JuicedLink DN101 Manuale utente

juicedLink

User’s Manual

DN101 – Accessory for CX Family of Low-Noise Preamps

Page 2 www.juicedLink.com

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

Con en s

Con en s.......................................................................................................................................2

Read This Firs .............................................................................................................................3

Warnings - General ...................................................................................................................3

Checking Supplied I ems .........................................................................................................3

General.........................................................................................................................................4

Fea ures....................................................................................................................................4

Panel Descrip ions ...................................................................................................................4

Se ing up DN101 wi h he CX Preamp........................................................................................6

Bol ing he DN101 o he CX Preamp.......................................................................................6

Ba ery Tray Modifica ion ........................................................................................................8

Opera ion....................................................................................................................................12

Powering.................................................................................................................................12

Inpu / Ou pu Connec ion ......................................................................................................12

Normal Opera ion ...................................................................................................................12

AGC Disable Opera ion...........................................................................................................13

No es on Specific Cameras .......................................................................................................15

Canon 5D MarkII, 7D, 1D Mark IV...........................................................................................15

Panasonic Lumix GH1 ............................................................................................................15

Nikon D300s, D3s ...................................................................................................................15

Appendix ....................................................................................................................................16

Subscribe o he juicedLink Blog ...........................................................................................16

Care and Main enance ...........................................................................................................16

Warran y, Service, and Re urns .............................................................................................16

Compliance.............................................................................................................................16

DN101 – Accessory for CX Family of Low-Noise Preamps Page 3

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

Read This Firs

Before operating the unit, please read this manual thoroughly.

Any future revisions will be posted on the website and available for download.

Notes regarding documentation in this manual are as follows:

- References to markings/labels on the unit are denoted in underline/bold. For example: HPF.

- Warnings will be preceded with WARNING.

Warnings - General

WARNING: Failure to read and observe notes and warnings may result in personal injury, and/or possible damage

to this device and your other equipment.

WARNING - LOSS OF HEARING: This device, as well as any device with a headphone amplifier, is capable of

driving the signal at levels that can be damaging to hearing. Always operate the headphone volume at the lowest

practical level. Do not wear the headphones over your ears in any of the following circumstances:

- While plugging the headphones into the headphone driving device.

- While plugging the mixer into the headphone driving device.

- While turning on or off the mixer.

- While turning on or off the phantom power.

- While plugging a device into the input of the mixer.

WARNING - RISK OF ELECTRICAL SHOCK: This device, its enclosure, and the connections to cable shields that

plug into this device are conductive. Avoid electrocution and observe caution with cable runs near areas where

high-voltages and/or currents may exist.

Checking Supplied I ems

Your package should include the following items:

- DN101 Accessory for CX Family of Low-Noise Preamps

- Stereo 3.5mm mini plug cable

- Flat head Phillips machine screw 4-40 thread, 3/16” length, undercut head

- Welcome Card:

oRead this User Manual

oSave your receipt in the event you require warranty service.

Page 4 www.juicedLink.com

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

General

Fea ures

•Accessory for CX Family of Low-Noise Preamps

oMounts directly to CX Preamp (requires minor modification to battery tray)

oUtilizes the battery of the CX Preamp

oSmall size

oAluminum chassis (black anodized) for EMI protection and rugged use

•Adds audio features that are missing from many DSLR cameras

oHeadphone Amplifier

oLevel Meter

oCamera Automatic Gain Control (AGC) disabling for improved signal-to-noise performance

•“Normal” and “AGC Disable” operation settings

oAutomatic meter recalibration and headphone gain adjustment for the different modes of operation

o“AGC Disable” uses a safe, stable, robust, and reliable method (not a tone) of forcing the AGC

amps in your camera down for improved signal-to-noise performance.

