ITRON 6049-0662 Manuale utente
Smart Video
Doorbell with AI
User Instructions
Packing list
2. Indoor Chime *1
3. Mounting Brackets (Optional) *2
4. USB Power Cord *2
5. Screw Pack *1
6. Removal Pin*1
7. Doorbell Installation Wire (optional)*2
8. Wiring Cap (optional)*1
9. User Instructions *1
1. Doorbell *1
Lens
Product Appearance
iTronBELL
Microphone
Human
bodyinfrared
sensor
Infrared light
Doorbell
button Indicator light
Speaker
Removal hole
Micro-USB
port
Power button
Micro-SD
card slot
Reboot hole
Exploded views
Back cover off
Left & Right with
IndoorChime
Speaker
Indicator
light
Volume
reduction
key
Pairing
key
Volume
plus Key
Pairing
selection
key
Micro-USB port
Getting Started
The smart iTronBELL supports both wireless
battery power supply and wired power supply.
Downloading and installing
the App
The iTronBELL can be connected to and
operated through smart phones running on Android
and iOS platforms. For best experience, please
scan the QR code below, download and install the App
and follow the prompts to complete user registration.
Adding the iTronBELL
Login to the App and follow the prompts to connect
the Wi-Fi and add the doorbell (please keep the
doorbell close to the router when it is configured).
Auxiliary installation tools
Phillips head screwdriver *1
Electric drill 1/4" *1 (drill bit 6.35 mm)
How the iTronBELL works
The unpacked doorbell comes in two parts: a doorbell
to be affixed to the porch, powered by the built-in
battery, and an indoor door chime unit placed in your home
powered by USB power socket (Not Included),iTronBell
The doorbell supports connecting some of mechanical
“Ding Dong” chimes.
Future Supported Function
Alexa and Google Home
charged by USB, connected to an indoor USB power
socket. (Not Included)
How to remove the iTronBELL
When you need to dismantle the iTronBELL from the
bracket, please use the removal pin to press and insert
the removal hole at the top of the iTronBELL, and then
take out the doorbell from the back to the front. The
version with electronic tamper will trigger a 10s
tamper alarm when it is removed, and you can turn it
off to cancel the alarm via the App or by long pressing
the power button.
Notes
The iTronBELL is divided into versions with and without
electronic tamper. After purchasing the product, you
can distinguish it by observing whether there is a
circular magnet on the flat bracket; if there is a
magnet, it means that it has an electronic
tamper-proof function, and if there is no magnet, it
does not have an electronic tamper-proof function;
Choosing a suitable location
You can mount the video iTronBELL on the side wall of a
porch or door, or on wooden walls and doors.
After the indoor unit is powered on and paired, it
should be placed near a socket that is convenient for
power supply. It is necessary to ensure that the device
is unobstructed and can be covered by wireless signal.
（1）Selecting a suitable installation location
Please install the iTronBELL in an environment with
an unobstructed view and within the coverage
area of the WiFi signal.
Please adjust the position appropriately based on the
specific situation of your home (it is recommended to
install it on the flat wall vertical to the door side at a
height of 1.2m-1.5m（48 inch-59 inch）. Leave a
distance of 100 mm at the top to provide sufficient
space for removal tools)
Factors to consider
①Check if you can reuse the existing screw holes and
expansion bolts on the walls and door frames.
②It is recommended that the installation height is
1.2m（48inch) above the ground when you drill the
mounting holes for the first time.
③If you want to install the iTronBELL on a wooden wall
or door, you can mount the bracket directly with
screws instead of drilling holes with a drill first.
④If your wall is made of cement, bricks or concrete,
you can mark out the screw hole position first, then
drill a hole with a 1/4" (6.35 mm) bit, put in the
expansion plug, and secure the bracket with screws.
Special Tips
①The iTronBELL, indoor unit and router need to be as close
as possible (to avoid networking failure due to
distance)
②The recommended installation height of the iTronBELL
is 1.2m-1.5m（48 inch-59 inch） (installation out of the
range may compromise performance)
③It should be installed on non-metallic porches and
walls (to avoid signal shielding) or affixed to the wall
on the door side.
（2）Selecting an installation scenario
The iTronBELL can be installed with or without iTronBELL
wire. You may choose the installation method
according to the situation in your home;
（3）Selecting an installation method
You can use the included 3M adhesive to fix the
doorbell, but please ensure that the surface is clean
and smooth. First tear off the red sticker on the
bottom of 3M adhesive, stick it on the back of the
bracket, and then stick the bracket to the installation
position you choose. After sticking, press hard to
ensure that the paste is firm. To install the doorbell on
a rough surface (e.g.: cement wall, brick wall,
concrete, and wooden door), screws are recommend-
ed to fix the iTronBELL first.
Indice
Altri manuali ITRON Accessori
