Jasco 45246 Manuale utente

www.jascoproducts.com

1-800-654-8483

Home Monitoring

Wireless

Color Camera

and Receiver

User Manual

45246

Indoor | Outdoor

Table of Contents

Product Features .................................................................... 3

Package Contents .................................................................. 4

Before you Install .................................................................... 4

Choosing A Camera Mounting Location ..................... 5

Receiver Channel Selection ............................................... 7

Manual Mode ........................................................................... 7

Auto Mode (two camera operation) .............................. 8

Cycle Time Setting (Time Interval between

camera selections) .......................................................... 9

Camera Channel Selection ................................................ 9

Connecting to a TV or Monitor .......................................11

Using the Wireless Color Camera System

with a VCR or DVR ..........................................................13

Long Range Night Vision ..................................................13

Auto Detection and Notiﬁcation Feature .................14

Camera Installation.............................................................14

Troubleshooting ....................................................................19

Speciﬁcations .........................................................................21

Warranty ..................................................................................22

FCC Statement .......................................................................23

Thank you for purchasing the GE 45246 Wireless

Color Camera System with Receiver. Please review

these instructions carefully before attempting to

operate the unit.

PRODUCT FEATURES

• Weather resistant metal camera casing,

designed for outdoor use

• Black anodized ﬁnish prevents rust and

unwanted reﬂections

• Long Range Night Vision — high-powered LED’s

allow you to see up to 60ft. in the dark

• Vandal resistant bracket hides cable

• Adjustable sun shield to minimize glare

• “Wi-Fi” internet friendly wireless system—

won’t interfere with home wireless networks.

• Wirelessly transmits audio and video up to

200 ft. (unobstructed line of sight).

• View up to two cameras

• Audio Detection & Notiﬁcation feature—alerts

when sound is detected in a monitored area

• Multi-axis camera mount allows for installation

at any angle

• Receiver connects to any TV or monitor with

AV inputs

PACKAGE CONTENTS

Please check and identify all the parts before

proceeding with the installation.

1. Wireless camera and receiver

2. Mounting hardware for camera (3 screws,

3 plastic anchors)

3. 2 AC adapters

4. AV cable

5. Adjustment wrench

BEFORE YOU INSTALL

When choosing the best location for the placement

of the camera and receiver, it is best to avoid any

sources of possible RF interference such as

microwave ovens and cordless phones. Proximity

to these and other sources of RF interference can

inhibit the proper functioning of the receiver.

The 900MHz video signals pass easily through

your home’s interior walls, but the signal may be

reﬂected by power wires or plumbing inside those

walls. Usually a slight adjustment to the position

of the Receiver and/or Camera antenna will

improve reception. Position the antenna upwards

or downwards (depending on mounting location)

to improve sensitivity. Take care not to force the

antenna past its lock positions.

CHOOSING A CAMERA MOUNTING LOCATION

The Wireless Color Camera is suitable for indoor or

outdoor use. When choosing a mounting location,

please be advised:

• This camera is designed to be reliable for

outdoor use; and its ﬂexible design allows it to be

used indoors as well.

• If using outdoors, take time to ﬁrst consider

how you will route the cable back to the power

adapter. The AC adapter must be used in

a dry location. The cable is routed through

the mounting bracket so it can run hidden

through walls. This provides a vandal-resistant

design. There is also a slot located at the base

of the mounting plate so the cable can exit

the mounting bracket and run on the outdoor

surface, if desired.

• The universal multi-axis bracket allows you to

mount the camera at almost any angle.

• DO NOT position the camera so that it points

directly into the sun or any bright light, as this

may cause damage to the camera.

• Avoid positioning the camera so that it is viewing

areas where half of the area is in bright sunlight

and the other half is dark, such as the shadow

of a building. All types of cameras have difﬁculty

“seeing” into areas of such divergent light levels.

• In low light conditions, the camera will

automatically activate its high-powered Infrared

(IR) LED’s and switch the camera to Long Range

Night Vision mode. Long Range Night Vision

viewing distance can be up to 60ft, and will be

viewed in B/W.

• The included AC adapters must be positioned

no farther than 8’ from an AC outlet. Do not use

either supplied adapter outside. If you need to

extend an AC adapter cable, 12 ft. extensions

are available by contacting Technical Support at

800-654-8483.

