JJ Plus JWAI203 Manuale utente
JWAI203/JWAI204
802.11 b/g/n AP Router
User
Manual
Version
1.6
2
TABLE
OF
CONTENTS
Chapter1Introduction............................................................................................................4
1.1 Package Contents.................................................................................................4
1.2 Features..................................................................................................................4
1.3 Specification...........................................................................................................6
1.4 Physical...................................................................................................................7
Chapter2HardwareInstallation.............................................................................................9
2.1 Overview.................................................................................................................9
2.2 Hardware Installation............................................................................................9
Chapter3PCConfiguration...................................................................................................11
Chapter4System..................................................................................................................13
4.1 Operation Mode Configuration..........................................................................13
4.2 Status....................................................................................................................13
Chapter5WirelessAccessPoint...........................................................................................15
5.1 Operation Mode...................................................................................................15
5.2 Internet Setting.....................................................................................................15
5.3 LAN Setting..........................................................................................................19
5.4 Wireless Setting...................................................................................................21
5.5 Advanced Setting.................................................................................................24
5.6 WMM configuration.............................................................................................26
5.7 WDS configuration..............................................................................................27
5.8 QoS........................................................................................................................30
Chapter6WirelessSecurity..................................................................................................33
6.1 Encryption Setting...............................................................................................33
6.2 WEP-OPEN/SHARED/AUTO............................................................................34
6.3 WPA/WPAWPA2..................................................................................................35
6.4 WPA-PSK/WPA2-PSK/WPA-PSKWPA2-PSK.................................................35
6.5 WPA2.....................................................................................................................36
6.6 802.1x....................................................................................................................37
6.7 MAC Access Control...........................................................................................38
Chapter7WPS......................................................................................................................39
7.1 WPS-PIN setting..................................................................................................39
7.2 WPS-PBC setting................................................................................................39
Chapter
8
Storage.................................................................................................................41
8.1 User admin...........................................................................................................41
8.2 Disk Management................................................................................................42
8.3 FTP Server setting...............................................................................................43
8.4 SAMBA Server setting........................................................................................44
8.5 Bittorrent setting...................................................................................................46
Chapter9SystemManagement............................................................................................50
9.1 Management........................................................................................................50
9.2 Settings backup & restore..................................................................................51
9.3 Firmware Update.................................................................................................53
9.4 Statistic..................................................................................................................54
Chapter10Bridgemode.......................................................................................................55
3
Chapter11AP+Client..........................................................................................................56
Chapter12Client..................................................................................................................57
4
Chapter 1 Introduction
The AP Router is an IEEE802.11 b/g and 11n draft 2.0 AP Router. AP Router is a
multi-function wireless AP Router, it support 1-port WAN 4-port LAN 10/100 BaseT
Switch Hub and 1-port USB Host. This manual describes the details of how to
configuration and manage this equipment.
1.1 Package Contents
Make
sure
that
you
have
the
following
items:
•802.11 b/g/n AP
x
1
•
Power
Adapter
x
1 (12V 2A)
•SMA Antenna
x
2
•
User Manual CD
x
1
•
Quick
Installatio
n
Guid
e
x
1
Note: If any of the above items are missing, contact your supplier or local
dealer as soon as possible.
1.2 Features
InternetFeatures
Internet connection type:
static IP ,DHCP Client ,PPPOE,PPPTP,LITP,3G.
RouterFeatures
DHCP Server and Client.
NAT (Network Address Translation).
ICMP (Internet Control Message Protocol).
IGMP (Internet Group Management Protocol).
DDNS (Dynamic Domain Name Service).
5
WirelessFeatures
Supports WDS, AP, AP Client, Repeater, Bridge mode for wireless
networks.
Compatibility with IEEE 802.11g, 802.11b (2.4GHz) and 802.11n (draft
2.0) standards.
Superior wireless coverage and high performance, up to 300Mbps for
wireless data rates.
Management Features
Firmware upgrade via HTTP.
WAN and LAN side connection statistics.
Configuration of static routes and routing table.
PPP user ID and password.
System Logs.
Security Features
Password protected configuration access.
User authentication (PAP / CHAP) with PPP.
Support 64/128-Bit WEP, WPA-PSK, WPA2-PSK, WPA-RADIUS, WPA2-
RADIUS, WPS and 802.1x.
MAC Access Control.
Support IP tables firewall, MAC / IP / PORT filter, DMZ virtual server, SPI
firewall.
Ethernet Features
Compliant with IEEE 802.3 and 802.3u 10/100 Mbps.
All Ethernet ports support auto-crossover (MDI/MDI-X),1 X WAN port, 4 X
LAN port.
Quality of Service (QoS) Features
IEEE 802.11e QoS.
Wi-Fi Alliance WMM (Wi-Fi Multimedia Enhancement),QoS-WMM support.
External USB Storage Features
1 X USB port (Host).
External USB Storage device.
3G modem card.
