ENGLISH OPERATION MANUAL
JB SYSTEMS®6/35 USB3.1-RDS
How to search for radio stations:
Use the PRE button (15) to search for a radio station with a lower frequency or use the NEXT button (16)
to search for a radio station with a higher frequency.
Press the PRE or NEXT button shortly to activate the auto scan function : the tuner will scan the
frequencies until it finds a radio station with sufficient signal.
You can also search manually. For this, press the PRE or NEXT button for about 3 seconds. You are
now in manual mode. Each time you will now press the PRE or NEXT button shortly, the frequency will
be decreaced or increased by one step.
How to store radio channels:
There are 2 ways to do this: radio stations can be stored automatically or manually in the preset channels.
Full automatic scanning and storage:
Press the A.STORE button (25) shortly to activate the automatic radio scan and storage function.
Available radio stations will be automatically stored for all the bands..
Manual scanning and storage:
Use the T.BAND button (18) to toggle between the available radio bands FM1 > FM2 > FM3 > MW1
> MW2
Use the PRE button (15) to search for a radio station with a lower frequency or use the NEXT button
(16) to search for a radio station with a higher frequency. (see previous chapter “how to search for
radio stations)
Once you have found a radio station you want to store in the presets:
Keep the PLAY/PAUSE button (13) pressed for about 3 seconds to store the current radio station
as preset 1 of the selected band.
Keep the STOP button (14) pressed for about 3 seconds to store the current radio station as
preset 2 of the selected band.
Keep the REPEAT button (17) pressed for about 3 seconds to store the current radio station as
preset 3 of the selected band.
Keep the SHUFFLE button (24) pressed for about 3 seconds to store the current radio station as
preset 4 of the selected band
Keep the FOLDERS/PRESETS - button (21) pressed for about 3 seconds to store the current
radio station as preset 5 of the selected band
Keep the FOLDERS/PRESETS + button (22) pressed for about 3 seconds to store the current
radio station as preset 6 of the selected band
CD / USB / SD/SDHC Player:
Single play or normal (continuous) play:
Keep the button pressed for about 3 seconds to toggle between the 2 available playback modes:
SINGLE PLAY: when you press the play button, only 1 song will be played. The player stops at the
end of each track and waits at the beginning of the next track.
NORMAL PLAY: the complete CD or Storage device will be played without interruption.
Navigation:
Navigation between folders (if available on your CD):
press the FOLDERS/PRESETS –button (21) shortly to navigate to the previous folder
press the FOLDERS/PRESETS + button (22) shortly to navigate to the next folder.
Navigation between tracks:
Press the PRE button (15) shortly to go back to the starting point of the track
Press the NEXT button (16) shortly to go to the starting point of the next track
Navigation in a track:
Keep the PRE button (15) pressed to navigate backwards in the current song
Keep the NEXT button (16) pressed to navigate forwards in the current song
Repeat function:
Press the REPEAT button (17) shortly to toggle between the available repeat modes:
RPT ONE (REPEAT ONE): the same track will be played and repeated contuniously
RPT FOLD (REPEAT FOLDER): all the songs of the current folder will be played and repeated
continuously
