JPS IRIS-IMSV Manuale utente

IRIS-IMSV DRIVER

USER MANUAL

Version：V5.03

Safety Precautions and Warnings!

CAUTION! WARNING! !

Pay attention to these CAUTION, WARNING, and ! signals on the device or instruction documents.

They indicate danger to human body or damage to the device. Before installing and putting the device into

operation, please read the safety precautions and warnings following this page.

1. Make sure that the warning signs are kept in a legible condition and replace missing or damaged signs.

2. Before starting, familiarize yourself with the operation of the inverter. It may be too late if you start

working with the inverter before read this instruction manual.

3. Never permit unqualified personnel to operate the inverter.

! WARNING!

zThis inverter produces dangerous electrical voltages and controls rotating mechanical parts.

zDeath, severe injury or substantial damage to property can occur if the instructions in this operating

manual are not completed with.

zOnly personnel with appropriate qualifications should work with this inverter. These personnel must be

familiar with all the warning signs and precautions laid out in these operating instructions for the

transport, installation and operation of this device.

zThe successful and safe use of this inverter depends on the correct installation, commissioning,

operation and maintenance of the device.

zThis device operates at high voltages.

! CAUTION!

zThe DC-link capacitors remain charged to dangerous voltages even the power is removed. For this

reason it is not permissible to open the inverter cover until five (5) minutes after the power has been

turned off.

zWhen handling the open inverter it should be noted that live parts are exposed. Do not touch these live

parts.

zThe terminals R, S, T, U, V, W, P, N, B, PR, and BR can carry dangerous voltages even if the motor is

inoperative.

zOnly qualified personnel may connect, start the system up and repair faults. These personnel must be

thoroughly acquainted with all the warnings and operating procedures contained with this manual.

zCertain parameter settings may cause the device to start up automatically after power on or power

recover.

DEFINITIONS

zQualified Person

For the purposes of this manual and product labels, a qualified person is one who is familiar with the

installation, construction, operation and maintenance of this device and with hazards involved. In

addition, the person must be:

Trained and authorized to energize, de-energize, clear, ground and tag circuits and equipment in

accordance with established safety practices.

Trained in the proper care and use of protective equipment in accordance with established safety

practices.

www.jps.com.tw

Trained in rendering first aid.

zDANGER

For the purposes of this manual and product labels, DANGER indicates that loss of life, severe personal

injury or substantial property damage WILL result if proper precautions are not taken.

zWARNING

For the purposes of this manual and product labels, WARNING indicates that loss of life, severe personal

injury or substantial property damage CAN result if proper precautions are not taken.

zCAUTION

For the purpose of this manual and product labels, CAUTION indicates that minor personal injury or

property damage CAN result if proper precautions are not taken.

zNOTE

For the purpose of this manual and product labels, NOTES merely call attention to information that is

especially significant in understanding and operating the inverter.

! DANGER and WARNING

zMake sure that the location selected for installation is safe, protected from moisture and splash and

drip-proof!

zChildren and the general public must be prevented from accessing or approaching the equipment!

zThe equipment may only be used for the purpose specified by the manufacturer. Unauthorized

modifications and the use of spare parts and accessories that are not sold or recommended by the

manufacturer of the equipment can cause fires, electric shocks and injuries.

zKeep these operating instructions within easy reach and give them to all users!

! WARNING

This is a Class A product. In a domestic environment this product may cause radio interference in which case

the user may be required to take adequate measures.

www.jps.com.tw

Contents

1.Production Introduction...................................................................................................................... 7

1.1 Check Items...................................................................................................................................................................... 7

1.2 Description of Nameplate Content ............................................................................................................................. 7

1.2.1 The Label on the Packing Case ............................................................................................................................. 7

1.2.2 The Driver Rating Label.......................................................................................................................................... 8

1.3The Specification of IRIS Series ..................................................................................................................................... 9

1.3.1The Rating .................................................................................................................................................................. 9

1.3.2 The Specification of Hardware............................................................................................................................ 10

2.Condition of Storage Environment .................................................................................................11

3.Attention of Installation.....................................................................................................................11

4.Outline Dimension ..............................................................................................................................12

5.Description of Wiring..........................................................................................................................13

5.1Power Terminal .............................................................................................................................................................. 13

5.1.1The Power Input Terminals (R, S, T) .................................................................................................................... 13

