JEA Technologies TPM-193R Manuale utente

TPM-193 Series

Touch Screen LCD Monitors

USER’s GUIDE

Important Recycle Instruction:

Lamp(s) inside this product contains mercury. This product may contain other electron-

ic waste that can be hazardous if not disposed of properly. Recycle or

dispose in accordance with local, state, or federal Laws. For more information,

contact the Electronic Industries Alliance at WWW.EIAE.ORG. For lamp speciﬁc

disposal information check WWW.LAMPRECYCLE.ORG.

The information contained in this document is subject to change without notice.

This document contains proprietary information that is protected by copyright. All rights

are reserved. Nopart of this document may be reproduced,translated to another language

or stored in a retrieval system, or transmitted by any means, electronic, mechanical,

photocopying, recording, or otherwise, without prior written permission. Windows is a registered

trademark of Microsoft, Inc.

Other brand or product names are trademarks of their respective holders.

Table of Contents

Usage Notice

Precautions............................................................................................................................. 1

Introduction

About TPM-193 Series ...........................................................................................................2

Touch Screen for TPM-193 Series ............................................................................... 3

Package Overview ...................................................................................................... 4

Installation

Product Overview ........................................................................................................ 5

Front View ............................................................................................................... 5

TPM-193R / TPM-193C Bottom View (Without Stand) .............................................. 5

TPM-193W Bottom View (Without Stand) ................................................................. 6

Kensington Security Slot.............................................................................................. 6

VESA Mount for your Monitor....................................................................................... 7

Start Your Installation .................................................................................................. 8

Remove the Back Cover .......................................................................................... 8

Connecting the Display (Figure 1.1)............................................................................. 9

User Controls

Front Panel Controls...................................................................................................11

How to Use the OSD Menus .......................................................................................12

On-Screen Display Menus ..........................................................................................13

Appendix

Troubleshooting..........................................................................................................14

Warning Signal ...........................................................................................................15

No signal .................................................................................................................15

Going to sleep ........................................................................................................15

Out of range ...........................................................................................................15

Product Dimensions ...................................................................................................16

Compatibility Modes ...................................................................................................17

Touch Screen Driver Installation .................................................................................18

Driver installation process ......................................................................................18

TPM-193R / TPM-193C Driver Install ......................................................................18

TPM-193W Driver Install.........................................................................................19

TPM-193C Optional Capacitive Calibration Tool Install............................................19

Usage Notice

! Warnin

- To prevent the risk o

ﬁ

re or shock hazards, do not expose

this product to rain or moisture.

! Warnin

- Please do not open or disassemble the product as this ma

cause

tri

Precautions

Follow all warnings, precautions and maintenance as recommended in this user’s manual to

maximize the life of your unit.

Do:

• Turn off the product before cleaning.

• Touch screen surface may be cleaned using a soft clean cloth moistened with

mild window glass commercial cleaners or 50/50 mixture of water and isopropyl

alcohol.

• Use a soft cloth moistened with mild detergent to clean the display housing.

• Use only high quality and safety approved AC/DC adapter.

• Disconnect the power plug from AC outlet if the product is not going to be used for

an extended period of time.

Don’t:

• Do not touch the LCD Display screen surface with sharp or hard objects.

• Do not use abrasive cleaners, waxes or solvents for your cleaning.

• Do not operate the product under the following conditions:

- Extremely hot, cold or humid environment.

- Areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic ﬁeld.

- In direct sunlight.

Introduction

About TPM-193 Series

The TPM-193 Series is a 19" ﬂat panel screen with an active matrix, thin-ﬁlm

transistor (TFT) liquid crystal display (LCD).

Features include:

• Direct Analog signal input

• Active matrix TFT LCD technology

• 1280 x 1024 SXGA resolution

• 19" viewable display area

• 31.5 ~ 81 KHz horizontal scan

• 56.3 ~ 75 Hz high refresh rate

• 0.294mm x 0.294mm pixel pitch

• Auto adjustment function

• Multilingual OSD user control

• Kensington security slot

• 100 mm VESA mount

• Removable base for ﬂexible mounting solutions.

