JBL Spyro Manuale utente

jbl spyro stereo system with subwoofer

stereo system with subwoofer

User Guide

English

Deutsch

Français

Español

Italiano

Dutch

Korean

Danish

Norwegian

Japanese

Simplied Chinese

™

fcc regulations

FCC Declaration of Conformity Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference; and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Radio and Television Interference

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation.

If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and then on, the user is encour-

aged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.

• Connect the equipment to a different outlet so that the equipment and receiver are on different branch circuits.

• Consult the dealer or an experienced radio/TV technician for help.

Changes or modications not expressly approved by JBL could void the user’s authority to operate the equipment.

jbl spyro safety instructions

Please read the following precautions before use:

• Read instructions. All safety and operating instructions should be read thoroughly before attempting to operate this audio system.

• Retain instructions for future reference.

• Heed warnings. All warnings on this audio system and in the operating instructions should be adhered to.

• Follow instructions. All operating and use instructions should be followed.

• TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). THERE ARE NO USER-SERVICEABLE PARTS INSIDE THIS UNIT.

PLEASE REFER SERVICING TO QUALIFIED JBL SERVICE PERSONNEL.

• Do not expose the speakers to liquid or solvent.

• Never remove grille covers in order to service the speaker system. The speaker system does not contain any user-serviceable parts. Refer all servicing to the JBL

Technical Support Group.

• Do not expose the speaker system to temperature or humidity extremes, direct sunlight, excessive dust or vibrations.

• Place the speaker system on a stable, level surface. Do not drop, apply excessive force to the controls or put heavy objects on top of the speaker.

• If cleaning is required, use a soft, dry cloth. If necessary, use a damp cloth without any solvents.

• In order to protect the speaker system, avoid microphone feedback, continuous output from electronic musical instruments or distorted output from any

signal source.

• Do not place the speakers close to uorescent light sources or neon light xtures.

• Although the speakers are magnetically shielded, keep magnetic storage media (disks and tapes) at least four inches from the speaker system in order to avoid

data loss.

• WARNING: To reduce the risk of re or electric shock, do not expose this speaker system to rain or moisture.

• Use only JBL-approved power supplies listed on the product label.

™

jbl spyro easy setup guide

Step 1. Unpack the JBL Spyro

subwoofer, satellites, power

adapter and input cable. Read

these instructions completely.

Step 2. Plug the left and right

satellites into position on the

rear of the subwoofer.

Step 4. Connect the power

adapter plug into the position

marked on the rear of subwoofer.

Step 5. Plug the power adapter

into a wall outlet or power strip.

Step 6. Press the Power button

on the back of JBL Spyro. A

green LED will light when the

JBL Spyro system is on.

Step 7. Adjust the volume using

(+) to increase and (–) to decrease.

Press both to mute JBL Spyro. Press

either button to unmute.

Step 8. Adjust the bass level by

turning the Bass-Level knob on the

rear of the subwoofer.

Step 3. Connect the audio input

cable to the rear of the subwoofer.

Connect the audio cable to an

audio source.

™

troubleshooting your jbl spyro

Symptom Possible Problem Solution

Troubleshooting

If you have any questions or need further assistance, please visit www.jbl.com.

These specications are subject to change without notice.

No sound from the JBL Spyro

speaker system.

No power to the system.

Power adapter plug is not

inserted correctly.

No volume or low volume.

Input source is low.

™

JBL Spyro Specications

Frequency Range:

40Hz–20kHz

Power Consumption:

30W maximum

Power Input:

18V/2.5A

Satellite Transducer:

(1) 1 (25mm)Full-range

per channel

Amplier Output Power:

6W RMS per channel

Subwoofer Transducer:

6 (152mm)Atlas

Amplier Output Power:

24W RMS

Satellites Dimensions:

Diameter – 3-1/4 (83mm)

Height – 2 (51mm)

Subwoofer Dimensions:

Diameter – 8 (203mm)

Height – 5-1/2 (140mm)

System Weight:

4.3 lb (1.95kg)

Ensure that the power supply is

connected to a live power source

and is properly connected to JBL

Spyro. Note: When JBL Spyro is

powered, a green power LED on

the JBL Spyro subwoofer should

light up.

Touch the volume “Up” (+) pad

on the volume control to un-

mute and/or increase the system

volume level.

Note: Touching the volume

“Down” (–) pad lowers the

system volume. Touching both

the (+) and (–) volume control

pads at the same time will mute

the system.

Increase the volume level on the

audio source device.

Symptom Possible Problem Solution

Troubleshooting

This product is intended to be supplied by a listed direct plug-in power unit marked Class 2, with output rated 18V AC minimum 2.5A.

Check the connection of the wall adapter.

Place the wall adapter in a known powered outlet. Test

the outlet with a lamp or other device.

Connect JBL Spyro to a known audio source. Test the

audio source with headphones.

Check the right satellite connection. Press it rmly into

the subwoofer.

Check the satellite connections. Press them rmly into

the subwoofer.

Adjust the Sub Level knob on the rear of the subwoofer

to the desired bass level.

Wall adapter is not plugged into JBL Spyro

correctly.

Wall adapter is not receiving AC power.

Right satellite is not plugged in correctly.

Left and right satellites are not connected

to correct subwoofer connector.

Incorrect bass setting.

No power; green LED is not on.

No volume control on right satellite.

No bass.

Harman Consumer Group, Inc.

8500 Balboa Boulevard, Northridge, CA 91329 USA

1.516.255.4525 (USA only)

www.jbl.com

JBL and Harman International are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries.

JBL Spot is a trademark of Harman International Industries, Incorporated.

A Harman International®Company

Altri manuali per spyro

Indice

Manuali Sistema di altoparlanti popolari di altre marche

JVC

JVC CA-MXK5R Manuale utente

LG NB4532B Manuale utente

JVC

JVC CA-FSH100 Manuale utente

5Core

5Core Pro Series Manuale utente

EAW

EAW MQV1394e Manuale utente

Lynx

Lynx GXR-LA10A Manuale utente

iLive

iLive ITB066B Manuale utente

RDX

RDX QuickStation 4 Manuale utente

Electro-Voice

Electro-Voice S-122 Manuale utente

Sven

Sven SPS-619 GOLD Manuale utente

Pioneer

Pioneer CS-7070 Manuale utente

EAW

EAW UB82e Manuale utente

Sondpex

Sondpex Active Speaker System and Digital Music... Manuale utente

JVC

JVC NX-PN7 Manuale utente

Marshall Amplification

Marshall Amplification AR-DM61-BT Manuale utente

Yamaha

Yamaha NX-A01 - Speaker Sys Manuale utente

SE Audiotechnik

SE Audiotechnik I-LINE Manuale utente

Gemini

Gemini WRX-843 Series Manuale utente

JBL spyro Manuale utente

Manuali Sistema di altoparlanti popolari di altre marche