Jensen Eagle 100 Manuale utente
Manual for Eagle 100 and Lynx 500
version 1 - June 2016 - © JensenScandinavia AS
USB cradle usage/ placement
Download driver
Installation of driver in Windows 7 / 8
Installation of driver in Windows 10
Installation of driver in Mac OS X
Installation of driver in Linux
Connect to a wireless network using Windows 7
Connect to a wireless network using Windows 8
Connect to a wireless network using Windows 10
Connect to a wireless network using Mac OS X
Uninstallation of driver in Windows
Uninstallation of driver in Mac OS X
How do I find which driverversion is installed?
.......................................................
...........................................................................
...............................................
..................................................
......................................................
.................................................................
............................
...........................
.........................
............................
.................................................
.................................................
...............................
This manual will help you installing, uninstalling and how to connect to a wireless
network in different operating systems.
......... 2
2
3
4
5
6
7
8
9
10
11
12
13
USB cradle usage / placement
In the giftbox you will find a USB cradle/adapter.
To get the best signal/connection you can use the USB cradle. This will allow you to place the
Eagle 100/Lynx 500 a place where signal receiption is better.
Download driver
On our website you will find the latestwww.jensenscandinavia.com/downloads
driver available for Eagle 100/Lynx 500.
We recommend that you always download the newest driver before installing
Eagle 100/Lynx 500 on your system.
The driverfiles are in zip format and need to be unzipped before you can install it.
In Windows unzipping a file is done by running the file and then select «unzip files»,
then select where you want to unzip the files to (e. g. desktop) and click unzip.
In Mac OS X zip files are unzipped automatically by just running the file.
There will be a new folder in the same folder as the zip file containing the unzipped files.
Page 2
Installation of driver in Windows 7 / 8
Important! Do not connect the until the driver is fully installed.Eagle 100/Lynx 500
* If you have downloaded driver from our webpage you can run the setup.exe from within the folder
you unzipped the driver to.
Insert the CD nowEagle 100/Lynx 500
If the installation is not starting automatically please run the setup.exe file manually.
You will find the setup.exe file by click My computer and select CD (usually D:)
Click Next and wait for the setup to start
Select «Install this driver software anyway»
Windows now needs a restart
Select «Yes, I want to restart my computer now»
The driver for is now installed.Eagle 100/Lynx 500
After restart of Windows you can connect the to the USB port on your PC.Eagle 100/Lynx 500
The new device will be installed automatically and are ready for use after about 30 seconds.
Page 3
Page 4
Installation of driver in Windows 10
Important! Do not connect the until the driver is fully installed.Eagle 100/Lynx 500
* If you have downloaded driver from our webpage you can run the setup.exe from within the folder
you unzipped the driver to.
Insert the CD nowEagle 100/Lynx 500
If the installation is not starting automatically please run the setup.exe file manually.
You will find the setup.exe file by click My computer and select CD (usually D:)
Click Next and wait for the setup to start
Windows now needs a restart
Select «Yes, I want to restart my computer now»
The driver for is now installed.Eagle 100/Lynx 500
After restart of Windows you can connect the to the USB port on your PC.Eagle 100/Lynx 500
The new device will be installed automatically and are ready for use after about 30 seconds.
Installation of driver in Mac OS X
Important! Do not connect the before the driver is installed.Eagle 100/Lynx 500
Insert the driver CD, open Finder and go to the folder Mac -> OS X and open the folder
for your OS X version
* If you have downloaded the driver please run the file installer.pkg to start the installation.
Double click on the file Installer.pkg to start
the installation.
Click Continue and then Continue again.
Click Continue and then Agree
Click Install.
Enter the system password for your mac
and then click Continue Installation.
When the driver is fully installed click Restart
This will initiate a reboot of your mac computer.