1.3 Specification1.3 Specification
CategoryCategory ItemItem DescriptionDescription
Product
General Standards Wireless: IEEE 802.11b/g/n
Ethernet: IEEE 802.3/u (10/100BaseTx)
Data Rate 802.11b: Up to 11 Mbps
802.11g: 54Mbps;
802.11 n:300Mbps
OS Supported Linux
Physical
Spec. Dimension L x W: 140x90mm
Interface 1 x WAN Automatic MDI/MDIX (WAN) –POE
power
4x LAN
Power Jack: 2.1 mm (inner size)
Default Reset Button+ WPS Button
USB (host)
Jtag
UR
LED heater
Antenna Type 1/2 X SMA connecter
Hard Ware
Chipset CPU MIPS 384Mhz: RT3050/RT3052
RF: RT3050/RT3052
PA: JA2508
Memory Flash: 4MB support up to 8MB
SDRAM: 16MB (16bit x1) up to 32MB
LED Power/Status: steady green
WLAN: green for wireless connectivity / activity
WAN Network: green for link; blink for activity
LAN
WPS
USB
High power
Frequency Range
2412 ~ 2462 MHz (N.A)
2412 ~ 2472`MHz (EU)
2412 ~ 2472 MHz (Japan)
Opt. Channel 1 ~ 11 channels (North America)
1 ~ 13 channels (General Europe)
1 ~ 13 channels (Japan)
Emission Type DSSS / OFDM
Output Power 11b/g: 6Mbps@ 23±1.5dbm
36Mbps@22±1.5dbm
48Mbps@21±1.5dbm
54Mbps@20±1.5dbm
Sensitivity of 802.11b
1, 2 Mbps (BPSK, QPSK): - 98 dBm
5.5 Mbps (CCK): - 88 dBm
11 Mbps (CCK): -84 dBm
(typically @PER < 8% packet size 1024 and
@25ºC + 5ºC)
Sensitivity of 802.11g 54Mpbs (64QAM): -74dbm
48Mbps (64QAM): -76dbm
36Mpbs (16QAM): -78dbm
24Mbps (16QAM): -80dbm
18Mbps (QPSK): -81dbm
12Mpbs (QPSK): -82dbm
9Mbps(BPSK): -85dbm
6Mbps (BPSK): -92dbm
(typically @PER < 10% packet size 1024 and
@25ºC + 5ºC)
Frequency Stability within +20 ppm
6
Data Modulation
Type BPSK, QPSK, CCK and OFDM
Power DC or positive POE 12-18V@1A
Maximal Wireless Users 254
Recommended Wireless Users 64
Software
Features Standards & Protocol As Ralink SDK
Security As Ralink SDK
Configuration &
Management As Ralink SDk
Operation mode AP, AP+client, Bridge. Client
Regulation
and
Compliance
US FCC Part 15 class B
Europe ETS 300 328, ETS 301 489-1&17, and CE
Mark
EN 60950, EN 55022 Class B, EN 50082-1
1998
Environment
Spec. Operating Temp 0℃-50℃
Storage 0ºC ~ 50ºC
Humidity 5%~98% non-condensing
1.4 Physical
Front Panel LEDs
Power Show Power on or off.
WAN Show AP Router yes or no connect to DSL modem.
LAN1/2/3/4 Show LAN port is active.
WLAN Show Wireless Radio on or off.
WPS When WPS LED spark then it show WPS-PBC mode is operating and
waiting for Wireless client to authorization requests.
USB Show 3G modem is enable.
Hig er r).
h Pow Show AP Router TX power in High Power mode(Full Powe
7
Back Panel
8
SMA Wireless connector type is SMAJack. Connect external antenna here.
Power Connect the supplied power adapter here.
WAN Port 10/100 BaseT fast Ethernet connector. Connect the DSL or Cable
Modem here. If your modem came with a cable, use the supplied cable.
Otherwise, use a standard LAN cable.
LAN Port 10/100 BaseT fast Ethernet connector. Use standard LAN cables (RJ45
connectors) to connect your PCs to these ports.
Reset Reset yourAP setting to factory default.
WPS WPS-PBC button.
USB External USB port(Host).Connect USB device here.
Chapter 2 Hardware Installation
This chapter is to hardware installation.
2.1 Overview
9
Requirements
Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
Network Interface card (NIC 10/100Base T). Need to install on all PCs.
TCP/IP protocol must be installed on all PCs.
For Internet Access, an Internet Access account with an ISP, and a DSL connection or
3G/3.5G USB modem card.
To use the Wireless Access Point, all Wireless devices must be compliant with the IEEE.
802.11g, IEEE 802.11b or IEEE 802.11n Draft specifications.
2.2 Hardware Installation
A. Choose a place site
Select a suitable place on the wireless environment to place the AP Router.
Notice: For best Wireless reception and performance, the AP Router should
be positioned in a central location with minimum obstructions between the
Wireless Router and the PCs. Also, if using multiple Access Points, adjacent
Access Points should use different Channels.
B. Connect LAN Cables
Use standard LAN cables to connect PCs to the Switching Hub ports on the AP
Router. Both 10BaseT and 100BaseT connections can be used simultaneously.
C. Connect Internet
WAN Port:
Connect the DSL or Cable modem to the WAN port on the AP Router. Use the
cable
supplied with your DSL/Cable modem. If no cable was supplied, use a standard
cable.
USB Port:
Connect the 3G/3.5G USB modem card or USB storage device to USB port on the
AP Router.
D. Power ON
Connect the supplied power adapter to the AP Router. Use only the power adapter
provided. Using a different one may cause hardware damage.
E. Check LEDs
The Power LED should be ON.
The WAN LED should be ON if ADSL line is connected.
The LAN LED should be ON (provided the PC is also ON.)
The WLAN LED should be ON if Wireless PC is connected.
The USB LED may be ON. When 3G modem is connected and dial out.
10
Questo manuale è adatto per i seguenti modelli
1
Indice
Manuali Router di rete popolari di altre marche
NETGEAR
NETGEAR FS526T - Switch Manuale utente
Korenix
Korenix JetNet 5710G Series Manuale utente
Automated Logic
Automated Logic ZN551 Manuale del proprietario
Cisco
Cisco ASR 1000 Series Manuale dell'operatore
EnGenius
EnGenius ESR-9710 Manuale utente
Cisco
Cisco 805 Series Istruzioni operative e di sicurezza