Jovision JVS-H411 Manuale utente
JOVISION
Quick Start Guide
JVS-H411
Copyright© Jovision Technology Co., Ltd.
All rights reserved.
TEL: 400-63 -6
http://en.jovision.com
JVS-H411 Quick Start Guide
1
FCC Certification Requirements
Caution: Any changes or modifications in construction of this device which are not expressly
approved by the party responsible for compliance could void the user's authority to operate the
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
The antenna(s) used for this transmitter must be installed to provide a separation distance of at
least 20 cm form all persons.
JVS-H411 Quick Start Guide
2
Statement
Thank you for choosing Jovision, this user manual is intended for users of JVS-H411 network
camera. It includes instructions on how to use the product. The software embodied in the
product is governed by the user license agreement covering that product.
About this Manual
This Manual is subject to domestic and international copyright protection.
Jovision Technology Co., Ltd. (“Jovision”) reserves all rights to this manual. This manual cannot be
reproduced, changed, translated, or distributed, partially or wholly, by any means, without the
prior written permission of Jovision.
Privacy Notice
Surveillance laws vary by jurisdiction. Check all relevant laws in your jurisdiction before using this
product for surveillance purposes to ensure that your use of this product conforms.
Support
Should you have any questions, please do not hesitate to contact your local dealer.
CHANGE THE DEFAULT PASSWORD
Default Network Camera Account :
Username: admin Password: 123456
The default password (123456) for the admin account is for first-time
log-in purposes only. ou should
change this default password to better
protect against security risks, such as the unauthorized access by
others to the product that may prevent the product from
functioning properly and/or lead to other undesirable
consequences.
For your privacy, we strongly recommend changing the password to something of your
own choosing (using a minimum of 8 characters, including upper case letters, lower
case letters, numbers, and special characters) in order to increase the security of your
product.
Proper configuration of all passwords and other security settings is the responsibility of
the installer and/or end-user.
JVS-H411 Quick Start Guide
3
Contents
FCC Certification Requirements ........................................................................................................1
Statement..........................................................................................................................................2
1. Introduction ..................................................................................................................................3
1.1 Appearance and Interface...................................................................................................3
1.2 Specification ........................................................................................................................4
2. Installation.....................................................................................................................................5
2.1 Ceiling Mounting.................................................................................................................5
3. Network Connection ...................................................................... Error! Bookmark not defined.
3.1 Wireless connection............................................................................................................
3.2 Wired Connection ...............................................................................................................
4. Preparation on Smart Phone (iOS, Android) .................................................................................8
4.1 Get CloudSEE APP................................................................................................................8
4.2 Register CloudSEE Account..................................................................................................8
4.3 Power-on the Device ...........................................................................................................8
5. Add H411 on Smart Phone (iOS, Android) ....................................................................................9
5.1 How to Choose Device Adding Methods.............................................................................9
5.2 Add by Sound Wave ............................................................................................................9
5.3 Add Wi-Fi Device on iPhone..............................................................................................11
5.4 Add Wi-Fi Device on Android............................................................................................14
5.5 Add by Device ID ...............................................................................................................15
5.6 Scan devices in LAN...........................................................................................................16
6. Alarm Device ...............................................................................................................................18
6.1 Connection ........................................................................................................................18
Appendix .........................................................................................................................................21
I Packing List and Qualification Card ....................................................................................21
1
Introduction
1.1 Appearance and Interface
JVS-H411 Quick Start Guide
4
1.2 Specification
Image Sensor 1/4″CMOS
Resolution 1280× 20
Pixel 1.0MP
Frame Rate 25fps
View Angle 1°
Focus 3.6mm Fixed
Local Storage 64G
Infrared Lamp 10 LED Lamps
IR distance（m） 10m
Best distance（m） 8m
Temperature -20℃～55℃
Humidity 10%～90%
Power Supply DC 5V
Power ≦3.2W
Material White ABS+PC
Size(W×H×D)(mm) 95×123×122
Weight(g) 300
JVS-H411 Quick Start Guide
5
2
Installation
2.1 Ceiling Mounting
Before you start:
H411 can be installed to wall/ceiling or fixed on desktop. Ceiling mounting is taken as an
example in this section; if you adopt wall mounting, you can also take below procedure as a
reference.
Steps:
1. Attach the mounting base (not
provided) to the ceiling and tighten the
screws to fix it.
2. Use the lock screw to secure the
camera on the mounting base.
Notes:
Please make sure that the ceiling can support more than 50(N) Newton gravities if the camera
is fixed to the ceiling.
JVS-H411 Quick Start Guide
6
JVS-H411 Quick Start Guide
3.1 Wireless connection
Notes:
With wireless connection, you can add the device by “Add Wi Fi Device”, which is based on AP
function. Once you connect H411 to the router with Ethernet cable, H411 will disable AP,
which means the function mentioned above won’t work.
3.2 Wired Connection
Notes:
“Add Wi Fi Device” does not apply to wired connection.
JVS-H411 Quick Start Guide
8
4
Preparation on Smart Phone (iOS, Android)
4.1 Get CloudSEE APP
1. Search “CloudSEE” in App Store (iOS) or Google play (Android).
2. Get and install CloudSEE on your smart phone.
4.2 Register CloudSEE Account
Notes:
You need to register a CloudSEE account before using CloudSEE service which is free. Although
you can use “Visitor Login”, but we strongly recommend that register your own account for
better experience. With CloudSEE service account, devices list will automatically upload and
store in cloud, and when you login CloudSEE with your account on other smart phones, you
can access to all these devices without adding them again.
1. Open CloudSEE App, and tap “Register” on
Login Page.
2. Input your E-mail and password, make sure
the E-mail has not been registered, tap
Register, account will login automatically if the
register succeed.
4.3 Po er-on the Device
Connect H411 with power adapter, the device starts self-checking, it will pan and tilt for about
10 seconds. After that, we can start.
JVS-H411 Quick Start Guide
9
5
Add H411 on Smart Phone (iOS, Android)
Before you start:
The device has to be configured by “Add by Sound Wave” or “Add Wi Fi Device” for first-time
use if you want to use wireless connection.
Press reset button for about 3 seconds and release to start sound wave configuration
Press reset button for about 15 seconds and release to reset the device.
All the operations are with audio prompts.
5.1 Ho to Choose Device Adding Methods
Methods Situation Connection
Add by CloudSEE ID The device had been connect to Internet
and get CloudSEE ID online. Wireless, Ethernet Cable
Scan QR Code
The device had been connect to Internet
and get CloudSEE ID online.(The same as
“Add by CloudSEE ID”)
Wireless, Ethernet Cable
Add Wi-Fi Device First-time use or the device has been
reset. Wireless
Scan Devices in LAN The device has been connected to the
same network as your smart phone. Wireless, Ethernet Cable
Add by sound wave First-time use or the device has been
reset. Wireless
5.2 Add by Sound Wave
Notes:
Set the volume of your phone to maximum level before this operation.
Make sure there is no noise when add the device by sound wave.
Keep the speaker of your phone close enough to the MIC of the device when sound wave
is playing
Select the network which your phone joined,
①
①①
①
②
②②
②
Altri manuali per JVS-H411
1
Indice
Altri manuali Jovision Telecamera di sicurezza
