JBL JBL On Stage Micro Manuale utente

jbl on stage micro portable iPod music dock

portable iPod music dock

User Guide

English

Deutsch

Français

Español

Italiano

Dutch

Korean

Danish

Norwegian

Japanese

Simplied Chinese

™*®

iPod not included

fcc regulations

FCC Declaration of Conformity Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modications not expressly approved by JBL could void the user’s authority to operate the equipment.

jbl on stage micro safety instructions

Please read the following precautions before use:

• Read instructions. All safety and operating instructions should be read thoroughly before attempting to operate this audio system.

• Retain instructions for future reference.

• Heed warnings. All warnings on this audio system and in the operating instructions should be adhered to.

• Follow instructions. All operating and use instructions should be followed.

• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.

PLEASE REFER SERVICING TO QUALIFIED JBL SERVICE PERSONNEL.

• Do not expose the speakers to liquid or solvent.

• Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts. Refer all servicing to the JBL

Technical Support Group.

• Do not expose the speaker system to temperature or humidity extremes, direct sunlight, excessive dust or vibrations.

• Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the controls or put heavy objects on top of the speaker.

• If cleaning is required, use a soft, dry cloth. If necessary, use a damp cloth without any solvents.

• In order to protect the speaker system, avoid microphone feedback, continuous output from electronic musical instruments or distorted output from any

signal source.

• Do not place the speakers close to uorescent light sources or neon light xtures.

• Although the speakers are magnetically shielded, keep magnetic storage media (disks and tapes) at least four inches from the speaker system in order to avoid

data loss.

• WARNING: To reduce the risk of re or electric shock, do not expose this speaker system to rain or moisture.

• Use only JBL-approved power supplies listed on the product label.

™*

jbl on stage micro easy setup guide

Step 1. Unpack JBL On Stage

Micro, adapters, remote control

and input cable. Read these

instructions completely.

Step 2. Move the battery door to

the unlocked position to open

the battery compartment.

Step 3. Place four AAA batteries

in the battery compartment.

Step 5. Place the appropriate iPod® adapter onto JBL On Stage Micro.

Place your iPod on the docking connector or connect the audio input

cable to the rear of JBL On Stage Micro. Connect the audio cable to

the audio source.

Step 4. Connect the power adapter

plug into the input marked on the

rear of JBL On Stage Micro and

plug the power adapter into a wall

outlet or power strip.

Step 6. Press the Power button

on the back of JBL On Stage

Micro. A green LED will light

when the JBL On Stage Micro

system is on.

Step 7. Adjust the volume using

(+) to increase and (–) to decrease.

Press both to mute the JBL On

Stage Micro. Press either button to

unmute.

™*

troubleshooting your jbl on stage micro

Symptom Possible Problem Solution

Troubleshooting

If you have any questions or need further assistance, please visit www.jbl.com.

These specications are subject to change without notice.

No sound from the JBL

On Stage Micro speaker

system.

™*

JBL On Stage Micro Specications

Frequency Range:

70Hz – 20kHz

Power Consumption:

10W maximum

Power Input:

6V/1.5A

JBL On Stage Micro Transducer:

(2) 1 Full range per channel

Dimensions:

Diameter – 6 (150mm)

Height – 1-3/4 (38mm)

System Weight:

2.22 lb (1.01kg)

Battery:

Size – AAA

Type – Alkaline, NiMh

DO NOT MIX BATTERY TYPES.

DO NOT MIX CHARGED AND

PARTIALLY CHARGED BATTERIES.

BATTERIES WILL NOT RECHARGE

WHILE IN JBL ON STAGE MICRO.

Ensure that the power supply is connected to a live

power source and properly connected to JBL On Stage

Micro. Note: When JBL On Stage Micro is

powered, a green power LED on the JBL On Stage

Micro should light up.

Touch the volume “Up” (+) pad on the volume control

to unmute and/or increase the system volume level.

Note: Touching the volume “Down” (–) pad lowers

the system volume. Touching both the (+) and (–)

volume control pads at the same time will mute the

system.

Increase the volume level on the audio source device.

Replace the batteries.

Press the Play button on the iPod or remote control.