5.1.2The Output Terminals (U, V, W to Motor) .......................................................................................................... 13

5.2The Control Signal Terminals ...................................................................................................................................... 13

5.3 Brake Resistor Terminals ............................................................................................................................................. 14

5.4 The Input Reactor.......................................................................................................................................................... 15

5.5The Proper Screw Drive for Power Terminals........................................................................................................... 16

6.Basic Wiring Diagram for IRIS Series Drive.....................................................................................17

7. I/O Interface.........................................................................................................................................18

7.1The Map of I/O Terminal Position...............................................................................................................................18

7.1.1【0.5~2HP】Input/Output terminal on front side： ...................................................................................... 18

7.1.2【0.5~2HP】 Input/Output terminal on back side：..................................................................................... 19

7.1.3【3~30HP】Input/Output terminal on front side： ....................................................................................... 20

7.1.4 Definition of control signals ................................................................................................................................ 20

7.2 CON6 Comm., DI/O, AI, AM, PG_in, PG_out, XY_in Description.......................................................................... 21

7.3 XY Signal Input Description........................................................................................................................................ 23

8.Quick Start ............................................................................................................................................24

8.1Run Command Set from Digital Input Terminals .................................................................................................... 24

Step II Start to Run....................................................................................................................................................... 24

8.2 RUN Command Set from Control Panel.................................................................................................................... 25

8.2.1 R-Panel operation method： .............................................................................................................................. 25

8.2.2 C-Panel operation method：.............................................................................................................................. 25

8.3 Change the Definition of Motor’s Direction ......................................................................................................... 25

9.Parameter Description .......................................................................................................................26

9.1 IRIS-IMSV Parameter List ............................................................................................................................................. 26

9.2 Monitor Type Parameters’ Address........................................................................................................................ 32

www.jps.com.tw

9.3Parameter’s Type ........................................................................................................................................................ 32

10. IRIS-IMSV Parameter Description .................................................................................................33

10.1 Driver Specification Group........................................................................................................................................ 33

10.2 Digital Input Group .................................................................................................................................................... 35

10.3 Digital Output Group................................................................................................................................................. 36

10.4 Analog Input Group ................................................................................................................................................... 37

10.4.1 Analog Input：AI1............................................................................................................................................... 37

10.4.2 Analog Input：AI2............................................................................................................................................... 38

10.5 Analog Output Group................................................................................................................................................ 41

10.6 Encoder Sensor Group............................................................................................................................................... 44

10.7 IMSV Motor Group...................................................................................................................................................... 45

10.8 IMSV Control Group.................................................................................................................................................... 46

10.9 IMSV Multi-Speed Setting Group ............................................................................................................................ 52

10.10 IMSV Acc/Dec/S-curve Group................................................................................................................................. 53

10.11 DC-BUS Adjust Group .............................................................................................................................................. 56

10.12 Thermistor Adjust Group ........................................................................................................................................ 56

10.13 FAN Adjust Group..................................................................................................................................................... 57

11. Digital Input Function.....................................................................................................................58

12. Digital Output Function..................................................................................................................63

13. Flip-Flop Function Description......................................................................................................65

13.1 Pulse-Couter Group.................................................................................................................................................... 65

13.1.1 Pulse-Counter Parameters................................................................................................................................. 65

13.1.2 Pulse-Counter Digital Input...............................................................................................................................65

13.1.3 Pulse-Counter Digital Output ........................................................................................................................... 65

13.2 FlipFlop Group............................................................................................................................................................. 66

13.2.1 FlipFlop Group Parameters ...............................................................................................................................66

13.2.2 FlipFlop Group Digital-Input............................................................................................................................. 66

13.2.3 FlipFlop Group Digital-Output.......................................................................................................................... 66

13.2.4 General Flip-Flop ................................................................................................................................................. 67

13.2.5 D-Type Flip-Flop .................................................................................................................................................. 68

13.2.6 T-Type Flip-Flop................................................................................................................................................... 69

13.3 Timer Group................................................................................................................................................................. 70

13.3.1 Timer Group Parameters.................................................................................................................................... 70

13.3.2 Timer Group Digital-Input................................................................................................................................. 70

13.3.3 Timer Group Digital-Output.............................................................................................................................. 70

13.3.4 Timer Function (Delay Off Mode)..................................................................................................................... 71

