Joy Automatic JT-188 Manuale utente
CHILDREN’S
ELECTRONIC TOY CAR
OWNER’S MANUAL
• Suitable for 37~96 months
•Maximum user weight: 30kg
•Adult assembly required
Please keep this manual for future reference as it contains important
information.
Before rst time use, charge the battery for at least 8-12 hours.
Read and understand this entire manual before using!
37~96 monthes
A
B
1
1
1
2
2
4
2
2
1
1
1
1
1
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
A
B
1
1
2
1
1
2
2
1
1
\
1
1
On the purchase of your new Ride-On.
This ride-on car will provide your child with many miles of riding of
enjoyment. To help assure you and your rider a safe ride we ask you to
please read this manual carefully, and keep it for future reference.
Follow the recommendations in this manual, they are designed to improve
the safety and operation of your ride-on car and it’s rider.
Suitable age:
Battery:
Charge time:
Charge:
Load capacity:
Size of car:
Speed:
6V 4.5AH or 7AH x1
8~12 hours
Under 30kg
3 km/h
112 x 52 x 73 cm
NO. PART NAME
Q’TY
(PCS)
REMARK
NO. PART NAME
Q’TY
(PCS)
REMARK
Vehicle body
Gear box
Rear wheel
Bushing
Φ11 washer
Wheel cover ring
Wheel cover
Vehicle body board①
Vehicle body board②
Front fender
Front wheel
Faceguard
Rear axle
Mirror
Seat
Handle bar
Split pin
Toolbox base
Toolbox cover
15MM steel wire
Toolbox connector
Φ5 nut
M5x60 machine screw
Armrest
Charger
Remote controller
About Your New Vehicle
Parts List
2WD x2
2WD x2
2WD x2
2WD x1
Input: depend on local voltage Output:DC 6V500ma
1
2
3
4
5
22
23
10
16
18
24
17 9
11
12
13
14
15
8
6
7
A
B
1
2
3
4
5
22
2
2
3
0
10
1
6
18
2
24
17
9
1
1
1
2
3
1
3
4
1
4
15
8
6
7
A
20
19 21
2
C
NOTE: Some parts shown are assembled on both sides of vehicle
Parts Diagram
1
2
3
DAssembly
WARNING:
• CHOKING HAZARD! Not suitable for children under 36 months.
• ADULT ASSEMBLY REQUIRED.
Turn the vehicle body upside down.
1. Insert the rear axle into the hole in
the vehicle body.
2. Fit the front fender to the front wheel.
2
3
4
5
6
7
8
910
12
11
13 14 15 16
1
4
DAssembly
1. Fit the gear box onto the rear
axle from the Left Side.
2. Slide a wheel onto the rear axle.
and make the wheel match with the
bushing.
3. Slide another bushing, and make
it match with the wheel also.
4. Slide a Φ10 washer onto the rear axle.
5. Insert a split pin into the hole at the end of the
rear alxe, bend the ends of split pin back using a
long nose pliers.
6. Fit the wheel cover ring to the wheel cover.
7. Fit the wheel cover to the wheel.
9. Slide a Φ10 washer onto the rear axle.
10. Slide a iron tube onto the rear alxe.
11. Slide a wheel onto the rear axle.
12. Slide a bushing onto the rear axle. Also make it match with the wheel.
13. Slide a Φ11 washer onto the rear axle.
14. Insert a split pin into the hole at the end of the rear alxe, bend the ends of split
pin back using a long nose pliers.
15. Fit the wheel cover ring to the wheel cover.
16. Fit the wheel cover to the wheel.
1WD
9
10 11 12 13 14
2
3
4
5
6
71
9
1010
1
11
1
2
1
2
1
3
1
3
1414
8
8. Repeat the same steps(1-7) for the other rear wheel.
5
D
Assembly
1. Fit the gear box onto the rear
axle from the Left Side.
2. Slide a wheel onto the rear axle.
and make the wheel match with the
bushing.
3. Slide another bushing, and make
it match with the wheel also.
4. Slide a Φ10 washer onto the rear axle.
5. Insert a split pin into the hole at the end of the
rear alxe, bend the ends of split pin back using a
long nose pliers.
6. Fit the wheel cover ring to the wheel cover.
7. Fit the wheel cover to the wheel.
2WD
1
6
D
2
2
3
4
656
Assembly
Turn the vehicle body on its side.
1. Insert the front wheel assembly into the
hole in the vehicle body.
2. procedure 2 only for the vehicle
with the remote control function.
Line up the lower hole in the steering column
with the hole in the steering gear box, insert the
M5x25 machine screw and tighten a Ø5 nut on the
opposite to secure the steering wheel to the steering column.
3,4 Plug the connectors into each other.
5. Fith handle bar to the end of the steering column.
6. Insert the M5x60 machine screw and tighten a Ø5 nut on the
opposite to secure the handle bar to the steering column.
1
x10
2
3
4
4
4
4
44
7
D
Assembly
1. Fit the vehicle board vehicle body board①to the vehicle body,
2. Tighten ten Ø4x18 screws to secure the vehicle body board①to the vehicle
body.
1. Fit the vehicle board vehicle body board②to the vehicle body,
2. Tighten six Ø4x18 screws to secure the vehicle body board②to the vehicle body.
x4
3
5
4
6
1
2
6
DAssembly
1. Turn the toolbox cover
downside up. Fit the toolbox
connector to the toolbox
cover.
2 .Insert the15mm steel wire
to secure the toolbox
connector the toolbox cover.
Repeat the other side.
3. Fit the armrest to the toolbox base
4. Tighten four Ø4x12 screws to secure the
armrest the toolbox base.
5. Insert the tabs in the toolbox connector
into the holes in the toolbox the toolbox
cover.
6. Insert the tabs in the toolbox
connector into the holes in the
toolbox the toolbox cover.
Assemble the toolbox with armrest Assemble the toolbox
without armrest
x4
1
2
7
D
Assembly
Turn the vehicle body upright.
1. Keep the toolbox opening, and fit it the
vehicle body.
2. Using four Ø4x12 screw to secure the
toolbox to the vehicle body with a
screwdriver.
Indice
