JMC SC5C0 N4 HDMI Manuale utente
Product Introduction
Product Brief
SC5C0 N4 HDMI is a high-quality, high-performance capture device which is specially designed for high-
definition video capture applications and live video switching. It supports up to 4 simultaneous HDMI video
inputs with PCIe(x4) connector to connect to the computers PCIe expansion slot.
Specification
3.1. Product Specification
Surveillance Series Hardware Specification
Model
SC5C0N4 HDMI
Max. FPS
1920×1200p@60/50fps in → 1920×1200p@30/25fps out
1920×1080p@60/50fps in → 1920×1080p@60/50fps out
Recording Mode
Hardware Compression, Real-Time Mode
Product photo
Dimension
167.65×104.44 ( mm ) PCIe Full Height
Interface
PCIe×4 ( Gen2 )
Video Input
4×HDMI
Display Video Format
YV12, NV12, YUY2, RGB24, RGB32
Video RAW Data Resolution
1920×1200p@30/25/24fps
1920×1080p@60/50fps
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50fps
1280×1024p@60fps
1280×960p@60fps
1024×768p@60fps
800×600p@60fps
640×480p@60fps
720×480p@60fps
720×576p@50fps
720×480i@60fps
720×576i@50fps
Recording Video Format
H.264 ( Hardware Compression )
Recording Video Resolution
1920×1200p@30/25/24fps
1920×1080p@60/50fps
1920×1080p@30/25/24fps
1920×1080i@60/50fps
1280×720p@60/50fps
1280×1024p@60fps
1280×960p@60fps
1024×768p@60fps
800×600p@60fps
640×480p@60fps
720×480p@60fps
720×576p@50fps
720×480i@60fps
720×576i@50fps
Audio Input
4×HDMI Embedded Audio
PCB Audio Pin Input: 4×Stereo Audio
Audio Format
Stereo / 16-bit / 32000 ~ 48000Hz
I/O
16
WatchDog
✓
Multiple Cards
∞
SDK
Support API : DirectShow, V4L2, FFmpeg, Gstreamer
Support Language : C++, C#, .NET, Visual Basic, Qt, Delphi
System Requirement
OS Support
Windows 7 / Windows 8 / Windows 8.1 / Windows 10
Linux 2.6.14 or Higher ( 32-bit and 64-bit )
Connection Diagram
3.2. Packing List
Item
Amount
SC5C0N4 HDMI Capture Card
1 (piece)
User Guide
1 (piece)
Watchdog cable
0 (piece)
Hardware Installation
Before You proceed
Please note below precautions before any install/uninstall operations:
✓ALWAYS turn off the system before hardware installation/un-installation.
✓ALWAYS unplug the power cord from the wall outlet/socket before hardware installation/un-
installation.
✓ALWAYS touch a safely grounded object or metal object before touching the device.
DO NOT touch any devices before the system is fully off.
DO NOT touch any components on the device, especially ICs on the board.
Card and Driver Installation
Download driver
From
https://www.yuan.com.tw/support/download.htm
Or via link at shop.jmc.se
Step 1: Turn off the system and unplug power cord from wall outlet/socket.
Step 2: Remove the computer system case cover.
Step 3: Plug capture device into an available PCIe slot on motherboard.
Step 4: After hardware installation is completed, then install the driver.
Altri manuali JMC Hardware per computer
Manuali Hardware per computer popolari di altre marche
EMC2
EMC2 VNX Series Manuale del proprietario
Panasonic
Panasonic DV0PM20105 Manuale utente
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuale utente
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuale utente
Raidon
Raidon iT2300 Manuale utente
National Instruments
National Instruments PXI-8186 Manuale utente
