JBL L75ms Manuale utente
Owners Manual
©2022 Harman International Industries, Incorporated
Features, Specifications, and Appearance subject to change without notice.
L75ms
Integrated Music System
L75ms
Integrated Music System
Owners Manual
©2022 Harman International Industries, Incorporated
Features, Specications, and Appearance subject to change without notice.
JBL.com/Specialty-Audio/
L75ms
Integrated Music System
Owners Manual
©2022 Harman International Industries, Incorporated
Features, Specications, and Appearance subject to change without notice.
JBL.com/Specialty-Audio/
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/
Pg 2
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings.
Install this apparatus in accordance with the
manufacturer’s instructions.
7. Do not install this apparatus near any heat
sources such as radiators, heat registers,
stoves or other apparatus (including
ampliers) that produce heat.
8. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding-type plug has two blades
and a third grounding prong. The wide blade
or the third prong is provided for your safety. If
the provided plug does not t into your outlet,
consult an electrician for replacement of the
obsolete outlet.
9. Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles and the point where they exit from
the apparatus.
10. Use only attachments/accessories specied
by the manufacturer.
11. Use only with the cart, stand,
tripod, bracket, or table
specied by the manufacturer
or sold with the apparatus.
When a cart is used, use
caution when moving the cart/
apparatus combination to avoid injury from tip-
over.
12. Unplug this apparatus during lightning storms
or when unused for long periods of time.
13. Refer all servicing to qualied service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as when the power-supply cord or
plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, or
the apparatus has been exposed to rain or
moisture, does not operate normally or has
been dropped.
14. To disconnect this apparatus from the AC
mains completely, disconnect the power-
supply cord plug from the AC receptacle.
15. The mains plug of the power-supply cord shall
remain readily operable.
16. This apparatus is intended to be used only
with the power supply and/or charging cable
provided by the manufacturer.
The following instructions may not apply to waterproof
devices. Refer to your device user manual or quick
start guide for more waterproof instruction if any.
• Do not use this apparatus near water.
• Do not expose this apparatus to dripping or
splashing, and ensure that no objects lled
with liquids, such as vases, are placed on the
apparatus.
WARNING: TO REDUCE THE RISK OF FIRE
OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPARATUS TO RAIN OR MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT OPEN.
THIS SYMBOL ON THE PRODUCT MEANS
THERE IS UNINSULATED, DANGEROUS
VOLTAGE WITHIN THE PRODUCT
ENCLOSURE THAT MAY PRESENT A RISK
OF ELECTRICAL SHOCK.
THIS SYMBOL ON THE PRODUCT MEANS
THERE ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THIS
GUIDE.
Visit the product page at jbl.com/specialty-audio and
download the Safety Sheet for a full list of safety
instructions.
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/ Pg 3
Table of Contents
IMPORTANT SAFETY INSTRUCTIONS .........................................................................................................2
Product Overview...........................................................................................................................................4
Basic Wiring Diagram ...................................................................................................................................4
What’s in the Box .........................................................................................................................................4
Rear Panel Connections ..............................................................................................................................5
Top Panel Controls .......................................................................................................................................6
Remote Control Buttons ...............................................................................................................................6
Initial Setup .....................................................................................................................................................7
Speaker Placement ......................................................................................................................................7
Pairing the Remote ......................................................................................................................................7
Connecting Sources .....................................................................................................................................8
Connecting to Network .................................................................................................................................8
Connecting a Bluetooth Device ....................................................................................................................9
Using the L75ms...........................................................................................................................................10
Wake from Standby ....................................................................................................................................10
Selecting and Playing Sources ..................................................................................................................10
Controlling L75ms Volume .........................................................................................................................11
Sound Field Enhancement (SFX) ..............................................................................................................11
Specications ...............................................................................................................................................12
Wireless Specication ................................................................................................................................12
Product Specications ................................................................................................................................12
Troubleshooting ...........................................................................................................................................13
Restoring Factory Defaults .........................................................................................................................13
Updating Firmware .....................................................................................................................................13
Trademarks and Licenses............................................................................................................................14
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/
Pg 4
Product Overview
The L75ms supports a variety of sources from wireless streaming via Bluetooth and Wi-Fi to hard wired sources
such as a phono turntable or TV. While some connections are specic, others can be any device that matches
that match the connections type.
