JCM Technologies KEELock Manuale utente
Programming
· 868 MHz (radio) /13,56 MHz (card) · IP54 ·
· 1 x 3,6V ER17335M Lithium Battery (1500 mAh) ·
· Op. temperature -20ºC to +70ºC · 15000 cycles · EN
KEELock
Electronic cylinder for
residential installations
quick guide
jcmtechnologies
Enter programming
mode.
Press the transmitter
button to program.
Exit programming
mode.
Technical Data
Operation
Press transmitter buttons
to open the door.
Wake up. Transmitter validated.
Cylinder unlocked.
If after unlocking the light becomes red instead of green, the
device is informing that a battery replacement is needed.
jcmtechnologies
EC Declaration of Conformity
JCM TECHNOLOGIES, S.A. declares that KEElock complies with the requirements of the
1999/5/ CEE R&TTE Directive, insofar as the product is used correctly.
See web page www.jcm-tech.com/declarations
Total reset
Enter total reset mode.Enter programming
mode.
If there is no
activity in 10
seconds, the device
will exit from confi-
guration mode.
QG_3200823_KEELOCK_EN_Rev01
Enter reset mode. Press the transmitter
button to reset.
Exit reset mode.
Single reset
Problem solving
See our website for troubleshooting: www.jcm-tech.com/JCM/keelock
Altri manuali JCM Technologies Serratura della porta
