J5 create JUA210 Manuale utente

USB DISPLAY ADAPTER

QUICK INSTALLATION GUIDE

GUÍA DE INSTALACIÓN RÁPIDA

KURZANLEITUNG FÜR INSTALLATION

GUIDE D'INSTALLATION RAPIDE

クイックインストールガイド

快速安裝

JUA210 / JUA230 / JUA250

USB DISPLAY ADAPTER

QUICK INSTALLATION GUIDE

JUA210 / JUA230 / JUA250

GETTING STARTED

Installation on Windows

1. Insert the Driver CD into the drive; the setup program

should launch automatically.

 • Make sure that the USB Display Adapter is NOT

connected to your host computer.

2. Executing the Setup.exe application will launch the

following screen. Click “Next” to continue.

*Driver download is available at www.j5create.com

in “support > download” area.

Installation on MAC (Snow Leopard)

3. When the installation is complete, select “Yes, I want

to restart my computer now” and click “Finish” to

restart.

1. Insert the Driver CD into the CD-ROM drive and run

the .dmg file to draw drivers.

 • Make sure that the USB Display Adapter is NOT

connected to your host computer.

*Driver download is available at www.j5create.com

in “support > download” area.

2. Click “Continue” to proceed 3. Type your password then click “OK”.

It will take few minutes to process.

4. Click “Restart” to complete

DEVICE HARDWARE INSTALLATION

1. After the computer has rebooted, connect the external display device to the VGA/DVI/HDMI connector of the

USB Display Adapter.

2. Connect the USB Display Adapter into a USB 2.0 port on the host computer.

3. Software processing will take a few minutes. After the software processing is complete you will be ready to use the

USB Display Adapter.

*Multi-USB Display Adapter Installation

If you are going to install more USB Display Adapters, please repeat the hardware installation and then reboot the

computer.

DISPLAY FUNCTION INSTRUCTIONS

Display Resolution

Select the resolution you want on the display device.

Display Orientation

Turn the connected display device

* This function is not avaiable on MAC

Display Mode

Extended mode

Mirror mode

Primary mode

Display Setting on Windows 7 Display Setting on Windows Vista/XP

Right click on the desktop and go to “Screen Resolution” Right click on the icon ( ) on the lower right-hand side

of the toolbar.

Display Setting on MAC (Snow Leopard).

Go to ( ) and then “System Preferences”.

Choose the “Display” or “Arrangement” tab to adjust.

For complete instructions on Functions please refer to the

User Manual.

Required Environment

 • MicrosoftWindows7,Vista,XP(32-bitor64-bit)

 • MacOSXv10.6(SnowLeopard)/v10.7(Lion)

 • AvailableUSB2.0port

 • MinimumSystemRequirements

QTY 1~2 Dongles 3~4 Dongles

CPU IntelDualcore1.8GHzorabove IntelQuadcore2.4GHzorabove

RAM 2GBorHigher 4GBorHigher

USB IndependentpowersupplywasrequiredwhenusingtheUSBHUBtoconnectmultipledongles.

 • Thisdeviceisprioritizedfor‘OfficeApplication’notfor‘HomeEntertainment’,onlyonemonitorforfullscreenDVD

  playbackisrecommended.

Package Contents

 • USBDisplayAdapter

 • DriverCDwithE-Manual

 • QuickInstallationGuide

Regulatory Compliance

 • FCC/CE/C-Tick/VCCI

Disclaimer

Informationinthisdocumentissubjecttochangewithoutnotice.Themanufacturerdoesnotmakeanyrepresentationsorwarranties(impliedorotherwise)regarding

theaccuracyandcompletenessofthisdocumentandshallinnoeventbeliableforanylossofprofitoranycommercialdamage,includingbutnotlimitedtospecial,

incidental,consequential,orotherdamage.Nopartofthisdocumentmaybereproducedortransmittedinanyformbyanymeans,electronicormechanical,including

photocopying,recordingorinformationrecordingandretrievalsystemswithouttheexpressedwrittenpermissionofthemanufacturer.