Basic Wiring Diagram
Sub Out: Single RCA to
Powered Sub (Optional)
Phono: Stereo RCA
plus Ground
Ethernet: Connect to port
on wireless router for
streaming
HDMI ARC: ARC from TV
Aux In: 3.5mm (1/8in)
Stereo
What’s in the Box
1x L75ms Integrated Music System
1x Speaker Grille
1x RF Remote
1x Region Specic Power Cord
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/ Pg 5
Rear Panel Connections
NOTE: Connections not noted here are for service use only and have no operation for regular use.
AEthernet RJ-45 10/100bit
BReset Resets L75ms to Factory Defaults. Refer to Restoring Factory Defaults for details.
CBass Contour Use to adjust for bas compensation based on nearness to boundaries.
Refer to Speaker Placement for details.
DSub Out Single RCA - Connect to Powered Sub with LFE input
EAux In 3.5mm (1/8") TRS Stereo Analog
FPhono In (MM)
RCA Stereo for Moving Magnet (MM) Phono Cartridge with Ground connection.
Note: This input is congured for the gain required for a turntable and is not
intended for analog line level outputs.
GHDMI ARC Standard HDMI with ARC for use TV ARC Input. Only accepts 2ch PCM signals
HAC Power Connect with supplied power cord.
IMain Power Switch Ensure switch is on O position while connecting or disconnecting sources.
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/
Pg 6
Top Panel Controls
ASource Indicators
Indicates connection status.
NET – White=Connected | Blinking=Searching | Red=Network Disabled
Sources – White=Active | O=Not Active
BVolume Controls Controls output volume of speaker
CSource Selection Press to move to the next source.
DVolume Indicator Dots illuminate from left to right as volume increases.
Remote Control Buttons
APower Toggles L75ms ON or OFF
BVolume Controls Volume Up / Down and Mute
CPlayback Controls Previous / Next and Play / Pause
DDirect Source Selection Network Streaming / HDMI-ARC / Phono /
Bluetooth / 3.5mm TRS Stereo Analog
ESFX (Sound Field
Enhancement)
Press to expand output to a more spacious
sound eld.
Refer to Sound Field Enhancement (SFX)
for more details.
Note: Pressing any button on the remote will wake the L75ms from Standby.
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/ Pg 7
Initial Setup
Speaker Placement
Setting Boundary Compensation
The L75ms was designed to be placed on top of a cabinet or table in a open area away from boundaries
such as walls or cabinet surfaces. The bass contour switch is used to compensate for placing the speaker
on cabinet shelf where side and top areas are close to the speaker.
Set the Bass Contour switch located on the rear panel based on the speakers proximity to side boundaries
such as walls or the inside of a bookcase or cabinet. When close to a boundary the switch should be in the
-3dB position in order to maintain level bass response.
Speaker on top of cabinet and away from walls. Set Bass Contour to 0dB
BASS
CONTOUR
0dB
-3dB
Speaker on cabinet shelve or close to walls. Set bass contour to -3dB
BASS
CONTOUR
0dB
-3dB
Pairing the Remote
Before the L75ms can be controlled via the included remote, the included remote must be paired to the L75ms.
1. Press & Hold the volume minus and source selection buttons on the top panel simultaneously for 2secs
to initiate pairing mode.
2. Press & Hold the Network Stream and Play/Pause buttons on the remote simultaneously for 3secs.
-
1 2
Press & Hold >2 sec Press & Hold >3 sec
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/
Pg 8
Connecting Sources
AUX – Connect using a 3.5mm (1/8”) TRS Stereo female for analog 2ch. Pinout follow standard
conguration. Refer to Rear Panel Connections item E.
PHONO – Connect the stereo analog output of a turntable and the GND from the turntable to the GND on
the L75ms. Note that this input is phono level can is not intended for analog line level outputs.
Refer to Rear Panel Connections item F.
HDMI-ARC – Connect to the ARC input of a TV. Select the ARC input on the TV after making this
connection and powering On the L75ms. Refer to Rear Panel Connections item G.
Note: The HDMI-ARC input on the L75ms does not decode multichannel or Dolby 2ch audio formats. In order
for the L75ms to play content delivered to the HDMI/ARC the source device output must be set to 2ch
PCM. Refer to the owners manual for your source device on details on how to select 2ch PCM output.
Connecting to Network
Wired Network Connection
Connect the Ethernet port on the rear to the port on a
wireless router using a CAT-5e or higher cable. NET on the
top panel will illuminate white once a network connection
has been established. The L75ms is now available on the
network for casting from media players such as Spotify or
iTunes.
Note: If the NET icon is RED then network is disabled and must
be enabled in order to connect. Refer to Enabling and
Disabling Network and Bluetooth and Bluetooth for details.
