JKEXER 8010A Manuale utente
Owner's Manual
Made in Taiwan
MOTORIZED TREADMILL
Focus Series (8010A, 8020A, 8030A & 8050A)
Modern 7950
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS P 1
ELECTRICAL GROUNDING INSTRUCTIONS P 2
ASSEMBLY PARTS LIST P 3~4
ASSEMBLY INSTRUCTIONS P 5~6
TREADMILL OPERATION P 7
BASIC INFORMATION P 7
HOW TO OPERATE P 8~12
COMPUTER INSTRUCTIONS P 13~14
ERROR MESSAGE & TROUBLE SHOOTING P 15
HOW TO ADJUST INCLINE p 15
HOW TO FOLD UP FOR STORAGE P 15
HOW TO FOLD DOWN FOR EXERCISE P 15
HOW TO MAINTAIN RUNNING BOARD P 17
HOW TO MAINTAIN RUNNING BOARD BY LIQUID SILICONE P 17
ALIGNING THE RUNNING BELT P 18
ADJUSTING THE RUNNING BELT TENSION P 18
CLEANING AND INSPECTING THE RUNNING BELT
P 19
CLEANING P 19
INSPECT FASTENERS AND WIRING P 19
HOW TO MOVE p 19
STORAGE P 20
HOW TO WORK OUT SAFELY AND EFFICIENTLY P 20
EXPLODED DRAWING P 21-22
PARTS LIST (B O M ) P 23-24
We reserve the right to make change at any time without notice,
in colors, parts and materials.
IMPORTANT SAFETY INSTRUCTIONS
Please read the following basic precautions prior to use of the treadmill:
* Never operate the treadmill with the air openings blocked. Keep air openings
free of lint, hair, and the like.
WARNING
* This treadmill requires a dedicated circuit as 110V/220V 15/10AMP separately that is not
shared by any other electrical appliances. Failure to do so can damage the electronics
and the motor, and will void the warranty.
* To reduce the risk of electric shock, always unplug the power cord from electrical outlet
immediately after using and before cleaning, assembling or servicing.
*Never leave the treadmill unattended when plugged in. Disconnect by turning off the
master power switch and unplugging from outlet.
* Always keep hands and feet off the treadmill while others are using it.
* Never place hands or feet under the treadmill.
* Do not allow children on or around treadmill .
CAUTIONS
* Never operate the treadmill if it has been dropped or damaged, or exposed to water.
Contact with your distributor for service recommendations.
* Before starting any exercise program, it is recommended that you consult your
physician.
* Stop using this appliance if you feel dizziness or discomfort.
* Medical approval and close supervision is necessary when appliance is used by or near
handicapped individuals.
* Use the treadmill only for its intended use as described in this manual.
* Do not pull the treadmill by the power cord or use it as a handle.
* Keep power cord away from heated surfaces and oven flame.
* Do not use or store outdoors.
* Do not operate where aerosol products are being used or where oxygen is being
administered.
* While turning on the power, please stand beside the treadmill, not on the treadmill.
* The weight limit is 300LBS /135KGS (#8030A & 8050A), 265LBS /120KGS (#8010A , 8020A &
7950).
* Do not operate in a wet or moist condition.
* Do not use the treadmill on a carpet that is greater than 1/2 inch in height.
* Do not operate under a blanket. Excessive heating can occur and cause fire, electrical
shock, or injury to persons.
* Never insert any object into any opening on the treadmill.
* Keep the treadmill on a solid, level surface with sides at least two feet from any wall.
Be sure the area around the treadmill remains clear during use and has adequate
clearance, see illustration below.
* Do not walk or jog barefoot or without
shoes.
* Do not walk or jog in loose shoes or slippers.
Athletic shoes are always recommended
while using this treadmill.
* Never walk or jog while wearing loose
fitting, long garments such as slacks
pajamas or dresses.
* When walking or jogging always stay on the
forward part of the treadmill.
* Never jog or walk faster than is comfortable
for you.
* Do not jump up on the treadmill from side
to side.
* Do not place any liquids on any parts of the
treadmill.
If it will not fit your outlet, have a properly
grounded outlet installed by a qualified
electrician.
