JC LAB BIMC-12A Manuale utente
1.0 Copyright Page 1 - 3
2.0 Microscope at a Glance Page 4
3.0 Introducon Page 5
4.0 Unpacking and Assembly Page 5
5.0 Microscope Accessories Page 6 - 7
6.0 Using the Microscope Page 8
7.0 Maintenance Page 9
8.0 Electrics Page 10
9.0 Recycling and Revcovery Page 10
INDEX
Copyright
© 2012 by JC LAB Corporaon. All rights reserved. Under the copyright law,
this manual cannot be reproduced in any form without the prior wrien
permission of JC LAB. No patent liability is assumed, with respect to the use of
the informaon contained herein.
First edion Feb. 2012
Disclaimer
This manual has been validated and reviewed of accuracy. The instrucons
and descripons it contains are accurate for your wi-microscope at the me
of this manual’s producon. However, succeeding wi-microscope and
manuals are subject to change without noce. JC LAB assumes no lability for
damages incurred directly or indirectly from error, omissions or discrepancies
between the wi-microscope and the manual.
Trademarks
◆JC CAM logo are registered trademarks of JC LAB Corporaon.
◆Wi-Fi is registered trademark of Wi-Fi Alliance.
◆USB, the USB logo and USB interface are trademarks or registered
trademarks of USB Licensing LLC.
Other trademarks are registered trademarks not listed above may be used in
this manual.
EU Declaraon of Conformity
This Product is carrying the CE-Mark in accordance with the related
European Direcves. Responsible for CE-Marking is JC LAB Japan
GmbH, 5 Chome-12-13 Serigaya Kōnan-ku, Yokohama-shi,
Kanagawaken 233-000, Japan. The complete and ocial EU
Declaraon of Conformity can be found on JC LAB website
hp://www.jc-lab.jp on the internet.
1.0 Copyright
Page 1
Disposing of the Microscope and It’s Baeries
◆Discard this Microscope in accordance with applicable laws and
regulaons. For further informaon, contact your government.
◆Some models contains rechargeable baeries. Aer repeated use, the
baeries will nally lose their ability to hold a charge and you will need to
replace them. Under certain applicable laws and regulaon, it may be
illegal to dispose of old baeries by replacing them in the trash.
◆Please be kind to our shared environment. Check with your local
government authority for details regarding where to recycle old baeries
or how to dispose of them properly.
Informaon for Wireless Devices
Page 2
Wireless Devices and your Health
Wireless Products, like other radio devices, emit radio frequency
electromagnec energy. The level of energy emied by Wireless products
however is far much less than the electromagnec energy emied by wire
device like for example mobile phones.
Because Wireless products operate within the guidelines found in radio
frequency safety standards and recommendaons, JC LAB believes Wireless
products is safe for use by consumers. These standards and recommendaons
reect the consensus of scienc community and result from deliberaons of
panels and commiees of sciensts who connually review and interpret the
extensive research literature.
In some situaons or environments, the use of Wireless Products may be
restricted by the proprietor of the building or responsible representaves of
the organizaon. These situaons may for example includes:
◆Using the Wireless products equipment on board of airplanes, or
◆In any other environment where the risk of interference to other devices
or services is perceived or idened as harmful.
If you are uncertain of the policy that applies on the use of wireless devices in
a specic organizaon or environment (e.g. airports), you are encouraged to
ask for authorizaon to use the Wireless device prior turning on the
equipment.
1.0 Copyright
Canada — Industry Canada (IC)
This device complies with RSS 210 of Industry Canada.
Operaon is subject to the following two condions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may case undesired operaon on this device.
The Term “IC” before the equipment cercaon number only signies that
the Industry Canada technical specicaons were met.
USA-Federal Communicaons Commission (FCC)
Page 3
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part of FCC Rules. These limits are designed
to provide reasonable protecon against harmful interference in a residenal
installaon.
JC LAB Support
If you require any addional help your devices or if you are having problems
operang devices, you may need to contact JC LAB for addional technical
assistance.
Before you call
Some problem you experience may be related to soware, apps or the
operang system so it is importance that you invesgate other sources of
assistance rst.
Before contacng JC LAB, try the following:
Review troubleshoong secons in the documentaon supplied withyour
soware and/or peripheral devices.
If problem occurs when you are running in your computer systems, consult the
soware document for troubleshoong suggesons and consider calling the
system company’s technical support department for assistance.
Consult the reseller or dealer from where you purchased your devices and
soware— they are your best resource for current informaon and support.
JC LAB technical support
If you are sll unable to solve the problems and suspect that it is hardware
related, visit JC LAB technical support website
hp://www.jc-lab.jp
1.0 Copyright
Page 4
Note: Microscope features may vary based on your locaon, language,
carrier, and model number. Accessory parts may incur addional fees.
Contact your local distributor to ensure the features.
