ITI Simon 2 Manuale utente

Simon Version 2 Quick Guide

https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]

Simon Version 2 Quick Guide

For a detailed review of the entire system, please view the Simon Version 2 manual.

« Help Center

Arm &

Disarm the

System

Battery Bypass

Protected

Areas

Date &

Time

Settings

Chimes &

Beeps

Reset Security

Codes

Trouble

Conditions

Volume

Arm and Disarm

Arm:

To arm all sensors in STAY mode when you are not leaving the premises, press the [Doors &

Windows] button once.

To arm all sensors in AWAY mode when you are leaving the premises, press the [Doors &

Windows] and the [Arm Motion Sensors] buttons once.

Disarm:

Select

Simon Version 2 Quick Guide

https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]

To disarm, press the [Disarm] button once + your [security code].

For more information on this topic please visit the complete Simon Version 2 manual.

Battery

The Simon Version21 operates on the 7.2V Battery Pack.

Loss of AC power and use of backup battery power is indicated by No AC.

A low battery condition is indicated by Low Bat.

For instructions on replacing your battery, please go to the Battery Replacement Page for this battery.

Bypass Protected Areas

Bypassing a zone allows you to arm your system with certain protected areas intentionally unarmed or to

access a protected area when the system is armed.

To bypass a zone, open the door or window you want to bypass and keep it open during the

arming process.

Press the [Arm Doors & Windows] button. The system will announce that a sensor is open. Press

the [Arm Doors & Windows] button again to bypass those zones left open.

To unbypass, press [DISARM] + [security code].

For more information on this topic please visit the complete Simon Version 2 manual.

Change Date and Time

To change the date and time settings:

Enter your [security code].

Select [CLOCK SET] from the Start menu.

To change the clock settings, press and hold the [Hours] button.

Use the [+] and [-] keys to find and select the desired hour.

Use the [+] and [-] keys to find and select the desired minutes.

Press the [Done] button to set the time and exit the menu.

Chimes and Beeps

When your system is in chime mode, a chime alert will sound three tones whenever a protected

door/window is opened.

Simon Version 2 Quick Guide

https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]

To turn chime mode on and off, press the [CHIME Doors] button.

To turn voice chime on enter your [Access Code].

Select [Add] from the Start menu.

Select [Option #].

Select option [41], then select [Done] to turn the voice chime on.

The turn voice chime off, enter your [Access Code].

Select [Option #].

Select [Delete] from the Status menu.

Select option [41], then select [Done] to turn the voice chime off.

For more information on this topic please visit the complete Simon Version 2 manual.

Reset

To clear the display after an alarm event, press the [DISARM] button twice.

Security Codes

You can program up to 5 users. All additional users can arm and disarm the system, but cannot access

certain programming functions.

To add a new user, enter the [Master code] and select [Add] from the Start menu.

Select [Access Code] from the Main menu.

When the system prompts the user to change the Master Code, select [Access Code] to access

secondary user codes.

When the desired access code is announced, select [DONE].

Enter the new user’s 4 digit code.

To continue adding codes, select [Access Code].

To finish, close the keypad cover.

To delete a user, enter the [Master Code].

Select [Delete] from the Start menu.

Select [Access Code] from the Main menu.

When the system prompts the user to change the Master Code, select [Access Code] to access

secondary user codes.

When the desired access code is announced, select [DONE].

You may be required to enter to re-enter the Master Code.

To finish, close the keypad cover.

For more information on this topic please visit the complete Simon Version 2 manual.

Simon Version 2 Quick Guide

https://alpha.adt.com/help/38.html[11/8/2018 11:50:02 PM]

Return to Top

Trouble Conditions

Your security system is able to automatically test itself for power failures, low batteries, nonworking

sensors, and communication troubles with the central monitoring station. When your security system

detects a trouble condition, six rapid beeps will sound every minute for four hours until the trouble

condition is corrected.

To silence trouble beeps, press [STATUS] or arm/disarm the system.

For a complete list of Trouble Conditions, please refer to the Simon XT Troubleshooting page.

Volume

The speaker volume can be adjusted. To adjust the speaker volume:

Enter your [Access Code].

Select [Add] from the Start menu.

Select [Option #].

Select option [42] and follow the voice prompts to set the volume to high or low.

For more information on this topic please visit the complete Simon Version 2 manual.

How can we help?

Search

Altri manuali per Simon 2

1

Indice

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente