iSmartAlarm CubeOne Manuale utente
1
iSmartAlarmTM
iSmartAlarm Home Security System
OWNER’S MANUAL
Table of Contents
INTRODUCTION............................................................................................................................................................................................1
PACKAGE CONTENTS...................................................................................................................................................................................1
INTENDED USE……………………………………........................ ........................ ...............................………………………………………..…………..1
IMPORTANT NOTE FOR USERS……….…………….……………........................ ........................ ........................ ...................... ...................1
CONTRAINDICATION………………………………........................ ........................ ........................ ........................ ........................………………….2
PARTS AND DISPLAY INDICATORS…………........................ ........................ ........................ ........................ ........................…………………..…2
SOUND CONFIRMATION………………………........................ ........................ ........................ ........................ ...................…………………3
SETUP REQUIREMENTS………………………………........................ ........................ ........................ ........................ ..........................………………3
SETUP PROCEDURES…………………………………........................ ........................ ........................ ........................ ........................….…….……….3
SPECIFICATIONS…………………………………………………........................ ........................ ........................ ........................ .......................………5
GENERAL SAFETY AND PRECAUTIONS…………........................ ........................ ...................... .......................... ........................………...………7
TROUBLESHOOTING…………………………………………........................ ........................ ........................ ........................ .........................….……..8
CARE AND MAINTENANCE……………………………........................ ........................ ........................ ........................ ........................………………8
WARRANTY INFORMATION…………………………........................ ........................ ........................ ........................ ........................……………….8
EXPLANATION OF SYMBOLS…………………………........................ ........................ ........................ ........................ ........................…….……….8
INTRODUCTION
Thank you for purchasing the iSmartAlarm Home Security System. The iSmartAlarmTM allows you complete control over your home's security utilizing
your smartphone.
This manual will guide you through the set up procedures and highlight the Security System’s key features. Please keep it handy for future reference.
PACKAGE CONTENTS
1 CubeOne™
2 Contact Sensors
1 Motion Sensor
2 Remote tags
1 Power adapters
1 Network cable
Accessories
Window Decals
Installation guide
Owner’s Manual
Note: please refer to the packing list for exact content in each specific package.
INTENDED USE
With the CubeOne™managing motion detectors, door and window protection, remote control and panic features, as well as optional iCameraTM and
additional devices, you can be assured your property and family are safe utilizing your smartphone.
IMPORTANT NOTES FOR USERS
The iSmartAlarm system doesn’t offer guaranteed protection against burglary or other emergency.
iSmartAlarm system is Do-It-Yourself (DIY) product.
iSmartAlarm system does not come with traditional monitoring service.
2
iSmartAlarm users should continue to act prudently in protecting themselves and ensuring their lives and property. Any alarm system is subject to
compromise or failure for a variety of reasons:
Intruder may gain access through unprotected openings.
Intruder may have the technical sophistication to bypass a sensor or whole system.
Signals sent by CubeOne or devices may be blocked or reflected before being received, and block can occur if metal objects are
moved into the path of the signal.
Motion sensors can only detect the intrusion within the designed ranges and unobstructed areas.
Malfunction of routers, limited services by wireless phone carriers, limited speed of high-speed internet by ISP, limited service such
as iMessage, push notification provided by smartphone maker(s).
The iSmartAlarm system, like any electrical system, is subject to component failures.
CONTRAINDICATION
Use appropriate caution if you use this product in combination with medical electronic devices such as:
(1) Medical electronic implants such a space makers.
(2) Electronic life support systems such as artificial heart/lungs.
(3) Portable electronic medical devices such as electrocardiographs.
This product could cause these devices to malfunction posing a considerable health risk to users of these devices .Contact sensors include parts
with strong magnetic force
（4）Use caution when utilizing/testing siren volume. Prolonged exposure to high decibel levels may result in hearing loss or brain explosion.
（5）Opening or tampering with case to expose internal electronics could result in shock, leading to injury or death
PARTS AND DISPLAY INDICATORS
CubeOne™:
Ports connection as below.
3
10/100 BASE-T Ethernet :for connecting to router
Power: for connecting to power adaptor
USB: a port for future function expansion (not for connecting to computer directly)
LED statuses of CubeOne™
1. Booting: LED stays solid red
2. Normal working status: LED flashes white ,“breathing” when siren is off; LED flash red when siren is on
3. Disarming: LED switch from flash red to white “breathing” when disarming
4. Registration: LED alternates between red and white during registration
Motion sensor:
How to change battery:
1. Unscrew and take off the back lid
2. Replace the three AA batteries as below.
4
Remote tag:
How to change battery:
1. Unscrew and take off the back lid
2. Replace the button battery with same type - CR2032
Contact sensor:
How to change battery:
1. Take off the battery compartment
5
2. Replace the button battery with same type - CR2032
LED statuses of contact sensors, motion sensors and remote tags
1. Device has been added to the network successfully: LED flashes red twice
2. Devices are working normal: LED is off
3. Sensor has been triggered: LED flashed red once
4. Low battery: flash 3 times continuously within 3 seconds
5. Communication error: LED stays solid red and white “breathing”
Sound confirmations
1. Siren stays on when the system is set off or the Siren button is clicked twice (in quick succession) on either App or Remote Tag
2. Arm/Home: 1 “bing” confirmation
3. Disarm: 2 “bing” confirmations
SETUP REQUIREMENTS
The iSmartAlarm Home Security System is designed to be used with the following iPhone models:
iPhone5
iPhone 4S
iPhone 4
iPhone 3GS
The iOS version of these devices should be 5.0 or higher.
SETUP PROCEDURES
DOWNLOAD THE FREE iSmartAlarm APP
6
Prior to first use, download the “iSmartAlarm Home Security System ” from your phone’s App store .Use keyword search term “iSmartAlarm
Security System”
It is very important that every iSmartAlarm user follows the on-screen instructions to register and complete a personal profile. Once you have
completed the iSmartAlarm App on-screen instructions on your iPhone, and completed the following setup instructions, your iSmartAlarm Home
Security System is ready to use!
PREPARING FOR SET UP
Make sure your:
iOS device is compatible and is version 5.0 or higher.
Make sure the iPhone, CubeOneTM and iCameraTM(optional)are connected to the same Wi-Fi network.
Internet connection provided by a Wi-Fi router is compatible with Wi-Fi IEEE 802.11 b/g standard.
OPERATING SET UP INSTRUCTIONS
STEP 1:
Connect the CubeOneTM to your router according to the picture provided below.
Plug the CubeOneTM into a wall outlet using the included power adapter.
Power on the CubeOneTM and wait for the booting process to finish (it will automatically boot, and should take 1-2 minutes). You will know the
booting process is finished when the CubeOne's white LED lights "breathe" (flash slowly).
7
STEP 2:
Remove the insulation tag from the battery compartment of contact sensors, remote tags, and motion sensor.
Place each of the devices in appropriate locations (see examples below).
STEP 3:
Download the “iSmartAlarm Home Security System” from your phone’s App Store.
Follow the App instructions for activating the system .Once you have completed the iSmartAlarm App on-screen instructions on your iPhone, ensure
that all sensors and remote tags are registered and show up correctly in the App.
Additional Devices: Additional sensors can be added to the iSmartAlarm home security at any time by going to Device Setting of App, and then
following the prompted steps. Make certain that the new sensor/device has been correctly powered on prior to scanning.
APP –BASIC WALKTHROUGH
Upon download and installation of App on your phone, you will be required to complete some basic necessary steps to begin using your iSmartAlarm.
The basic overview of steps are as follow:
1. Sign up, following prompts, with accurate information. Please ensure that you provide your phone number which will be used as the alert
phone number when the system is set off
8
2. Login to the iSmartAlarm App using the credentials you established during the sign up process
3. Follow the prompts to scan for devices. This will complete registration of the devices to your CubeOne
9
4.Once this registration is complete, you will receive a phone call during the sign up process –This is an automated voice, intended to confirm the
phone number you have submitted is correct. Please answer call, listen to message, and hang up. You may proceed once you have confirmed the
phone call was received correctly.
APP SCREEN LEGEND
This is your primary page for control of your iSmartAlarm. You can arm or disarm the system, set the system to “Home” setting (all
devices on except motion detector), or set off the Panic siren with 2 taps on the icon.
Here, you can view all members added to your network along with their status (home or away)
10
You can view the status of all devices
View streaming video through your optional iCamera –pan, tilt, and take snapshots and automatically upload to the cloud
Altri manuali per CubeOne
2
Indice
Altri manuali iSmartAlarm Sistema di sicurezza
iSmartAlarm
iSmartAlarm CubeOne Manuale utente
iSmartAlarm
iSmartAlarm iCamera Istruzioni operative e di manutenzione
iSmartAlarm
iSmartAlarm isaisa3 Manuale utente
iSmartAlarm
iSmartAlarm CubeOne Manuale utente
iSmartAlarm
iSmartAlarm Home Security System Manuale utente
iSmartAlarm
iSmartAlarm Home Security System Manuale utente
Manuali Sistema di sicurezza popolari di altre marche
EDM
EDM Solution 6+6 Wireless-AE Manuale utente
Highway Safety Group
Highway Safety Group EA401 Manuale utente
Siren
Siren LED GSM Manuale utente
Detection Systems
Detection Systems 7090i Istruzioni per il montaggio
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuale utente
Siemens
Siemens FDM273 Manuale utente