JK Audio BluePack Manuale utente
JK Audio
BluePack™
Wireless interview tool
User Guide
ii BluePack Wireless Interview Tool
Welcome
Thank You
Thank you for purchasing the
JK Audio BluePack. Please read this
guide for instructions on using it.
Getting Assistance
If you have technical or application
questions:
In the US & Canada, call us toll free
at: 800-552-8346
All other countries dial: 815-786-2929
(M-F 8:30-5:00pm Central Time Zone)
Or, check out our FAQ section for
answers to common questions.
Limited Warranty
BluePack is covered by a 2 year
warranty to be free from defective
workmanship and materials. To obtain
service, contact JK Audio by phone
or email for return authorization.
Once authorized, you will carefully
pack and ship the faulty product and
all accessories to us. You will pay
for shipping to us and we will pay for
return back to you.
This warranty does not cover
damages due to accident, weather,
re, ood, earthquake, misuse,
unauthorized repairs or modications,
or damages occurred in shipping, only
defective workmanship or materials.
There are no expressed or implied
warranties which extend beyond
the warranty here made.
Overview iii
Safety Precautions
Use Caution to Prevent
Hearing Loss
BluePack contains a headphone
amplier that is more powerful than
the typical consumer product.
JK Audio products are designed for
the broadcast industry. The broadcast
professional must be able to hear
headphone signals over the ambient
noise level. From the cheering crowd
at a football game to trackside at a
car race, the program material or cues
must be heard at high volumes without
distortion.
Road Safety
Never use headphones while driving
or cycling, etc. It can be dangerous
to turn up the volume even while
walking. Doing so may hinder your
hearing and can be hazardous on the
roadways or at pedestrian crossings.
Note: While BluePack was designed
to be very rugged and durable, it is not
waterproof and care should be taken to
keep the unit dry.
iv BluePack Wireless Interview Tool
Overview vi
Applications 1
Controls & Indicators 2
Getting Connected 4
Bluetooth Wireless Technology
6Bluetooth Status LED
7Pairing
8Master or Headset Mode
9Switching between Master/Headset Mode, Master Mode Streaming
10 Connection History, Disconnecting from a Device, Reconnecting to a Device
6
FAQs 11
Technical Information 14
Contents v
Contents
HD Voice*
Bluetooth Wireless Technology
XLR Mic Input
3.5 Mm Stereo Line Input and Output
¼" Stereo Headphone Jack
>10 Hours on one 9 Volt Alkaline Battery
Features
7 kHz
* HD Voice. While standard phone calls have a narrow bandwidth of 300 Hz to 3.4 kHz, HD
Voice calls offer 50 Hz to 7 kHz bandwidth. The additional 1.5 octaves on the low end gives
voice a more natural sound, while the additional upper octave dramatically improves speech
clarity and intelligibility.
Wireless HD Calls. To take advantage of this extended bandwidth, both phones on the call
must support HD Voice, and both phones must be on the same carrier, in coverage areas
that support HD Voice.
vi BluePack Wireless Interview Tool
Introducing BluePack
JK Audio combines professional audio electronics with a exible communications
interface in a rugged new belt pack design. BluePack™ offers a professional look
and feel to eld reporters and live remote talent.
BluePack™ allows you to perform live man-on-the-street interviews through your
cell phone in HD Voice. BluePack also provides two-way IFB connections through
a cell phone or notebook for truly exible remote monitoring.
HD Voice is available on many third party headsets and cell phones. Interview in
7 kHz audio bandwidth for rich,natural voice clarity.
Connect to cell phones and notebooks through Bluetooth Wireless Technology.
This professional microphone preamp and powerful headphone amplier provide
a vast improvement in sound quality. A 3.5 mm stereo line input jack allows
recordings to be mixed into the broadcast. The 3.5 mm stereo line output jack
provides your full bandwidth microphone signal on the left channel and the return
audio on the right channel.
The stereo headphone output gives you a mix of the XLR microphone input,
3.5 mm input, and return audio. This powerful stereo headphone amplier will cut
through any crowd noise.
Overview
Applications 1
Applications
Live Man-On-the-Street
Broadcasts
Connect your microphone and
headphones to the BluePack, then
establish a Bluetooth connection
to your wireless phone. Dial up the
studio and you are ready to go.
Add prerecorded sound clips or
background music to your interviews
through the Aux Send input.
Telephone Interviews
Call out and interview other people
as part of your pre-game show.
Connect your mic and headphones
as shown and send audio through
the line output to your laptop for live
streaming or to your portable recorder
for later broadcast.
Mic Pre-Amp
Connect your dynamic microphone
to the XLR jack and connect the
line level 3.5 mm output to your
other audio equipment. Use the
thumbwheel on the top of the
BluePack to set the volume level for
the mic input.
BluePack in Master Mode
Congure the BluePack in Master
mode, pair it with a Bluetooth enabled
stereo headset and send stereo audio
to the headset. Tap the <MFB> to
switch to Hands Free mode and have
a full-duplex conversation.
2BluePack Wireless Interview Tool
Controls & Indicators
1 2 3 64 5 7
98
2) Peak Indicator
The peak LED indicates clipping
on the input channel if the level is
set too high. The microphone and
Aux Send are a combined input. If
you see this red LED ashing, you
should decrease the <Mic> and/or
<Aux Send> input levels.
1) Mic Control
Controls the level of your microphone
input.
Controls & Indicators 3
6) Headphones Control
Sets the level of audio sent to the
headphone output jack.
7) Power Indicator
LED indicates when the power is
turned on and dims when the battery
charge is getting low.
8) Multi-Function Button (MFB)
Establish a connection with your
Bluetooth enabled cell phone, laptop
or other device.
9) Power Button
Press to activate the unit. Press again
to turn the unit off.
Controls & Indicators
3) Aux Send Control
Adjusts the level of audio from the
3.5 mm Aux Send input jack.
4) Stereo LED (Listen-Only)
The <st> LED ashes Red when the
BluePack has a stereo listen-only
(Headset) audio connection with your
Bluetooth device.
When you receive an incoming phone
call, the stereo LED will turn off.
This LED will ash Green when the
unit is in Master mode, sourcing
stereo A2DP audio to a Bluetooth
enabled headset device
5) Bluetooth LED
See section on Bluetooth Wireless
Technology.
4BluePack Wireless Interview Tool
2) Stereo Line Level Output
The unbalanced 3.5 mm stereo xed
line level output jack provides your full
bandwidth microphone signal on the
left channel and the Bluetooth audio
on the right channel.
Getting Connected
1) Headphones
Connect your headphones to this 1/4”
jack. The stereo headphone output
gives you a mix of the XLR mic input,
3.5 mm Aux Send input and the
Headset Interface audio.
21 3 4
Altri manuali per BluePack
4
Indice
Altri manuali JK Audio Sistema di conferenza
Manuali Sistema di conferenza popolari di altre marche
Kramer
Kramer VIA GO Manuale utente
AVT
AVT MAGIC AC1 Go Manuale utente
ProSoft Technology
ProSoft Technology AN-X4-AB-DHRIO Manuale utente
Sony
Sony PCS-I150 Manuale utente
Middle Atlantic Products
Middle Atlantic Products VTC Series Manuale utente
Prentke Romich Company
Prentke Romich Company Vanguard Plus Guida