Note: If the iPod is paused more than ten minutes,

press the JBL On Stage Micro Power button to turn

the unit back on. Press either (+) or (–) to unmute.

No power to the system.

Power adapter plug is not

inserted correctly.

No volume or low volume.

Input source is low.

Low or drained batteries.

iPod paused.

iPod paused (battery only

mode).

Symptom Possible Problem Solution

Troubleshooting

This product is intended to be supplied by a listed direct plug-in power unit marked Class 2, with output rated 18V AC minimum 2.5A.

JBL On Stage Micro has been muted

for more than ten minutes in the bat-

tery-only mode.

Wall adapter is not plugged into JBL

On Stage Micro correctly.

Wall adapter is not receiving AC power.

No sound from the JBL On Stage

Micro speaker system (continued).

No power; green LED is not on.

Press JBL On Stage Micro Power button to turn the unit

back on. Press either (+) or (–) to unmute.

Check the connection of the wall adapter.

Place the wall adapter in a known powered outlet. Test the

outlet with a lamp or other device.

Connect JBL On Stage Micro to a known audio source. Test

the audio source with headphones.

jbl on stage micro remote easy setup guide

1 In the battery-only mode, JBL On Stage Micro will turn off to save battery power when muted or paused for longer than ten minutes.

volume down

iPod play/pause1

iPod previous/rewind

iPod play/iPod scroll up

iPod menu

volume up

JBL On Stage Micro

mute/unmute1

iPod next/fast forward

iPod scroll down

iPod select/enter

™*

Harman Consumer Group, Inc.

8500 Balboa Boulevard, Northridge, CA 91329 USA

1.516.255.4525 (USA only)

www.jbl.com

JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.

*The trademark On Stage is used with permission of OSA International, Inc.

iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.

A Harman International®Company

Altri manuali per JBL On Stage Micro

Indice

Altri manuali JBL Stazione di attracco

JBL

JBL On Time 400iHD Manuale utente

JBL

JBL OnBeat Mini Manuale utente

JBL

JBL OnBeat air Manuale utente

JBL

JBL smartbase Manuale utente

JBL

JBL on stage II Manuale utente

JBL

JBL ON AIR WIRELESS Manuale utente

JBL

JBL JBL On Stage Micro Manuale utente

JBL

JBL on stage micro II Manuale utente

JBL

JBL ON STAGE MICRO III Manuale utente

JBL

JBL On Time Manuale utente

JBL

JBL On Stage III WM Manuale utente

JBL

JBL OnBeat Rumble Manuale utente

JBL

JBL ON STAGE 400P Manuale utente

JBL

JBL ON STAGE III Manuale utente

JBL

JBL On Call 5310 Manuale utente

JBL

JBL ON STAGE 200iD Manuale utente

JBL

JBL OnBeat RIZE Manuale utente

JBL

JBL ON STAGE 200iD Manuale utente

JBL

JBL ON STAGE 200iD Manuale utente

JBL

JBL ON STAGE MICRO III Manuale utente

JBL

JBL ONBEAT AWAKE Manuale utente

JBL

JBL JBL On Stage Micro Manuale utente

JBL

JBL radial micro Manuale utente

JBL

JBL On stage Guida rapida

Manuali Stazione di attracco popolari di altre marche

Sony

Sony Dream Machine XDR-DS12iP Manuale utente

Acer

Acer USB Type-C Dock II Manuale utente

ATEN

ATEN UC-2000 Manuale utente

Xcellon

Xcellon HDD-202 Manuale utente

Dok

Dok CR09 Manuale utente

Philips

Philips BTM630/12 Manuale utente

IOGear

IOGear Travel Pro GUD3C09 Manuale utente

RKI

RKI SDM-E2 Manuale utente

iHome

iHome iP15 Manuale utente

VITURE ONE

VITURE ONE MOBILE DOCK Manuale utente

Lindy

Lindy 42984 Manuale utente

CipherLab

CipherLab 8001 Manuale utente

Pyle

Pyle PIPDSP2 Manuale utente

Avol

Avol AS2350 Manuale utente

Datalogic

Datalogic JoyaTouch Manuale utente

Philips

Philips DC190/79 Manuale utente

Targus

Targus DOCK315EUZ Manuale utente

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuale utente