1. Monocular Head
2. Stand
3. Nosepiece
4. Objecve Lens
5. Stage Clip
6. Mechanical Stage
7. Condenser Knob
8. Fine Adjustment Knob
9. Coarse Adjustment Knob
10. Light Intensity Adjust
11. Power Plug
12. Fuse Box
13. On/O Switch
14. Viewing adjust
15. Condenser Turning
16. Y-axis movement
17. X-axis movement
18. Light Source Cover
1
Microscope at a Glance
2
9
5 & 6 8
16 & 17
14
3 & 4
11, 12 & 13
7 & 15
18
10
2.0 Microscope at a Glance
BIMC-12A
This microscope is a scienc precision instrument designed to last for many
years with a minimum of maintenance. It is built to high opcal and
mechanical standards and to withstand daily classroom and laboratory use.
JC LAB reminds you that this manual contains important informaon on safety
and maintenance, and that it must therefore be made accessible to the
instrument users. JC LAB declines any responsibility deriving from instrument
use that does not comply with this manual.
Page 5
4.1 The microscope is housed in a moulded Styrofoam container. Remove
the tape from the edge of the container and li the top half of the container.
Take some care to avoid that the opcal items (objecves and eyepieces) fall
out and get damaged. Li the microscope from the container and put it on a
stable desk.
4.2 The objecves are located in individual protecve vials. Remove the
objecves from the vials and insert them into the microscope nosepiece in the
order from the lowest magnicaon to the highest, in a clockwise direcon
from the rear.
3.0 Introducon
4.0 Unpacking and Assembly
5.0 Microscope Accessories
BIMC-A03A
Live stream with mulple devices
BIMC-A03A can send streaming images to a
maximum of 10 Wi-Fi enabled devices without
the need for a router. High resoluon streaming
Wi-Fi camera.
Turns convenonal microscope into a
wireless digital microscope camera!
Image Sensor:
APTINA MT9P001 CMOS (Colorful)
Scan Mode:
Scan line by line
Maximum Resoluon:
2592 x 1944 (5038848 pixels)
Sensor Opcal Format:
1/2.5” [5.70mm x 4.28mm (H x V), Diagonal 7.13mm]
Pixel Size:
2.2μm x 2.2μm
Dynamic Range:
70.1dB
ADC:
12-bit, 8-bit R.G.B to PC
SNRmax:
38.1dB
Spectral Characteriscs:
380-650nm (during dayme mode)
Preview Mode (USB & Wi 5G):
10FPS@2592x1944, 15FPS@1920x1080, 30FPS@1280x960,
1280x720, 1024x768, 800x600, 640x480
Binning Mode:
1 x 1, 2 x 2
Exposure Capability:
3.9ms-320ms, Automac and Manual
White Balance:
Automac and Manual
Soware Interface:
Direct Show
Capture Modes:
Photo and video
Support System:
Microso® Windows XP/7/8/8.1/10, IOS, Android
Computer Conguraon:
CPU: equal or more than the second generaon Intel core
2.8GHz, Memory: 2GB or more, USB port: USB 2.0 / 3.0 or more,
Displayer: suggest 17” or larger
Packing size:
245 x 155 x 90mm (L x W x H)
*Standard packing: Main Body + 0.5x Eyepiece + 30mm
& 23.2mm Adapter + Soware CD + USB
Page 6
Page 7
Stage Micrometer for Microscope
Calibraon with NIST cercaon Lens Cleaning Tissue for slide cleaning
5.0 Microscope Accessories
BIMC-S09A TOO-155E
Rechargeable baery (Portable
power bank) For BIMC-12A
BIMC-ACPB12A
Digital Drying Cabinet, Cap. 60L
CHD-60
Slide Folder, hold 20pcs of slide
MCS-SL01A
Page 8
6.0 Using the Microscope
6.1 Turn the observaon head to a comfortable
posion for observaon
6.2 Ensure that the specimen is centred over the stage opening. Lock the
specimen slide on the mechanical stage using the two slide clamp
6.3 Insert the plug of the cable into the power socket on the back of the
microscope to charge it and turn the switch to the charge mode (on the right
side of the main body).
6.4 Rotate the coarse focusing knob to bring the slide into focus with the 4X
objecve. Adjust the ne focusing knob to get the image sharp and clear.
6.5 Adjust the aperture of the iris diaphragm to set the numerical aperture of
the illuminator, thus controlling image contrast and resoluon.
6.6 Turn the nosepiece to choose the objecve you need.
Caution:
The maximum light intensity when using the 4x and 10x
can damage the eyes!
Caution:
It is recommended to use slides of 1.0 – 1.2 mm thickness in
combination with cover glasses of 0.13 mm or 0.17 mm
thickness.
Altri manuali per BIMC-12A
1
Indice
Lingue:
Altri manuali JC LAB Microscopio
