Jennov H Series Manuale utente
H.2023.041.E
Make sure to read this manual instruction before installing or using the
surveillance camera.
Keep this manual instruction for reference in the future.
Please read carefully before use it
www.jennov.com
U.S Hotline: +13239021978
H SeriesQuick Start Guide
HD WiFi Security Camera
Contact us online
Support : support@jennov.com
Support : support@jennov.com
CATALOGUE
P02
Ajcloud App Installation and Setup
P01
What's Included
P03
Product Overview
Detailed camera information P04
Camera Installation P05
APP Sign Up P07
Connect via QR Code P08
Connect via Hotspot P12
Functions Introduction and Settings P16
About device information P25
Client Viewing P26
Warranty Tips P29
Support : support@jennov.com
- 01 -
Screw PackCamera Power Adapter
Warning StickerSticker User Manual
What's Included
Reset PinCamera E27 3 Prong Light Bulb
Socket to Plug Adapter
User Manual
What's Included
Note: The package list should refer to the list of corresponding camera shape.
Support : support@jennov.com
- 02 -
Ajcloud App Installation and Setup
Search "Ajcloud" on apple store or google play to download the app.
· from Google play
· from Apple store
· or Scan the following QR code
Download App ( IOS/ Android )
Support : support@jennov.com
- 03 -
Product Overview
Antenna
Microphone
Spotlights
Infrared LEDS
Lens
Ambient Light Sensor
Micro SD Card Slot
Reset button Bulb camera is the same
Camera front Camera back
RESET TF
CAUTION: Please insert the Micro SD Card according to the direction shown in
the picture.
If it is not inserted correctly, it may get stuck in the camera.
SD card port: Support micro SD card for local storage (Max 128GB).
Reset button: Used to restore the camera to factory settings
(Press and hold on 5-8s).
Card capacity requirements: 8-128 GB.
Read and write speed requirements: Class10 level.
File format: FAT32.
Support : support@jennov.com
- 04 -
Detailed camera information
Note: Insert the MicroSD card as shown in the figure. If inserted incorrectly, the
MicroSD card will not work properly and may damage the device.
SD card slot: Micro SD card slot for storing recorded files (supports up to 64GB).
Reset button: Used to reset the camera to its factory settings (press and hold for 5-8
seconds).
Card capacity requirements: 8-64GB.
Read and write speed requirements: Class 10.
File format: FAT32.
Infrared and white light
Lens
E27 lamp holder
Wireless module
Microphone head
IR-CUT sensor
TF card slot.
(Note: TF card is also known as microSD card)
Reset button (hole).
Speaker
Support : support@jennov.com
- 05 -
Install the camera 7-10 ft (2-3m) above the ground.This height maximizes the
detection range of motion sensor of the camera. Avoid placing camera direct to sunlight.
Camera Installation
Camera fieldof view
Motion Detection Zone
Up to 30ft ( 10m )
7-10ft
(2-3m)
Select height and location
Tips:
1. Avoid placing the camera in direct sunlight.
2. It is not recommended to use the power extension cable connect the
camera.
3. Before installing the camera, please match the WiFi at home before
installation.
4. The camera must be installed in a 90 degree straight line, and other
installation methods such as upside down, tilt, etc. are not allowed.
5. When installing the camera, try not to look at any place with strong light
source. For example, street lights, glass, sun, green plants within 7-10ft
will directly affect. the definition and night vision effect of the camera.
Support : support@jennov.com
- 06 -
1. Drilling according to position sticker, drill bit:15/64 (6mm)
2. Insert the plugs
3. Tighten the screw
Installation
Power Drill
( not provided ) Drill Bit
Wall
Positioning stickersx
Expansion bolts
Camera
Screw
Test the Wifi signal at installation position
Use cell phone to test Wifi signal quality at the installation position before
installing camera, make sure the Wifi router can provide good Wifi signal.
Support : support@jennov.com
- 07 -
APP Sign Up
1 2 3
1. Open the APP to sign up an account. Go to the login interface, and click "Sign up".
2. Sign up with your email address, and click "Next".
3. Set up a "User Name" and "Password" for your APP, click "Done" and complete.
Support : support@jennov.com
Indice
Altri manuali Jennov Macchina fotografica digitale