13.3.5 Timer Function (Delay On Mode)..................................................................................................................... 71

13.3.6 Timer Function (Auto On/Off Mode) ............................................................................................................... 72

13.4 Speed Compare Group .............................................................................................................................................. 73

13.4.1 Speed Compare Group Parameters................................................................................................................. 73

13.4.2 Speed Compare Group Digital-Input .............................................................................................................. 73

www.jps.com.tw

13.4.3 Speed Compare Group Digital-Ouput............................................................................................................. 73

13.5 Speed Up / Down Counter........................................................................................................................................ 74

13.5.1 Speed Up/Down Counter Parameters............................................................................................................. 74

13.5.2 Speed Up/Down Counter Digital-Input .......................................................................................................... 76

13.5.3 Speed Up/Down Counter Digital-Ouput ........................................................................................................ 76

13.5.4 PulseType-Speed Up/Down Counter .............................................................................................................. 77

13.5.5 Level Type-Speed Up/Down Counter.............................................................................................................. 78

13.6 Rotary Switch Group .................................................................................................................................................. 79

13.6.1 Rotary Switch Group Parameters..................................................................................................................... 79

13.6.2 Rotary Switch Group Digital-Input .................................................................................................................. 79

13.6.3 Rotary Switch Group Digital-Output............................................................................................................... 80

13.7 PID Function ................................................................................................................................................................ 81

13.7.1 PID Function Parameters................................................................................................................................... 81

13.7.2 PID Function Digital-Input................................................................................................................................. 83

13.7.3 PID Function Digital-Output ............................................................................................................................. 83

13.7.4 PID Function Block .............................................................................................................................................. 83

14. PCMD Mode.......................................................................................................................................84

14.1 PCMD Rule.................................................................................................................................................................... 84

14.2 PCMD Connection....................................................................................................................................................... 84

14.3 PCMD Function Block................................................................................................................................................. 85

14.4 PCMD Function Group............................................................................................................................................... 86

14.4.1 PCMD Group Parameters................................................................................................................................... 86

14.4.2 PCMD Group Digital Input................................................................................................................................. 88

14.4.3 PCMD Group Digital Output.............................................................................................................................. 88

14.5 PCMD Function Basic Example ................................................................................................................................ 89

14.5.1 PCMD Parameter Setting................................................................................................................................... 89

14.5.2 PCMD Start............................................................................................................................................................ 89

15. Alarm Message and Maintenance ................................................................................................90

15.1 Display of Alarm Message......................................................................................................................................... 90

15.2 Maintenance of Alarm Message .............................................................................................................................. 90

16. CE Certificate.....................................................................................................................................94

16.1 EMC Certificate............................................................................................................................................................ 94

16.2 LVD Certificate............................................................................................................................................................. 95

17. Control Panel Description ..............................................................................................................96

17.1 C-Panel Operational ................................................................................................................................................... 96

17.1.1 Lock and unlock................................................................................................................................................... 96

17.1.2 Change mode....................................................................................................................................................... 96

17.1.3 Monitor mode ...................................................................................................................................................... 96

17.1.4 Use the fly wheel function in the monitor mode.......................................................................................... 97

17.1.5 Parameter mode (select, read, edit, write)..................................................................................................... 98

17.1.6 RESET Function .................................................................................................................................................... 99

www.jps.com.tw

17.2 R-PANEL Operational ...............................................................................................................................................100

17.2.1 Control Mode 【CTL MODE】........................................................................................................................100

17.2.2 Monitor Mode 【MON MODE】 ....................................................................................................................100

17.2.3 Parameter Editing Mode 【PAR MODE】....................................................................................................101

17.2.4 ALARM MODE【ALM MODE】........................................................................................................................101

17.2.5 RD / WT【Single-Word】/【Double-Word】Parameters .........................................................................102

17.2.6 Single-Word】/【Double-Word】Negative Numbers...............................................................................103

17.2.7 Alarm Mode of R-Panel【ALM Code Description】 ...................................................................................104

17.2.8【Definition of Cables】 ...................................................................................................................................104

1.Production Introduction

1.1 Check Items

To avoid the carelessness during packing and delivery, please check the list below carefully。

Items Amount Contents

IRIS IMSV Manual 1 book Please read carefully and keep with care for referring usage.

IRIS IMSV Driver 1 set

Check the spec. of the device with the case label is same or not.