This unit must be plugged into a nominal 110
volt 60 hz, 15 amp or 220 Volt , 50Hz 10AMP
circuit, which has a grounding plug. Outlets
that service multiple appliances,
or have fluctuating voltage of more than
5%, may result in erratic performance or
cause damage to the treadmill electronics.
Using electrical power other than that which
has been specified will ultimately void any
warranty, implied or otherwise.
Never remove or bypass the electrical
ground contained in the treadmill's three-lug
with an adapter.
The difference in the RPM of motor is +/- 10%
This product must be grounded. If it should
malfunction or break down, grounding
provides a path of least resistance for the
electric current,reducing the risk of electric
shock. This treadmill is equipped with a
cord having an equipment grounding
connector and a grounding plug. The plug
must be plugged into an appropriate outlet
that is properly installed and grounded
in accordance with all local codes and
ordinances.
DANGER
Improper connection of the treadmill
grounding can result in the risk of electric
shock. Check with a qualified electrician if
you are in doubt as to whether the product
is properly grounded. Do not modify the plug
provided with the treadmill.
ELECTRICAL GROUNDING INSTRUCTIONS
* Do not plug into the same outlet with any
other electrical appliance while using this
treadmill.
• Easy assembly by one person
• No cable connection
• Sturdy frame
• Attractive appearance
A
ASSEMBLY PARTS LIST
1. MAIN FRAME .................................. 1
2. SIDE COVER & SCREW
. .......................... 4+4
3. POWER CABLE
................................. 1
A. BOLT & WASHER
. ................................ 6+6
B. BOLT & WASHER
. ............................... 4+4
C. TOOLS ........................................ 2
BC
ASSEMBLY INSTRUCTIONS
STEP 1.:
Fold up the front post. TEP 2:
S
Screw on the bolts &
washers(A) onto the
bottom of the front post.
STEP 3:
Screw on the bolts &
washers(B) onto the back
of the handlebar. TEP 4:
S
Put the side cover onto
the bottom of the front
post, then use the screw
to fix it.
There are balancers at
the front bottom. Adjust
these balancers to make
sure main frame is stably
positioned on the ground
for exercise.
TREADMILL OPERATION
CAUTION:
Before beginning a workout session make sure the safety key is properly placed onto the
computer console and the safety clip is securely attached to an article of your clothing.
Always start the treadmill while standing on the side rails but not on the running belt.
Allow the treadmill to reach a speed of at least 1.0 KPH before walking on the running belt.
Before operating read this page first for familiarization of the treadmill computer console and
other important features.
WARNING
Temperature generates when motor runs. The longer time it runs, the higher temperature it will
generate. Especially when it runs with heavy loading for some time, the temperature will be much
higher. Therefore, in order to lengthen the life of motor, please do remember that every time
after using, let the treadmill run without loading in maximum speed for 5 minutes to blow out high
temperature.
BASIC INFORMATION
1. When safety key is removed:
There is no figure shown on LCD.
2. When safety key is positioned:
It is in MANUAL mode, and all the functions ready for manual operation. You may also press FAST
or SLOW (or UP, DOWN) key to choose P1, P2, P3, P4, P5, ….., P12, U1, U2, H1, H2, H3.
When pressing FAST key, the sequence is P0 (Manual) - P1 – P2 -… - P12 – U1 – … – H3 – P0.
When pressing SLOW key, the sequence is P0 - H3 – H2 - ….. – U1 – P12 – P11 – ….. –P1- P0
Questo manuale è adatto per i seguenti modelli
3
Indice
Altri manuali JKEXER Tapis roulant
JKEXER
JKEXER AeroWork 897 Manuale utente
JKEXER
JKEXER FitLux 665 Manuale utente
JKEXER
JKEXER M-POWER 870 Manuale utente
JKEXER
JKEXER CHEER 465 Manuale utente
JKEXER
JKEXER VIGOR 736 Manuale utente
JKEXER
JKEXER Turbo 776 Manuale utente
JKEXER
JKEXER VIGOR 735 Manuale utente
JKEXER
JKEXER EPIC 823 Manuale utente
JKEXER
JKEXER Turbo 772 Manuale utente
