John Lewis 85547820 Manuale utente
TABLE BLENDER
USER GUIDE
2
3 Important safety information
7 About your table blender
8 Before using table blender
8 Using your table blender
10 Cleaning and maintenance
11 Technicalspecications
12 Servicing and disposal
12 Guarantee
Contents
3
Important safety information
Thank you for purchasing this John Lewis & Partners
Table blender.
Please read the instructions and warnings carefully
to ensure a long life for your product and safe usage.
Thisinstructionleaetmustberetainedwiththe
product for future reference. These warnings have
been provided in the interest of safety. You MUST
read them carefully before using the appliance.
If you are unsure of the meaning of any of these warnings,
please contact your nearest John Lewis & Partners
shop or John Lewis & Partners Technical Support on
03301 230106
This appliance shall not be used by children. Keep
the appliance and its cord out of reach of children.
Cleaning and maintenance should not be carried
out by children.
This product is not intended for use by persons
with reduced physical, sensory or mental capabilities,
unless they are properly supervised or given instructions
concerning the safe use of the item by a person
responsible for their wellbeing.
4
- Children must not play with the appliance.
- Do not immerse the cord, plug, or any part of the
appliance in water or other liquids.
- Unplug from the mains when not in use, when
removing or attaching accessories and before
cleaning any part of the appliance.
- Do not operate any appliance with a damaged cord
or plug. Should the item malfunction, or if it is
damaged in any manner, please stop using it and
return it to your nearest John Lewis branch. Do not
attempt to repair it yourself. Do not modify the
appliance plug.
- Do not let the power cord overhang the edge of
the surface on which it stands, or touch anything hot.
- When unplugging the device, hold the plug itself,
not the power cord.
- Do not use the appliance for any purpose other
than its intended use.
- This appliance is for indoor use only. Do not use it outdoors.
- Do not use accessories or attachments that are not
5
recommended by the manufacturer.
- This product is intended for household and light
commercial use.
!
- Always disconnect the Table blender from the supply
if it is left unattended and before assembling,
disassembling.
!
- Do not use the appliance if the blades are damaged.
!
- CAUTION: Ensure that the blender is switched off
before removing it from the stand.
- Switch off the appliance and disconnect from supply
before changing accessories or approaching parts that
move in use.
- Always disconnect the blender from the supply if it
is left unattended and before assembling, disassembling.
6
1 Measuring cup
2 Jar lid
3 Jar
4 Motor unit
5 Smoothie button
6 Auto-clean button
7 Speed knob
8 Base
9 Jar lid latch
10 Handle
11 Ice crush button
12 Light ring
Your table blender
1
2
3
4
5
6
7
8
10
9
11
12
7
Securing the jar lid Step 1
When securing the jar lid onto the
table blender, start by hooking the
plastic lid under the glass spout
of the jar
Step 2
Push the jar lid into the glass jar,
making sure the plastic lid remains
hooked under the glass spout of
the jar
Step 3
Slide the jar lid latch outwards
with one hand, whilst pushing the
jar lid fully into the glass jar
Step 4
Release the jar lid latch, which will
then spring back locking the jar lid
in place
8
1. Unpack the table blender and place all the parts on a horizontal surface.
2. Immerse the jar, the jar lid and the measuring cup in warm soapy
water, then rinse and dry them. Never immerse the motor unit in
water; you risk an electric shock.
!
CAUTION! The blade is very sharp. Please handle it carefully.
For vegetable and fruit juice
1 Placetheblenderonaatsurface.Makesureitisunpluggedand
the speed knob is in the “off” position.
2 Prepare the vegetable or fruit, and place it into the jar. You may
need to add extra water to enable the blender to work properly
and achieve a good consistency. You should never exceed the
maximum level indicated on the jar.
3 Close the jar lid and place the measuring cup into position. If the
jar lid is not closed properly, the blender will not work.
4 Place the jar onto the jar base, and make sure it is installed correctly.
5 Plug in the blender.
6 Turn the speed knob to a speed setting between minimum and
maximum; the light ring will illuminate and the blender will start to
work. Alternatively, you can turn the speed knob to P (pulse) to
blend at high speed.
7 If you wish to add more ingredients to the jar while the blender is
working, you can remove the measuring cup and add them through
the jar lid before replacing the cup.
