JNC SSF-300 Manuale utente
User Manual
Digital Audio Player SSF-300/302
Thank you for your purchase our product. Please read this manual carefully before use.
MP3/WMA/FM Tuner/Voice Recorder/Mass Storage
FCC Certification
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user authority to operate the equipment.
1
Table of Contents
Key and Features
Function Keys
LCD Window
Basic Operation
Installing Driver (for Win 98 and Win 98SE only)
Listening to music
Operating the FM Tuner
Voice Recording Mode
Navigating Mode
Useful Features
EQ Mode
Repeat Mode
Program Playlist
Setting Mode
Additional Information
Installing Battery
Safe Removal Procedure
Upgrade Firmware
Trouble Shooting
Precautions
Accessories
Technical Specification
Care and Maintenance
1/
2/
3/
4/
2
3
1 / Key Features
Features
u Digital Audio Player
Supports MP3 and WMA.
Supports WAV format (ADPCM Encoding)
u USB interface for upload and download files (compiled to USB 1.1)
u Firmware Upgradeable
Provides the latest updated features via free downloads from our
website and upgradeable to other digital music format if available.
u Full Graphic LCD for displaying information with backlight.
u FM Tuner function with memory function (Preset channel).
u 6 Equalizing Patterns
u FM Tuner recording function.
u Built-in microphone for Voice Recording Function (High Quality,
Normal Quality and Long Play selectable). ADPCM playback
supports additional sampling rates of 12kHz and 24kHz.
u Programmable Music Playlist.
u Low battery level detection.
u The Digital Audio Player will power off automatically if the player is
idle for about 3 minutes.
u Support for Win ME, Win 2000 and Win XP.
2
3
Function Keys
LCD Window
4
5
2 / Basic Operation
Installing Driver (for Win 98 and Win 98SE only)
u The operating system of Microsoft Win98 does not provide a USB mass
storage feature originally. Please go to www.jnc-digital.com for Driver
Download and Driver Installation Procedure.
Remark:
No Driver is required for Win ME, Win 2000 and Win XP. The OS will detect the Audio Player
automatically after plug in the USB port.
Operating with different mode
u The Digital Audio Player can operate with different modes (Music Mode,
FM Tuner Mode, Voice Recording Mode and Navigating Mode). Press
MODE button once for Mode Selection Menu.
u Press 9 or : buttons to switch to different operating mode.
u Press VOL+ to confirm the selection or press VOL- button to exit without
any change.
4
5
Operating with Music Mode
u Insert the earphone plug into earphone jack of the Digital Audio Player.
u Turn on the unit by press and hold ;4 button.
u Press ;4 button again to play music.
u Press ;4 button will pause during playing music.
u Press < button to stop playing music.
u Press VOL+ button to increase the volume.
u Press VOL- button to decrease the volume.
u Press 9 button to select previous music.
u Press : button to select next music.
u Press and hold 9 button for fast reverse function.
u Press and hold : button for fast forward function.
u Slide HOLD switch to lock all buttons, then all buttons will not function.
(In case of stop status of Music Mode or standby status of Voice
Recording Mode, the player turns off automatically.)
u For fast selection on the music stored in the Audio Player, use the
Navigating Mode.
6
7
Operating the FM Tuner Mode
While playing in Music Mode, press MODE button to select FM Tuner Mode
before proceed to the next step.
FM Tuning
u Auto Scanning the whole FM band
= If the PRESET icon is on, then press < button to turn off the PRESET
icon.
= Then press and hold button ;4 to start auto scanning the whole FM
band.
= Each FM station detected will be stored in the 10 preset channel
(previous preset channel will overwrite by new FM station detected)
u Manual Preset FM Band
= If the PRESET icon is on, then press < button to turn off the PRESET
icon.
= Press : to increase FM frequency. The unit will start Auto Scan
function if the : button is pressed and held for a longer time. The
unit will stop when next FM station is detected.
= Press 9 to decrease FM frequency. The unit will start Auto Scan
6
7
function if the 9 button is pressed and held for a longer time. The
unit will stop when previous FM station is detected.
= Press ;4 button once, then STORE and Channel number icons will
be shown on LCD.
= Press : to increase Channel Number.
= Press 9 to decrease Channel Number.
= Press ;4 button again to store this FM frequency in selected
channel number. (The STORE icon will be turned off)
u Operating with Preset Channel
= If the PRESET icon is off, then press < button to turn on the
PRESET icon.
= Press : to increase the preset channel by 1.
= Press 9 to decrease the preset channel by 1.
= To delete the preset channel, then press and hold ;4 button.
8
9
FM Recording
u Press the NAVI/REC button to start recording.
u Press the NAVI/REC button again to stop recording.
u The recorded file is saved as F001.WAV in the FM folder.
u To play a recorded file, press MODE to switch back to MUSIC mode and
select a Tuner file in the TUNER folder, press ;4 button.
Remark: Volume is not controlled during recording
Operating with Voice Recording Mode
u Press the MODE button.
u Press 9 or : to select the Voice Recording Mode.
u Press the NAVI/REC button to start recording.
u Press the NAVI/REC button again to stop recording.
u The recorded file is saved as V001.WAV in the VOICE folder.
u To play a recorded file, press ;4 button
Remark: Volume is not controlled during recording
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali JNC Lettore MP3