Wi-Fi Direct Connection
The Google home app is used to connect the L75ms to a Network for Android and Apple iOS devices. If you
choose to not use Google Home and connect an Apple iOS device with Airplay, refer to Wi-Fi Connection
with Airplay.
Wi-Fi Connection with Google Home
1. On your mobile device, download and open the Google Home App.
2. Follow Google Home instructions to add devices.
3. Follow the prompts for adding devices. Note: We recommend giving the speaker a common name so
that it can be easily found for streaming later.
NOTE: We recommend giving the L75ms a user-friendly name such as Living Room Speaker, if you choose
to do so write it down as it will be what is used to connect to the unit for Wi-Fi or Bluetooth streaming.
'ŽŽŐůĞ,ŽŵĞ
Google Home
White=Connected | Blinking=Searching |
Red=Network Disabled
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/ Pg 9
Wi-Fi Connection with Airplay
1. Navigate to the network settings for your iOS device.
2. Select Wi-Fi and navigate to Setup New Airplay Speaker.
3. Select the device named L75MS-XXXXX. The XXXXXX is the corresponding MAC address.
4. Select the network for the L75ms to use and select Next.
5. Follow the on-screen instructions to complete the setup of the L75ms as an Airplay speaker.
Enabling and Disabling Network and Bluetooth
Network and Bluetooth functionality may be turned O should it be desired to do so. The same button operation
can be used to turn Network and Bluetooth back On.
Press Source Selection & Volume + on the top panel simultaneously for >3 seconds.
Press Simultaneously
+
Press Simultaneously
Note: When the Network and Bluetooth is O the following conditions exist.
• Speaker cannot be used for Network or Bluetooth streaming.
• Handheld remote is in-operable and the unit can only be used via the top panel buttons.
• Network icon on top panel with show Red indicating that Network has been turned o.
Connecting a Bluetooth Device
Connection via Bluetooth is the same as other Bluetooth devices and varies from mobile device to mobile
device. Refer to the owner’s manual for the device being connected prior to performing the following steps.
1. Select the Bluetooth source via the button on the remote or via the top panel source selection.
2. Press & Hold the Bluetooth source or the source selection button for >3 seconds.
3. Navigate to your devices Bluetooth menu and select JBLL75MS from the list. Note if the name was
changed during Google Home setup, that name will be listed.
Select the Bluetooth Source Select L75ms in your devices Bluetooth menuPress & Hold >3 sec
L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/
Pg 10
Using the L75ms
Wake from Standby
The L75ms enters standby mode when the power button is pressed or after 10mins of no signal on a
selected source. To wake the L75ms from standby perform one of the following operations.
• Press any button on the remote or top panel.
• Connect to the L75ms via a Bluetooth or Wi-Fi Streaming Source.
• Power On device connected to L75ms via HDMI ARC
Selecting and Playing Sources
Sources may be selected directly by pressing the desired source button on the remote, using the source
selection button on the top panel, or automatically for Network or Bluetooth streaming and HDMI ARC.
Sources that can be automatically played will also wake the L75ms from Standby.
Using the Top Panel
Sources may be selected using the Source selection button located in the center of the top panel controls.
Pressing it advance to the next source to the right. The source will illuminate White when it is active.
Sources can also be selected directly using the buttons on the included RF remote.
Refer to Remote Control under Product Overview for details.
Press to
Advance to
Next Source
AStreaming Sources Auto Switch - Selected when a device initiates a stream.
BBluetooth Auto Switch - Selected when a device connects via Bluetooth.
Refer to Connecting a Bluetooth Device on details to connect a device.
CHDMI-ARC Auto Switch - Selected when a device connected to the HDMI input is powered
on.
DPhono Analog stereo from turntable.
EAUX Analog stereo via 3.5mm (1/8") TRS Stereo Analog.
Altri manuali per L75ms
4
Indice
Altri manuali JBL Impianto stereo
JBL
JBL Authentics L8 Manuale utente
JBL
JBL spyro Manuale utente
JBL
JBL VERTEC DrivePack DP Series Manuale
JBL
JBL L75ms Manuale utente
JBL
JBL Media 3000 Manuale utente
JBL
JBL Soundzone SMS1 Manuale utente
JBL
JBL Synthesis Manuale utente
JBL
JBL ProPerformers Plus Manuale utente
JBL
JBL Authentics L 16 Manuale utente
JBL
JBL VLA-C SERIES Manuale utente
