Jacob Jensen IP60W Manuale utente
Telephone IP60W
User Manual
2
CONTENTS
4. 5.
The following items are included in the package
of JACOB JENSEN Telephone IP60W F:
1. Telephone handset
2. Base station
3. Handset coiled cord
4. Table stand
5. Line cord
1. 2. 3.
3
MAIN FEATURE LIST
1. IP60W F is 1 Line Corded VOIP with Display
2. Supports SIP V2/SDP/RTP/RTCP/STUN/SNTP/ DNS/SNMPv2
protocols.
3. Supports IEEE802.1 Q standard, IEEE802.3af protocols.
4. Supports G.711/G.722(HD Voice)/G.723/G.729AB /G.726/
iLBC
5. Hold, Flash, Redial and Speaker feature
6. Message waiting light compatible with main PBX, MWL
indicator and withdraw feature
7. Owns Four (4) service keys and Four (4) soft keys
8. Supports DHCP and static IP address protocol for getting
IP address.
9. Supports upgrade through HTTP/TFTP protocol.
10. Adopts dynamic speech detection; Comfortable noise
generation; Speech buffering technologies.
11. Integrated PoE power supply and external POE adapter
power supply.
4
CONTROLS AND FUNCTIONAL KEYS
1. Soft Keys
2. MENU Key
3. Key
4. Number Keys
5. Handset
6. Service keys
7. FLASH Key
8. Indicator Light
9. REDIAL Key
10. Speaker
5
10. MWL
11. Speaker
12. Key
13. HOLD Key
14. LAN Port
15. WAN Port
16. DC Jack
17. Handset Cord
6
CONGRATULATIONS ON YOUR NEW JACOB JENSEN™
TELEPHONE
The telephone is designed in Denmark by Jacob Jensen,
whose products have gained international recognition for
their original, simple and classic design. Jacob Jensen has
received about 100 prizes from around the world and has
19 products included in The Design Study Collection and
The Design Collection of The Museum of Modern Art in
New York.
The IP60 has been designed specifically for hotel use. Voice
over IP technology is employed for clear sound and reliable
operation. SIP protocols ensure compatibility with all major
brands.
Installation
1. Please connect the phone handset cord
2. Power by POE: Connect the output end to the WAN
port of the phone and connect the input end to the
Internet cable from hotel switch POE port.
3. Power by adaptor (The default is POE)
Please connect the 9V power adapter to the DC power
input, which is in the rear of the phone; connect the
Internet cable to WAN port of the phone, and connect
the Internet cable to the LAN port of Data port/access
point.
4. Please install the phone in a dry and clean environment
and avoid contact with damp.
5. The telephone should not come in to contact with fire,
water spray, or shock. Clean the surface with a soft
damp cloth; never use chemical solvents.
CONFIGURE THE PHONE THROUGH WEB INTERFACE
1. IP address
In off-hook mode, press HOLD button, the display will show
the IP address, which will disappear in 3s.
2. Launch WEB interface
Input the obtained IP address to launch WEB interface
. Type in user and password to log in
WEB interface.
Note:
1) Both the user name and password in initial management
mode are ‘admin’.
2) The default network mode is DHCP. Once the phone is
connected into the network environment with DHCP
service, it can get online automatically
3. WEB interface function description
3.1 Phone status
Product Information It shows the basic information of
the product.
Line Status It shows the registration state of
each line.
Network Status It shows the information of Internet
Port WIFI and PC port.
Wireless Info It shows the current WIFI setting
and status.
System Status It shows the current time and the
running time of the product.
http: //xxx.xxx.xxx.xxx
7
3.3 SIP Account Setting
For normal phone usage, only the Proxy Server, Display
Name , Phone Number, Account, and Password needs to be
configured.
Basic Set basic information from VoIP
service supplier，like phone number,
account, password, SIP proxy, etc.
Audio Configuration Select audio format
Supplementary
Service Subscription
Auxiliary function
Call Waiting Enable call waiting or not
Hot Line Set hot line
MWI Enable Enable MWI or not
Voice Mailbox
Numbers
Voice Mailbox server
MWI Subscribe
Enable
Support MWI subscription
3.4 Telephone feature
Handset Input Gain Set the inputting volume of the
handset MIC
Handset Volume Set the receiving volume of the
handset
Speakerphone Input
Gain
Set the inputting volume of the
speaker MIC
Speaker Volume Set the receiving volume of the
speaker
Ringer Volume Set the ringing volume
Speakerphone Mic
Boost
Magnify the speaker mic to 20db
or not.
Tone Type Set the tone type
Ringing Time
(10-300 sec)
Set the ringing time
All Forward Forward all telephone call
Busy Forward Busy forward
No Answer Forward No Answer Forward
DND DND
3.2 Network status
Telephone can obtain IP address from DHCP server in default
mode. Enter WEB interface to configure all related settings
in accordance with real network environment.
WAN IP Mode Select WAN port IP address
obtainment modes including static/
DHCP/ PPPoE/ Bridge.
MAC Address Clone Enable MAC address clone or not
NAT Enable Activate NAT function or not.