Check the out looking of the device to make sure that there is no defect on it.

All screws should be tighten and exist.

Encoder

Feedback cable

1 set Make sure content in the package(cable had been tested before packing)。

※Attached only when driver rated current higher than 11A

If any miss or defect happened, please contact with the agency to get resolve of the problem.

1.2 Description of Nameplate Content

1.2.1 The Label on the Packing Case

2R5-IMS

-PCMD-A-

220V

The contents of indication:

1. 2R5 Æ Indicates that this driver should access 220 Volt power and the rated output is 5A.

2. IMSV Æ Suit for Induction motor with encoder feedback.

3. PCMD Æ Stndard type. Pulse Command Mode embedded.

4. A Æ Indicates that this driver is an Advanced type.

5. R Æ Indicates that the control panel of this driver .

Description of Control Panel

C C-Panel

R R-Panel

6. 220V Æ Indicate the suitable power rating individually.

www.jps.com.tw

1.2.2 The Driver Rating Label

The figure below is a sample of the rating label that is put on the outside of the driver.

MODEL 2R5-IMSV-PCMD-A-C

INPUT AC 3ψ220V / 50/60HZ

OUPUT 3ψ5A/ 2KVA/ 0~400HZ

Serial NO 080A0001

MADE IN TAIWAN

The contents of rating label are showed below:

2 : 220VAC

Input voltage 4 : 380VAC

Model series R : IRIS Series

Output current According to Driver-Current

Suit motor IMSV : Induction Motor Type

Firmware Standard

Function Factory Only

Panel R Panel

MODEL：2 R □ - IMSV- STD - A- R

Power-Type A.C. 1 or 3 Phase, 220Volt.

Power Frequency 50Hz/60Hz

INPUT ：AC3Ø220 / 50/60HZ

Phase / Current 3Phase/5A

Capacitance (KVA) 2KVA

Output Frequency Range 0 ~ 400HZ

OUTPUT : 3Ø5A 2KVA / 0~400Hz

www.jps.com.tw

1.3The Specification of IRIS Series

1.3.1The Rating

220V Series：

2R□ 2 3P5 5 7 11 17 24 33 46 61 90

Output Current 2 3.5 5 7 11 17 24 33 46 61 90

Horse Power(HP) 0.5 1 1.5 2 3 5 7.5 10 15 20 30

Rated Capacity(KVA) 0.65 1.3 1.8 2.5 4.0 6.5 9.5 13 19 25 34

Rated Power(KW) 0.4 0.75 1 1.5 2.2 3.7 5.5 7.5 11 15 22.5

Max Output Voltage(V) Match 3 phase Input Voltage

Dimension P1 P2 P3 P4

380V Series：

4R□ 5P5 8P5 12 17 23 31 45

Output Current(A) 5.5 8.5 12 17 23 31 45

Horse Power(HP) 3 5 7.5 10 15 20 30

Rated Capacity(KVA) 4.0 6.5 9.5 13 19 25 34

Rated Power(KW) 2.2 3.7 5.5 7.5 11 15 22.5

Max Output Voltage(V) Match 3 phase Input Voltage

Dimension P2 P3 P4

Indice

Altri manuali JPS Controllori

JPS

JPS Z2 Controller Manuale utente

Manuali Controllori popolari di altre marche

Digiplex

Digiplex DGP-848 Istruzioni operative

YASKAWA

YASKAWA SGM series Manuale utente

Sinope

Sinope Calypso RM3500ZB Manuale utente

Isimet

Isimet DLA Series Style 2 Manuale di installazione

LSIS

LSIS sv-ip5a Manuale utente

Rockwell Automation

Rockwell Automation 1769-L31 Manuale utente

Airflow

Airflow Uno hab Manuale utente

ABB

ABB ACS580-01 drives Manuale utente

Panasonic

Panasonic GM1 Series Manuale utente

Emerson

Emerson SW93 Manuale utente

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuale utente

Panasonic

Panasonic FP? Positioning Unit RTEX Manuale utente

Samson

Samson Type 5824 Manuale di servizio

Alpha IP

Alpha IP MIOB 21001 Manuale utente

Siemens

Siemens OpenAir GMA 1 Series Manuale utente

Surecom

Surecom SR-629 Manuale utente

Fishman

Fishman TriplePlay Manuale utente

Regulus

Regulus SRS1 T Manuale utente