• The Camera has an unobstructed wireless

transmission range up to 200 ft. from the

receiver. Transmission distance indoors is

reduced due to interior walls, wiring, household

ﬁxtures and metal plumbing.

RECEIVER CHANNEL SELECTION

The receiver system can monitor up to 2 wireless

cameras. You can operate the receiver in either

Manual or Auto mode. To view more than one

camera, locate the camera channel selection

switch (1 2 1/2) on the rear panel of the

receiver.

The receiver must be set to the ‘1/2’ position to

allow two cameras to be monitored. The next step

will be to set the channel selection switch on both

cameras. See Camera Channel Selection.

MANUAL MODE

Operating the receiver in

manual mode allows you

to manually select a single

camera/channel to monitor

exclusively. The system will

remain on the selected

channel indeﬁnitely until the

other channel is selected. To select one of the two

channels (cameras) manually, locate the AUTO

and MANUAL buttons on the top of the receiver.

Press and release the MANUAL button. The red LED

labeled ‘A — M’ will turn on and the corresponding

Auto

Manual

Channel

Selection

switch

RECEIVER CHANNEL SELECTION

The receiver system can monitor up to 2 wireless

cameras. You can operate the receiver in either

Manual or Auto mode. To view more than one

camera, locate the camera channel selection

switch (1 2 1/2) on the rear panel of the

receiver.

The receiver must be set to the ‘1/2’ position to

allow two cameras to be monitored. The next step

will be to set the channel selection switch on both

cameras. See Camera Channel Selection.

MANUAL MODE

Operating the receiver in

manual mode allows you

to manually select a single

camera/channel to monitor

exclusively. The system will

remain on the selected

channel indeﬁnitely until the

other channel is selected. To select one of the two

channels (cameras) manually, locate the AUTO

and MANUAL buttons on the top of the receiver.

Press and release the MANUAL button. The red LED

labeled ‘A — M’ will turn on and the corresponding

Auto

Manual

Channel

Selection

switch

channel (1 or 2) LED will turn on. The receiver

will switch to a different channel each time the

MANUAL button is pressed. The video image for

the channel with an active camera selected will

appear on the monitor. Each camera must be

assigned to a speciﬁc channel; both cameras

cannot be on the same channel or the signals will

interfere with each other.

AUTO MODE (two camera operation)

To have the receiver automatically switch between

two active channels, ﬁrst check the receiver is set to

1/2 position. Next, press the AUTO button on the top

panel of the receiver. The green LED will light and

the receiver will automatically select between the

two active cameras. The monitor will display images

from both cameras alternately.

CAMERA 2

Channel Setting

RECEIVER

Channel Setting

1 2 1/2

1 2 1 2

CAMERA 1

Channel Setting

CYCLE TIME SETTING (Time interval between

camera selections)

The default cycle time for the receiver to switch

between cameras in auto mode is preset to 4

seconds. To change the cycle time, press and hold

both of the buttons (Auto and Manual) on top of

the receiver simultaneously. The receiver will beep,

pause and then sound a beep for each second of

the cycle time, up to 30 seconds. The total cycle

time can be veriﬁed by the number of LED ﬂashes/

beeps made when you release the buttons—one

ﬂash/beep equals one second. Cycle time can be

set between 4-30 seconds. If the power adapter is

removed or the receiver loses power, the cycle

time defaults back to 4 seconds.

CAMERA CHANNEL SELECTION

This wireless surveillance system is designed to

monitor up to two cameras. Additional cameras are

sold separately.

IMPORTANT: When using more than one camera,

each camera must be assigned to a speciﬁc

channel using the channel selection switch

located on the inside the front of the camera

housing.

The camera will be set to channel 1 from the

factory. To change the camera to channel 2, you

will need to remove the sun shield and unscrew

the lens cover. Locate the channel selector. Slide

the switch to channel 2 and screw on the lens

cover back on until it’s snug. Each camera must

be assigned to a speciﬁc channel; both cameras

cannot be on the same channel or the signals will

cancel out. If using only one camera you can select

either Ch 1 or Ch 2, whichever provides the best

picture. The slide switch located on the rear of the

Receiver must be set to reﬂect the channels in use.

Set the receiver to Ch 1, Ch 2, or Ch 1/2. See further

instructions in the receiver section (page 7).

Channel Selection Switch

Indice

Altri manuali Jasco Sistema di sicurezza

Jasco

Jasco 45245 Manuale utente

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente