes, cables, etc.

and be careful not to damage the cooling circuit.

5. Remove all mobile parts (doors, sliding doors, glass parts, etc.) and group the various

materials according to their features.

6. Check the type of coolant on the label located inside the counter. Remove the coolant

and dispose of it through authorised services.

7. Disconnect the evaporator, condenser, compressor, pipes and fans. These are made of

copper, aluminium, steel and plastic and should therefore disposed of separately.

8. Once all the guardings and the various parts of the frame have been removed, separate

the various types of material they are made from (plastic, metal sheets, polyurethane,

copper, etc.) into groups according to their features.

All recyclable materials and waste should be processed and recycled by professionals, in

compliance with the laws of the country in question.

The company responsible for recycling the materials should be registered and certiﬁed as a

waste disposal service in accordance with the speciﬁc directives of the country in question.

Attention

Illegal disposal of the product by the owner will result in administrative sanctions as required by cur-

rent laws.

Disposal of the product should comply with current laws on the disposal of coolant liquids and mineral

oils.

Important

If there is no symbol representing a barred dustbin on the equipment, this means that the manu-

facturer is not responsible for taking care of the disposal of the product. In this case, again, current

waste disposal laws should be complied with.

Additional information

Further information on the disposal of liquid coolant, oils and other substances is available on the safety

data sheet corresponding to the substance itself.

METRO’

USE AND MAINTENANCE MANUAL

428000375237

PASTRY DISPLAY CABINETS

4. INSTALLATION

This manual provides information on how to unpack,

position and connect to the power supply.

4.1 Storage and unpacking

The equipment, with or without the packaging, should be carefully stored inside warehouses

or in areas away from the elements and direct sunlight, at a temperature between 0and

+40°C.

The equipment should only be moved by qualiﬁed personnel operating forklift trucks, the

power of which should be suited to handling the weight of the product: during this operation

the equipment MUST be placed on the special pallet supplied.

Unpack the equipment by removing the screws ﬁxing it to the pallet.

All packaging materials are recyclable and should be disposed of in accordance with local

regulations. Please destroy "plastic" bags to prevent them from becoming hazardous to

children (suffocation).

4.2 Installation, positioning and ambient conditions

Attention

There should be a good air ﬂow around the compressor and condensing unit. Therefore the area

around the unit should not be obstructed by boxes or other objects.

Position the equipment away from sources of heat (radiators, all types of ovens, etc.), and away from

draughts (generated for example by fans, air conditioning ducts, etc.).

Also avoid direct exposure to sunlight, or anything that causes the temperature inside the cabinet to

rise with detrimental results to unit operation and energy consumption. Do not use the equipment

outdoors and do not leave it exposed to rain.

4.3 Electrical connection

Attention

Check that the voltage indicated on the appliance is the same as the value on the appliance

identiﬁcation label and in the table provided in paragraph 2 of this manual, and check that the

required voltage is suitable.

Check on the socket that the power supply voltage provides rated voltage (±10%) when the

compressor is started.

The plug should be directly connected to the electrical socket. It is forbidden to connect the plug to

the socket by means of multiple socket extensions or adaptors.

The electrical system socket must be ﬁtted with a disconnecting device from the mains (rated for the

load and conform to current standards) to guarantee full disconnection in overloads category III (3)

and ensure protection of the circuits from earth faults, overloads and short circuits.

Do not route the electricity cable in passageways.

Attention

Earthing is necessary and mandatory by law.

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali ISA Merchandiser

ISA

ISA METRO 412100981000 Manuale utente

Manuali Merchandiser popolari di altre marche

FRIGOGLASS

FRIGOGLASS Flex 20 HC Manuale utente

Hussmann

Hussmann ENTYCE TY3 Manuale utente

EPTA

EPTA COSTAN RHINO MULTI Manuale utente

Hussmann

Hussmann CRFD Istruzioni operative

CASCO

CASCO Nano Cube Manuale utente

Hussmann

Hussmann WDCHI Manuale utente

True

True GDIM-26 Manuale utente

Structural Concepts

Structural Concepts Oasis Mobile Series Istruzioni per l'installazione

Hussmann

Hussmann Q2-SS Istruzioni operative originali

Haussmann

Haussmann RL Manuale utente

Howard McCray

Howard McCray R-CDS32E-4 Manuale utente

Hussmann

Hussmann microSC SHM-A Series Manuale utente

Hussmann

Hussmann APT0500 Manuale utente

EPTA

EPTA iarp Cool Emotions Delight Lite Manuale utente

VALERA

VALERA BC 85 Manuale utente

HL Display

HL Display 3eBin Manuale utente

Hussmann

Hussmann Q1-SS Manuale di istruzioni

Hussmann

Hussmann impact Excel C2X-XLEP Manuale di istruzioni