JLCooper Electronics EclipseCX Midnight Manuale utente

ECLIPSE

Midnight Finish

Color Grading Control Surface

Users Manual

EclipseCX Midnight Finish and EclipseCX are trademarks of JLCooper

Electronics. All other brand names are the property of their respective owners.

Eclipse CX User’s Manual, First Edition

Part Number 932113

2009 JLCooper Electronics, 142 Arena Street, El Segundo, CA 90245 USA

(310) 322-9990 ¬(310) 335-0110 www.jlcooper.com

Table of Contents

Introduction................................................................................... 6

Installation..................................................................................... 7

Unpacking................................................................................... 7

Setup............................................................................................ 7

Connecting the Eclipse CX ......................................................... 7

Configuring the Eclipse CX ........................................................ 8

Configuring the Host Application............................................... 9

Using the Eclipse CX .................................................................. 10

Technical Reference.................................................................... 11

Troubleshooting ........................................................................ 11

Care and Service....................................................................... 14

Introduction

The EclipseCX Midnight is a tactile control surface intended for

color grading applications such as Apple Color.

The EclipseCX Midnight is identical to the EclipseCX with the

following enhancements:

• Darker unit finish with black sides,

• White LED and VFD displays and,

• The addition of six reset pushbutton switches next to the

high resolution encoders above the trackballs.

The unit features a 10/100 RJ-45 Ethernet connector and a DC

power jack. The unit can be power from the supplied power

adaptor or powered from 12 volts DC. LED indicators show status

of Ethernet activity.

Installation

Unpacking

When you receive your Eclipse CX Midnight, you should receive

the following items:

• EclipseCX Midnight

• This Users Manual

• Power Supply

• Power Cord

Please take a moment to register your product at:

http://www.jlcooper.com

This will allow us to notify you of important updates and changes

to software or features.

Setup

The compact design of the Eclipse CX makes it easy to locate

wherever you need it. The Eclipse CX must be setup up in a

location that does not experience vibration, excessive humidity,

dust or temperature extremes.

Connecting the Eclipse CX

Connecting the Eclipse CX is quite straightforward. The Eclipse

CX typically connects to any 10baseT or 100baseTX Ethernet

network.

1. Connect the Eclipse CX to the Ethernet network

2. Connect the included power supply to the Eclipse CX.

Configuring the Eclipse CX

Before using the Eclipse CX, it must be configured properly.

To set initialize the Eclipse CX to factory defaults, perform the

following steps:

1. Holding the Up and Down buttons,

2. switch the Power switch on,

3. release the Up and Down buttons.

The factory defaults are:

IP Address 192.168.254.101

Subnet Mask 255.255.255.0

Gateway 192.168.254.198

To configure the IP address of the Eclipse CX, press SHIFT and

ASSIGN/UTILITY on the Eclipse CX.

To change the IP address or port of the Eclipse CX, perform the

following steps:

1. While the unit is powered, hold down the SHIFT key and

press the ASSIGN/UTILITY button.

2. The current IP Address will be shown in the display. If you

do not wish to change this address, press ENTER.

3. If you wish to change this, press numeric pad keys. This

does not scroll. If you make a mistake, press the CLEAR

button once, and the current number will reappear.

4. When satisfied with the displayed value, press the ENTER

key. The display will then display the Gateway value. If

you don't wish to change this, press ENTER again. Press

ENTER again to step past the Subnet Mask.

5. The Port number will now appear as a five-digit number. If

you do not wish to change it, press ENTER. If you do wish

to change it, it must be entered as a five-digit number. For

instance, if you wish for port #80, you must enter 00080. If

a mistake is made, press the CLEAR button once.

6. After the ENTER key is pressed this last time, the changes

will be made to internal non-volatile memory, and a

message will appear.

As the message indicates, the changes will not take place on the

Ethernet Card until the power has been turned off and back on.

If you cannot access the Eclipse CX, please refer to the

troubleshooting section.

Configuring the Host Application

Now that the IP settings of the Eclipse CX have been set, the host

application must be configured to connect to the Eclipse CX.

To configure Apple Color to connect to the Eclipse CX, refer to

Appendix C, “Setting Up a Control Surface“ in the Apple Color

User Manual.

Using the Eclipse CX

Refer to the user documentation of your host application for details

on how to use the Eclipse CX with your application.

Indice

Altri manuali JLCooper Electronics Controllori

JLCooper Electronics

JLCooper Electronics ES-450 Manuale utente

JLCooper Electronics

JLCooper Electronics FaderMaster 4/100 Manuale utente

JLCooper Electronics

JLCooper Electronics SloMoPro Manuale utente

JLCooper Electronics

JLCooper Electronics ES-SloMo Manuale utente

JLCooper Electronics

JLCooper Electronics MCS-3800 Istruzioni per il montaggio

JLCooper Electronics

JLCooper Electronics Eclipse TX Midnight Manuale utente

JLCooper Electronics

JLCooper Electronics MCS3-SP-RS422 Manuale utente

JLCooper Electronics

JLCooper Electronics ES-SloMoJ Manuale utente

JLCooper Electronics

JLCooper Electronics ES-4/100 Manuale utente

JLCooper Electronics

JLCooper Electronics SloMoPro Manuale utente

JLCooper Electronics

JLCooper Electronics CS-32 MiniDESK Manuale utente

JLCooper Electronics

JLCooper Electronics TransportPro RS422 Manuale utente

JLCooper Electronics

JLCooper Electronics SharpShot Manuale utente

JLCooper Electronics

JLCooper Electronics FaderMaster Professional Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente