Jetson Runner Manuale utente
RUNNER
ELECTRIC BIKE
TABLE OF CONTENTS
What’s in the Box 1
Diagram 2
Features & Specs 3
Attaching the Handlebar 4
Attaching the Front Wheel 5
Attaching the Seat 6
Attaching the Pedals 7
Attaching the Fenders and Reflectors 8
Charging the Battery 9
Operating the Runner 10
Riding the Runner 11
Care and Maintenance 12
Safety Warnings 13
1. WHAT’S IN THE BOX
1. MAIN FRAME
2. FRONT TIRE
3. QUICK RELEASE
4. FRONT REFLECTOR
5. PEDALS
6. SEAT
7. SEAT POST
8. FRONT FENDER
9. REAR FENDER
10. REAR REFLECTOR
11. CHARGER
12. CHARGING CABLE
1 2
345 6 789
10
12
11
Assembling the Runner
should take between 30-35
minutes (including unboxing).
2. DIAGRAM
1
2
3
4
5
8
7
6
1. REAR FENDER
2. SEAT
3. SEAT CLAMP
4. HANDLEBAR
5. FRONT TIRE
6. REAR TIRE
7. PEDAL
8. FRONT FENDER
3. FEATURES & SPECS
• Product Dimensions: 57.5” x 9.65” x 32.7”
• Weight Limit: 300 lbs./ 136 kg
• Product Weight: 38 lbs./ 17 kg
• Recommended Age: 13+
• Tire Size: 26”
• Max Speed: Up To 20 mph/ 32 km/h
• Max Range: Up To 30 miles/ 48 km
• Battery: 36V, 5.2Ah Lithium-Ion
• Motor: 250W Hub Motor
• Charger: 110-240V
• Charge Time: Up To 3 Hours
• Climbing Angle: Up To 20°
• Frame Material: Aluminum Alloy
RUNNER
4. ATTACHING THE HANDLEBAR
4.1 4.2
4.3 4.4
Remove the 4 bolts from the
Metal Guard. Then, remove the
Metal Guard.
First, turn the Handlebar Stem.
Remove the Metal Guard. Place the Handlebar into the
Handlebar Stem. Make sure the
markings on the Handlebar are
centered.
4.5 4.6
Replace the Metal Guard by
tightening the 4 bolts.
Tighten Velcro Cover around
the Handlebar wires.
5. ATTACHING THE FRONT WHEEL
5.1 5.2
5.3 5.4
Remove the plastic protector
from the Fork. Then, lift the
Fork up.
Slide the Front Tire between the
Fork.
Disc
Brake
Disc
Hook the Fork onto both sides of
the tire and slide the Disc Brake
into the Disc.
Quick Release
Spring
Cap
Remove the Cap and one Spring
from the Quick Release.
5.5 5.6
Slide the Quick Release through
the Front Tire. Then, place the
Spring and Cap back onto the
Quick Release.
Tighten the Cap and Lever. Close
the Lever to lock.
Lever
6. ATTACHING THE SEAT
6.1 6.2
6.3
Loosen the Bolt at the bottom of the
Seat post and remove the top plate
and lock nut.
Align the Seat Post with the bars of
the Seat and replace the top plate
and lock nut. Tighten the bolt to lock
the Seat.
Slide the Seat Post into the Seat
Tube. Close the Seat Clamp to secure
the Seat.
Seat Clamp closed
Indice
Altri manuali Jetson Scooter
Jetson
Jetson SLATE Manuale utente
Jetson
Jetson Jupiter JJUP-BLK Manuale utente
Jetson
Jetson JAQUA-GRN Manuale utente
Jetson
Jetson BREEZE JMY3000-BLK Manuale utente
Jetson
Jetson JUPITER Manuale utente
Jetson
Jetson JJRNY-BLU Manuale utente
Jetson
Jetson ESBT-V5 Manuale utente
Jetson
Jetson ESBT-V6 Manuale utente
Jetson
Jetson Horizon Manuale utente
Jetson
Jetson J8 Manuale utente
Jetson
Jetson Orbit Manuale utente
Jetson
Jetson JRACER-BLK Manuale utente
Jetson
Jetson BOLT Manuale utente
Jetson
Jetson Arro Manuale utente
Jetson
Jetson Pinky Manuale utente
Jetson
Jetson Haze Manuale utente
Jetson
Jetson Hex Manuale utente
Jetson
Jetson TWIN Manuale utente
Jetson
Jetson SOLO Manuale utente
Jetson
Jetson Element Manuale utente