• TPM-193R- 5-wire resistive touch screen with dual RS-232 Serial / USB controller

• TPM-193W - SAW touch screen with USB controller

• TPM-193C - Capactive touch screen with dual RS-232 Serial / USB controller

• Built-in speakers-1W x 2

Touch Screen for TPM-193R

• Analog 5-wire resistive touch screen for ﬁnger and stylus input

• Surface: Anti-glare treatment

• Interface: Dual RS-232 Serial/USB controller

• Transmittance: 80±5%

• Driver: Windows®VISTA, XP, 2000, ME, 98, CE, XP Embedded, Linux/Apple®Mac OS

Touch Screen for TPM-193W

• Surface Acoustic Wave (SAW) touch screen for ﬁnger and stylus input

• Surface: Anti-glare treatment

• Interface: USB controller

• Transmittance: 90±5%

• Driver: Windows®VISTA 64/32 bits, XP, 2000, 98

Touch Screen for TPM-193C

• Analog capacitive touch screen for ﬁnger input only

• Surface: Anti-glare treatment

• Interface: Dual RS-232 Serial/USB controller

• Transmittance: 85±5%

• Driver: Windows®VISTA, XP, 2000, ME, 98, CE, XP Embedded, Linux/Apple® Mac OS

Package Overview

LCD Display Power Cord VGA Signal Cable

RS-232 Cable

Quick Start Guide

USB Cable ( A to B) Audio-in Cable

DVI-D Cable

(TPM-193X Series Only)

USB Cable (A to A)

(Option for MSR)

TouchKit CD

DC Power Supply

(sold separately)

Product Overview

• Front View

• TPM-193R / TPM-193C Bottom View (Without Stand)

RS-232

(Option)

VGA IN

AC IN

Audio DVI IN

USB DC IN

• TPM-193W Bottom View (Without Stand)

VGA IN

AC IN

Audio DVI IN

USB DC IN

Kensington Security Slot

The monitor can be secured to your desk or any other ﬁxed object with Kensington lock

security products. The Kensington lock is not included.

VESA Mount your monitor

This monitor conforms to the VESA Flat Panel Mounting Physical Mounting Interface

standard which deﬁnes a physical mounting interface for ﬂat panel monitors, and

corresponding with the standards of ﬂat panel monitor mounting devices, such as wall and

table arms. The VESA mounting interface is located on the back of your monitor.

To mount the monitor on a swing arm or other mounting ﬁxture, follow the instructions

included with the mounting ﬁxture to be used, please note to mount your monitor to the

devices (either mounting ﬁxture or swing arm) what conforms to the UL listed.

! Warning!

Please select the proper screws!

The distance between the back cover surface and the bottom of the screw hole

is 8 mm. Please use four M4 screws diameter with the maximum length of 8

mm to mount your monitor.

Please note the mounting stand shall be able to sustain at least 5Kg weight.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Monitor popolari di altre marche

Linear Acoustic

Linear Acoustic LQ-1000 Manuale utente

AOC

AOC I2579V Manuale utente

Gateway

Gateway FPD1520 Manuale utente

Furuno

Furuno Mu 120c Manuale utente

Asus

Asus VB171D - 17" LCD Monitor Manuale utente

Dell

Dell S2230MX Istruzioni utente

Philips

Philips 107C64 Manuale utente

Dell

Dell S2409WFP Manuale utente

EverFocus

EverFocus EN-7517E Manuale utente

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuale utente

Dell

Dell Precision 7680 Manuale di istruzioni

LG 50PM1M - - 50" Plasma Panel Manuale utente

Bosch

Bosch DDU 9 Manuale utente

Acer

Acer A231HL Manuale utente

Philips

Philips 86BDL4152T Manuale utente

NEC

NEC AccuSync LCD5V Manuale utente

Emay

Emay SleepO2 Manuale utente

IBM

IBM 6360 Istruzioni per l'installazione