When the computer have startet again you can
insert the to your computer.Eagle 100/Lynx 500
Page 5
Installation of driver in Linux
1. Download the latest Linux driver from www.jensenscandinavia.com/downloads
2. Copy the driver to your local folder.
3. Open console
4. Unzip the driver
5. Enter (and click enter)make
sudo apt-get install build-essential6. Enter (and click enter)
7. If you have the Eagle 500 - enter (and click Enter)sudo modprobe 8812au
If you have the Eagle 100 - enter sudo modprobe 8821au (and click Enter)
The driver should now be installed and your is ready for use.Eagle 100/Lynx 500
Page 6
Connect to a wireless network using Windows 7
1
2
5
3
4
6
2
1. Click the icon for wireless network on the system tray
2You will now see a list of available wireless networks in your area.
Select your wireless network from the list.
The name of your AirLink router can be found under the router.
3. Please enter the encryption key for your wireless network and click OK.
The encryption key can be found on top or under the router.
The key is usually 8 digit with a mix of lower / upper case letters and numbers.
4. Select the placement of your network; Home, work or public places
5. Click Close.
6. The PC is now connected to the wireless network. The icon for wireless has
now changed to white to indicate that the connection is working.
This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 7.
In some cases your computer is delivered with a third party software from the computer manufacturer.
If so, please contact the computer manufacturer support for more detailed information.
Page 7
Connect to a wireless network using Windows 8
1
Nettverk
AirLink0F3EB6
á
Nettverk
AirLink0F3EB6
Koble til automatisk
Wi-Fi
Koble til
Flymodus
Av
2
Neste Avbryt
••••••••
Angi sikkerhetsnøkkelen for nettverket
23
Nettverk
AirLink0F3EB6
Wi-Fi
Flymodus
Av
Tilkoblet
5
Nei, ikke aktiver deling eller koble
til enheter
For nettverk på offentlige steder
Nei, ikke aktiver deling eller koble
til enheter
For nettverk på offentlige steder
Nettverk
AirLink0F3EB6
á
Nei, ikke aktiver deling eller koble
til enheter
For nettverk på offentlige steder
Vil du aktivere deling mellom Pcer og
koblet til enheter i dette nettverket?
Ja, aktiver deling og koble til
enheter
For hjemme- eller jobbnetverk
4
1. Click the icon for wireless network on the system tray
2. You will now see a list of available wireless networks in your area.
Select your wireless network from the list and click Connect.
The name of your router can be found under your router.
3. Please enter the encryption key for your Jensen router and click Next.
The encryption key can be found on top or under the router.
The key is 8 digit with a mix of lower / upper case letters and numbers.
4. Please select if you wish to activate sharing of files between devices
in your network.
5.The PC is now connected to the wireless network.
If there are several AirLink routers in your neighbourhood,
it can be several AirLink routers on the list that look similar
Be carefull to select the AirLink router that matches the
network name of your router.
Page 8
This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 8.
In some cases your computer is delivered with a third party software from the computer manufacturer.
If so, please contact the computer manufacturer support for more detailed information.
Connect to a wireless network using Windows 10
1
2
5
3
4
2
1. Click the icon for wireless network on the system tray and then
Network setings
2. You will now see a list of available wireless networks in your area.
Select your wireless network from the list and click Connect.
The name of your router can be found under your router.
3. Please enter the encryption key for your Jensen router and click Next.
The encryption key can be found on top or under the router.
The key is 8 digit with a mix of lower / upper case letters and numbers.
4. Please select if you wish to activate sharing of files between devices
in your network.
5.The PC is now connected to the wireless network.
Page 9
This guide show you how to connect to your Air:Link router based on the built-in wireless tool for Windows 10.
In some cases your computer is delivered with a third party software from the computer manufacturer.
If so, please contact the computer manufacturer support for more detailed information.
If there are several AirLink routers in your neighbourhood,
it can be several AirLink routers on the list that look similar
Be carefull to select the AirLink router that matches the
network name of your router.
Connect to a wireless network using Mac OS X
1) Click the icon for the Wireless network Utility as shown above.
2) Click on the wireless network you want to connect to.
3) Enter the password of the wireless
network and click Join.
4) Open the Wireless network utility again
to see the connection status.
Page 10
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Jensen Adattatore