•Inputs

o3.5mm stereo minijack

oConnects to output of the CX Family Preamp

•Output

o3.5mm stereo minijack output connects to camera input

Panel Descrip ions

LEFT SIDE

1) 9V Battery Terminal

2) OUT - Output jack (to camera)

DN101 – Accessory for CX Family of Low-Noise Preamps Page 5

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

RIGHT SIDE

1) IN - Input jack (from CX Preamp output

2) Headphone output jack

FRONT PANEL

7 8

1) ON - Power Switch

2) Power LED

3) Level Meter

4) AGC DIS – “AGC Disable” / “Normal Operation” Switch

5) Headphone amplifier gain adjustment

6) LEV - AGC Disable signal level adjustment

7) M1 - Meter Level Adjustment for “Normal” operation

8) M2 - Meter Level Adjustment for “AGC Disable” operation

Page 6 www.juicedLink.com

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

Se ing up DN101 wi h he CX Preamp

Bol ing he DN101 o he CX Preamp

Turn over the CX preamp, and remove this screw:

Align the holes of the DN101 with the threaded hole left by the removed screw, and the threaded hole of the bottom

of the circuit board post:

Note: The DN101 must use/share the 9V battery with the CX preamp, and it must be placed in the CX battery

tray (per the instructions below). The DN101 will not operate properly if these instructions are not followed.

DN101 – Accessory for CX Family of Low-Noise Preamps Page 7

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

Replace the screw that was just removed back into the same position:

Use the additional screw provided with the DN101 to secure this position:

Page 8 www.juicedLink.com

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

Ba ery Tray Modifica ion

1. Remove the battery tray from the CX Pramp:

2. Remove the spring in the back of the battery try:

Make sure that you save the spring, in case you want to replace it later.

Note: The DN101 must use/share the 9V battery with the CX preamp, and it must be placed in the CX battery

tray (per the instructions below). The DN101 will not operate properly if these instructions are not followed.

DN101 – Accessory for CX Family of Low-Noise Preamps Page 9

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

3. Take a pair of cutters, and cut off this tongue:

4. Use the cutters to cut a notch in the front of the battery tray for a place for the DN101 wires to escape:

Page 10 www.juicedLink.com

NOTICE: The design objective for the DN101 was to fill the gap of missing key audio features in DLSR cameras, and support juicedLink’s

loyal CX Family of Preamplifier customers by providing them with a solution to protect their investment in their juicedLink preamps. As such,

use of the DN101 requires some modification to the CX Preamp. While these steps are easy and clearly explained in this document, they

require some basic tools, skills, and a little bit of your time and patience. We would greatly appreciate any comments on this manual that

will help enhance the experience of DN101 users as they are bringing up their system. jl_info@juicedLink.com

5. The battery tray now looks like this

6. Attach the battery leads to the 9V alkaline battery. Place the battery and leads into the battery tray with the

correct orientation (+ to +, - to -):

Indice

Altri manuali juicedLink Amplificatore

juicedLink

juicedLink DT414 Manuale utente

Manuali Amplificatore popolari di altre marche

ASTRO

ASTRO HVO V40 P Manuale utente

Marantz

Marantz SUPERSCOPE BLA-545 Istruzioni per il montaggio

NAD

NAD CI980 Manuale utente

Technics

Technics SE-CH770 Manuale utente

Harman Kardon

Harman Kardon HK6300 Manuale utente

NAD

NAD T975 Manuale utente

McIntosh

McIntosh MA6850 Manuale utente

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuale utente

Viatron

Viatron Autrix Manuale utente

GME

GME GA9800 Manuale utente

Atlas

Atlas CP700 Manuale utente

Roland

Roland KC-1000 Manuale utente

Pyle

Pyle PFMRA350BW Manuale utente

Advantage

Advantage S-250 Manuale utente

IRT Electronics

IRT Electronics DVA-3007 Manuale utente

Dimavery

Dimavery BA-100 Series Manuale utente

Sony

Sony XM-S400D Manuale utente

Schertler

Schertler ROY X Manuale utente

juicedLink DN101 Manuale utente

Manuali Amplificatore popolari di altre marche