VLAN Mode Activate VLAN mode or not
VLAN ID Set VLAN ID
DNS Mode If DNS mode is Manual, user needs
to set primary DNS and secondary
DNS manually. If DNS mode is Auto,
IP phone will obtain primary DNS
and secondary DNS from DHCP
server automatically.
Primary DNS The Primary DNS setting
Secondary DNS The optional DNS setting
IP Address The network port IP address
Subnet Mask The network port subnet mask
Default Gateway The network port default gateway
Note:
1) When telephone IP address is switched from DHCP to
static mode, all parameters such as IP address, Subnet
Mask, Default Gateway and DNS need to be set manually.
2) Save and apply switched IP address settings and reboot
the phone for new IP address obtainment. Make sure the
network is normal during daily use.
8
3.5 Set Service keys
Enter the Service keys Setting interface, input the telephone
number for each service key, then save and reboot the
phone.
3.6 Administration
Client can set password, languages, restore factory
defaults,etc
3.7 Upgrade
Local Upgrade Click “Browse” to select certain
firmware, click Upgrade button for
upgrading. After upgrade, phone
will return to initial interface.
Note:
After upgrading, please restore factory settings.
4. WEB Operation
Except regular configuration, please do not modify other
corresponding information.
9
CALLER ID FEATURE
On-hook status, press MENU key to set some features.
1. Phonebook Used to store telephone number
2. Multi-Function
Key
User to store service keys’
telephone number
3. Call History Call history
4. Text Message Text Message
5. Black List Black List
6. Preferences Set the language, call waiting, etc.
7. Ring Tone Set ring tone
8. Volume Set Volume
9. Accounts Set account and server info, etc.
10. Call Forward Set call forward
11. Time/Date Set time and date
12. Voice Mail Voice mail
13. Network Set IP type, address, gateway, etc
14. Wireless Set wireless
15. Product Info Product information
16. Status Status of the internet and the
telephone registration
17. Reboot Reboot the phone
18. Factory Reset Factory Reset
19. Set Password Set Password
20. LCD Contrast Set LCD Contrast
21. Login/logout Login/logout
Note:
The default password is admin.
10
BASIC OPERATION OF PHONE
1. Receiving a call
Pick up the handset or press button.
2. Making a call
Pick up the handset or press button, then dial the
telephone number.
3. Adjust ringer volume
Press and to low or increase the ringer volume. There
are three levels. Put back the handset, the ringer will return
to low level.
4. To redial the last number dialed
Press REDIAL key to dial the last number dialed but after
five minutes the number will disappear automatically.
5. Service key
Off-hook status, press certain service key can directly dial the
stored telephone number.
Two ways to program the service key
1) Enter MENU interface, press 2-input password (default
is admin) + Basic Board Speed Dial Auto (choose certain
service key), + desired number + OK, then choose Line 1
or Line 2.
After programming all the service buttons, please reboot
the phone.
2) Find the service button from the web config interface,
then input the desired number and reboot the phone.
6. MWL
The Indicator will flash if there is a call or message, press the
key to retrieve the message.
7. WiFi Connection Function (Only Adaptor Series support
this function)
1) Enter the web interface and connect the wireless
network: Choose the network from Wireless-Repeater,
then click Connect and input the password, click OK
to save the setting. Disconnect the internet cable and
connect the power adaptor.
2) Use the MENU to connect the wireless network: Off-
hook status, press MENU, choose the network from
Wireless-Wireless Connection, then click link to connect
the network and input the password. Click OK, then
disconnect the internet cable and connect the power
adaptor.
8. AP function
8.1 Enter the WEB interface, find the Network-> NAT
Enable and select Enable, press save and apply.
8.2 Choose 1_MANAGEMENT_VOICE_INTERNET_R_VID
from Network-Connect Name, then choose Port_1 and
Wireless(SSID) from Port Bind, click save and apply.
8.3 Browse to Wireless-> Basic-> Wireless Connection
Mode and select the AP, then configure the SSID name
in the Multiple SSID option, and make sure the ENABLE
is checked, then press save and apply.
8.4 Input the wireless network’s password from Wireless-
Wireless Security-Pass Phrase and save & apply.
8.5 Reboot the phone.( When AP is in use, the WIFI connect
feature isn’t available)
Indice
Altri manuali Jacob Jensen Telefono
Jacob Jensen
Jacob Jensen 80 Manuale utente
Jacob Jensen
Jacob Jensen Telephone 3 Manuale utente
Jacob Jensen
Jacob Jensen Telephone HT20D Manuale utente
Jacob Jensen
Jacob Jensen HT20 Manuale utente
Jacob Jensen
Jacob Jensen HT60 Manuale utente
Jacob Jensen
Jacob Jensen HT60 Manuale utente
Jacob Jensen
Jacob Jensen HT60D Manuale utente
Jacob Jensen
Jacob Jensen Telephone 1 Manuale utente
Jacob Jensen
Jacob Jensen T520 Manuale utente
Jacob Jensen
Jacob Jensen IP20 Manuale utente