8 Once the mixture has achieved the desired consistency, turn the
speed knob to the “off” position.
9 Unplug the blender and then remove the jar from the motor unit.
Remove the jar cover, then pour and serve.
!
CAUTION!
- Never use hot liquids or run an empty blender.
- Do not attempt to remove the jar while the blender is working.
Ifyouneedtoremovethejar,turnofftheblenderrst.
- Do not operate the blender for more than 3 minutes at a time,
and allow 5 minute rest time between 2 continuous cycles. If to
operate the blender up to 10 cycles continuously, must rest it for 30
minutes to cool it down to room temperature.
- You must unplug the blender before removing the jar.
!
NOTE
- The Smoothie, Auto clean and Ice crush buttons will not work when
the blender is running under a selected speed setting or the “P” setting.
- When blending solid foods like vegetables or nuts with liquids,
a ratio of 2:3 is recommended. (2 parts solids, 3 parts liquids)
Before you use your table blender
Using your table blender
9
For smoothies
1 Placetheblenderonaatsurface.Makesureitisunpluggedand
the speed knob is in the “off” position.
2 Put the ingredients into the jar. Ensure you have enough liquid
content to create a smooth consistency, but make sure the amount
of ingredients does not exceed the maximum level as indicated
on the jar.
3 Close the jar lid and place the measuring cup into position. If the
jar lid is not closed properly, the blender will not work.
4 Place the jar onto the jar base, and make sure it is installed correctly.
5 Plug in the blender.
6 Turn the speed knob to “on”. All three buttons on the motor unit
will blink.
7 Press the smoothie button. The indicator light will stop blinking
and remain lit, and the blender will start to work.
8 If you wish to add more ingredients to the jar while the blender is
working, you can remove the measuring cup and add them through
the jar lid before replacing the cup.
9 After making the smoothie, the blender will stop working
automatically and the indicators of three buttons will blink again.
10 Unplug the blender and then remove the jar from the motor unit.
Carefully remove the jar cover, and pour and serve.
!
CAUTION!
- Never use hot liquids or run an empty blender.
- Do not attempt to remove the jar while the blender is working.
Ifyouneedtoremovethejar,turnofftheblenderrst.
- Do not operate the blender for more than 3 minutes at a time,
and allow 5 minute rest time between 2 continuous cycles. If to
operate the blender up to 10 cycles continuously, must rest it for
30 minutes to cool it down to room temperature
- You must unplug the blender before removing the jar.
!
NOTE
- You cannot adjust the blender with the speed knob when the
appliance is running under the smoothie mode.
- During the process of making a smoothie, if you want to stop the
blender, you can press the smoothie button again or turn the speed
knob to the “off” position.
10
To crush ice
1 Placetheblenderonaatsurface.Makesureitisunpluggedand
the speed knob is in the “off” position.
2 Place up to eight cubes of 15mm height, length and depth into the
jar, and replace the jar lid and measuring cup. You may need to add
extra water; normally, a good ratio is 2 parts ice to 3 parts water.
Make sure the amount of ingredients does not exceed the maximum
level as indicated on the jar.
3 Close the jar lid and place the measuring cup in position. If the jar
lid is not closed properly, the blender will not work.
4 Place the jar onto the jar base, and make sure it is installed correctly.
5 Plug in the blender.
6 Turn the speed knob to “on”. All three buttons on the motor unit
will blink.
7 Press the ice crush button. The indicator light will stop blinking
and remain lit, and the blender will start to work.
8 After crushing the ice, the blender will stop working automatically
and the indicators of three buttons will blink again.
9 Unplug the blender and then remove the jar from the motor unit.
Carefully remove the jar cover, and serve.
!
CAUTION!
- Do not attempt to remove the jar while the blender is working.
Ifyouneedtoremovethejar,turnofftheblenderrst.
- Do not use the product continuously for more than 3 minutes.
If using continuously for up to 3 minutes, allow a 2 minute rest
period afterwards.
- Allow a 30 minute rest period if using the product for more than
30 minutes at a time.
- You must unplug the blender before removing the jar.
!
Note
- You cannot adjust the blender with the speed knob when the
appliance is running under the ice crush mode.
- During the process of crushing ice, if you want to make the
appliance to stop working, you can press the ice crush button
again or turn the speed knob to the “off” position.
Indice
