2
I. INITIAL INSPECTION
Carefully unpack the instrument and accessories. Inspect for
damages made in shipment. If any damage is found, notify your
Jenco representative immediately. All packing materials should be
saved until satisfactory operation is confirmed.
II. GENERAL INTRODUCTION
The Jenco Model 6350M Handheld pH, mV, Conductivity, Salinity
and Temperature System, is a rugged microprocessor based
instrument designed for use in field laboratories and process control
applications. Using a four-electrode cell for conductivity and a
glass electrode for the pH probe, it becomes an essential tool for
precise measurements of conductivity, pH, salinity, mV and
temperature.
The model 6350M microprocessor allows the user to easily
recalibrate the parameters for the probe. A few keystrokes will
adjust all the parameters for compensated, uncompensated
conductivity and pH and will also give the user the option to select
two types of probe cell constant for a better selection of available
probes and applications. The microprocessor also performs a self-
diagnostic routine every time you turn on the unit providing you
with basic information about the current cell constant and stability
of the instrument.
The system simultaneously displays temperature in °C along with
either Compensated Conductivity, Uncompensated Conductivity,
Salinity, pH or mV. The user can switch back and forth from all
these displays by just pushing a single key.
The model 6350M is also equipped with a non-volatile memory
allowing the user to store 50 different sets of readings. This model
