Jasic EVO 2.0 TR-01 Manuale utente
1
2
Your new product
Thank you for selecng this Jasic EVO 20 product.
This product manual has been designed to ensure that you get the most from your new product.
Please ensure that you are fully conversant with the informaon provided paying parcular aenon
to the safety precauons. The informaon will help protect yourself and others against the potenal
hazards that you may come across.
Please ensure that you carry out daily and periodic maintenance checks to ensure years of reliable and
trouble free operaon.
Please call your Jasic distributor in the unlikely event of a problem occurring.
Please record below the details from your product as these will be required for warranty purposes and
to ensure you get the correct informaon should you require assistance or spare parts.
Date purchased ________________________________________
From where ________________________________________
www.jasic-warranty.co.uk
Disclaimer
Whilst every eort has been made to ensure that the informaon contained within this manual is
complete and accurate, no liability can be accepted for any errors or omissions.
Please Note:
Products are subject to connual development and may be subject to change without noce.
Regularly check our product pages at www.jasic.co.uk for revision updated operang manuals.
No part of this manual may be copied or reproduced by any means without the wrien permission
of Wilkinson Star Limited.
3
PACKAGE CONTENTS AND UNPACKING
Supplied within your new Jasic EVO product package will be the following items.
Use care when unpacking the contents and ensure all items are present and not damaged.
If damage is noted or items are missing, please contact the supplier in the rst instance and before
installing or using the product.
If applicable, record the product model, serial numbers and purchase date in the informaon secon
found on the inside front page of this assembly instrucon manual.
Jasic EVO TR-01 & TR-02 Trolley
(To be used with the Jasic EVO ET-200P ACDC welding and EP-45SC cung machines).
Please Note:
Package contents may very depending on country locaon and package part number purchased
4
ASSEMBLY INFORMATION
For further informaon refer to the operang manual of the product you are ng this trolley too.
5
ASSEMBLY INFORMATION
TIG Filler Wire Holder Fing Instrucons
• Fit the TIG ller wire holder base to locaon A as shown in the below image.
• Fit the TIG ller wire holder to locaon B as shown in the below image.
B
A
6
NOTES
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
7
NOTES
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
_____________________________________
8
September 2023 Issue 2
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Jasic Sistema di saldatura
Jasic
Jasic L20701 Manuale utente
Jasic
Jasic Arc JA-140 Manuale utente
Jasic
Jasic Cut 45P Manuale utente
Jasic
Jasic EVO 2.0 EM-160C Manuale utente
Jasic
Jasic MIG250P Manuale utente
Jasic
Jasic JT-200A Manuale utente
Jasic
Jasic MIG 250C Manuale utente
Jasic
Jasic MIG 350 Pulse Separate Manuale utente
Jasic
Jasic TIG 200 P AC-DC Guida rapida
Jasic
Jasic Arc Series Manuale utente
Jasic
Jasic ARC 160GS Manuale utente
Jasic
Jasic CUT40HF Manuale utente
Jasic
Jasic EVOLVE200 PLUS Manuale utente
Jasic
Jasic TIG180P Manuale utente
Jasic
Jasic MIG SERIES Manuale utente
Jasic
Jasic MIG 270S Manuale utente
Jasic
Jasic TIG200PACDC PFC Manuale utente
Jasic
Jasic CUT80 (L205) Manuale utente
Jasic
Jasic EVO 2.0 EM-200CT Manuale utente
Jasic
Jasic TIG Series Manuale utente
